Japanese pull saw

Saturday, December 07, 2024 JST     

Top Page > Product info > Details > F series

F series RAZORSAW CAST

CAST series features

For more details, click the image below.

-

-

-

-

-

-

There is a small hole on the rear end of the handle.

You can put a strap string in the small hole.

-

-

-

-

-

-

RAZORSAW CAST 200
Medium Teeth

Versatile saw with all-purpose teething.

If you are looking for a general hand saw for cutting all sorts of materials, such as general timber, green wood, and plastic, this is the one to choose.

Use

For timberman's, landscaping, woodworking, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

CAST series features Here

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body5123RAZORSAW CAST 200
Medium Teeth		200㎜0.7㎜1.05㎜ 2.2㎜4903524 3105865,430yen
Replacement BladeR512Replacement Blade for
RAZORSAW CAST 200
Medium Teeth		4903524 4105832,800yen

RAZORSAW CAST 200
Fine Teeth

Clean and smooth cuts with fine teething.

Extra-fine teeth are suited for cutting bamboo and for craft work. Can be used to prune bamboo in the forest.

Use

For bamboo felling, woodworking, wood crafts and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

CAST series features Here

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body5223RAZORSAW CAST 200
Fine Teeth		200㎜0.7㎜1.0㎜ 1.5㎜4903524 3105935,430yen
Replacement BladeR522Replacement Blade for
RAZORSAW CAST 200
Fine Teeth		4903524 4105902,800yen

RAZORSAW CAST 200
Large Teeth

Smooth cut to start with and powerful cut as you start cutting with full strokes.

Size of the tooth becomes smaller as it gets closer to the handle. It gives you powerful cut as you start cutting with full strokes.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General wood, and Composite wood panel

CAST series features Here

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body5323RAZORSAW CAST 200
Large Teeth		200㎜0.8㎜1.12㎜ 3.5-2.6㎜4903524 3106095,430yen
Replacement BladeR532Replacement Blade for
RAZORSAW CAST 200
Large Teeth		4903524 4106062,800yen

RAZORSAW CAST GARDEN 200
Medium Teeth

Cut thin and thick branches fast.

Size of the tooth becomes smaller as it gets closer to the handle. It gives you powerful cut as you start cutting with full strokes. Tapered Sentei pruning blade has bigger teeth, but cutting surface is clean.

Use

For pruning fruit trees, landscaping, and forestry work .

Materials

Green wood

CAST series features Here

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body5523RAZORSAW CAST GARDEN 200
Medium Teeth		200㎜1.3㎜1.3㎜ 3.5-2.8㎜4903524 3138226,100yen
Replacement BladeR552Replacement Blade for
RAZORSAW CAST GARDEN 200
Medium Teeth		4903524 4138293,300yen

RAZORSAW CAST GARDEN 200
Extra Large Teeth

Nicely cut surface with powerful cuts.

With a tapered blade, you can make clean cut even with large teeth with big teeth pitch.

Use

For landscaping, forestry work, and pruning fruit trees.

Materials

Green wood

CAST series features Here

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body5623RAZORSAW CAST GARDEN 200
Extra Large Teeth		200㎜1.3㎜1.3㎜ 4.0㎜4903524 3138396,100yen
Replacement BladeR562Replacement Blade for
RAZORSAW CAST GARDEN 200
Extra Large Teeth		4903524 4138363,300yen

RAZORSAW CAST GARDEN 200
Curve Large Teeth

Make powerful and fast cuts.

Curved pruning saws give you powerful cuts. They are best for felling.

Use

For landscaping, forestry work, and pruning fruit trees.

Materials

Green wood

CAST series features Here

Characteristics of the main body

For more details, click the icon.

  • Curved saws
    • Blade with tapered back and no sets. You can make powerful cuts with it. Like our pruning saw for green wood, they are ideal for forestry work.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved saw
    • Curved blade cuts branches more efficiently. For pruning branches, and not for woodworking.
  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body5723RAZORSAW CAST GARDEN 200
Curve Large Teeth		200㎜1.3㎜1.3㎜ 3.5㎜4903524 3138466,100yen
Replacement BladeR572Replacement Blade for
RAZORSAW CAST GARDEN 200
Curve Large Teeth		4903524 4138433,300yen

F series RAZORSAW Folding Saw

RAZORSAW ORIKOMI 200
All Purpose

Can be used to cut different materials.

If you are looking for a general hand saw for cutting all sorts of materials, such as general timber, green wood, and plastic, this is the one to choose. When it's folded, you can safely store it in your tool box without damaging the blade.

Use

For timberman's, landscaping, woodworking, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body810RAZORSAW ORIKOMI 200
All Purpose		200㎜0.7㎜1.05㎜ 2.2㎜4903524 0810113,180yen
Replacement BladeS-810Replacement Blade for
RAZORSAW ORIKOMI 200
All Purpose		4903524 2810151,800yen

RAZORSAW ORIKOMI 250
All Purpose

If you are not sure which saw to choose, choose all purpose folding saw!

This is the saw for people who want to cut different kinds of materials such as general timber, green wood, and plastic. When it's folded, you can safely store it in your tool box.

Use

For timberman's, landscaping, woodworking, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body812RAZORSAW ORIKOMI 250
All Purpose		250㎜0.8㎜1.13㎜ 2.5㎜4903524 0812193,750yen
Replacement BladeS-812Replacement Blade for
RAZORSAW ORIKOMI 250
All Purpose		4903524 2812132,000yen

RAZORSAW ORIKOMI 200
Extra-Fine Teeth

Best cutting quality and clean cutting surface!

Extra-fine teeth are suited for cutting bamboo and for craft work. Can be used to prune bamboo in the forest.

Use

For bamboo felling, woodworking, wood crafts and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body814RAZORSAW ORIKOMI 200
Extra-Fine Teeth		200㎜0.7㎜1.0㎜ 1.5㎜4903524 0814173,180yen
Replacement BladeS-814Replacement Blade for
RAZORSAW ORIKOMI 200
Extra-Fine Teeth		4903524 2814111,800yen

RAZORSAW ORIKOMI 250
Extra-Fine Teeth

Good for wood crafts too!

Extra-fine teeth are suited for cutting bamboo and for craft work. Can be used to prune bamboo in the forest.

Use

For bamboo felling, woodworking, wood crafts and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body815RAZORSAW ORIKOMI 250
Extra-Fine Teeth		250㎜0.8㎜1.1㎜ 1.7㎜4903524 0815163,750yen
Replacement BladeS-815Replacement Blade for
RAZORSAW ORIKOMI 250
Extra-Fine Teeth		4903524 2815102,000yen

RAZORSAW ORIKOMI 200
Large Teeth

Smooth and easy cut to start, and powerful cut as you start cutting with full strokes.

Size of the tooth becomes smaller as it gets closer to the handle. It gives you powerful cut as you start cutting with full strokes. If you would like to keep the saw in your tool box, we recommend a folding saw.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General wood, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body811RAZORSAW ORIKOMI 200
Large Teeth		200㎜0.8㎜1.12㎜ 3.5-2.6㎜4903524 0811103,180yen
Replacement BladeS-811Replacement Blade for
RAZORSAW ORIKOMI 200
Large Teeth		4903524 2811141,800yen

RAZORSAW ORIKOMI 250
Large Teeth

For landscaping and frame working!

The size of the tooth is biggest on the tip of the blade, and it gradually becomes smaller towards the handle. Such structure gives you a powerful cut.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General wood, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body813RAZORSAW ORIKOMI 250
Large Teeth		250㎜0.85㎜1.17㎜ 3.6-2.7㎜4903524 0813183,750yen
Replacement BladeS-813Replacement Blade for
RAZORSAW ORIKOMI 250
Large Teeth		4903524 2813122,000yen

F series FD

RAZORSAW FD-20A All Purpose

Can be used for different purposes!

By putting some rip teeth in between crosscut teeth, you can make clean cuts across the grain, parallel to the grain, and diagonally to the grain. It gives you smooth cut with clean cutting surface.

Use

For timberman's, landscaping, woodworking, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body840RAZORSAW FD-20A All Purpose200㎜0.7㎜1.05㎜ 2.2㎜4903524 0840123,830yen
Replacement BladeS-840Replacement Blade for
RAZORSAW FD-20A All Purpose		4903524 2840161,800yen

RAZORSAW FD-20B Bamboo

For smooth cuts and clean cutting surface!

They have special teeth for cutting bamboos. You can make clean cuts.

Use

For bamboo felling, woodworking, wood crafts, and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body842RAZORSAW FD-20B Bamboo200㎜0.7㎜1.0㎜ 1.5㎜4903524 0842103,830yen
Replacement BladeS-842Replacement Blade for
RAZORSAW FD-20B Bamboo		4903524 2842141,800yen

RAZORSAW FD-20T Timberman's

Tapered blade with some rip teeth.

You can cut along, across, and diagonally to the grain, so it's suited for cutting materials with complicated fiber pattern.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body845RAZORSAW FD-20T Timberman's200㎜1.1㎜1.15㎜ 3.0㎜4903524 0845174,080yen
Replacement BladeS-845Replacement Blade for
RAZORSAW FD-20T TimberTimberman's		4903524 2845112,050yen

RAZORSAW FD-20J Plastic

Special teeth for cutting plastic!

Tough teeth cut PVC pipes and hard materials smooth and clean.

Use

For PVC piping work, and cutting plastic.

Materials

PVC pipe, Acrylic resin, and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip teeth with special edges for cutting plastic.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for plastic
    • Our plastic saws have rip teeth with some characteristics of crosscut teeth for cutting plastic that have no fiber.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body843RAZORSAW FD-20J Plastic200㎜0.6㎜0.9㎜ 1.5㎜4903524 0843193,830yen
Replacement BladeS-843Replacement Blade for
RAZORSAW FD-20J Plastic		4903524 2843131,800yen

RAZORSAW FD-20G Green Wood

Folding saw for green wood!

Smooth cutting to start with, and powerful cut as you start cutting with full strokes.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General wood, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body841RAZORSAW FD-20G Green Wood200㎜0.8㎜1.12㎜ 3.5-2.6㎜4903524 0841113,830yen
Replacement BladeS-841Replacement Blade for
RAZORSAW FD-20G Green Wood		4903524 2841151,800yen

RAZORSAW FD-20F Fruit Tree

Compact folding saw for fruit trees!

Medium size teeth do not shake the branches as much as large teeth. This makes clean cuts and prevent damaging the trees.

Use

For pruning fruit trees and general green wood.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Two-step angle adjustment
    • The handle can be adjusted to two different angles.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body844RAZORSAW FD-20F Fruit Tree200㎜0.7㎜1.0㎜ 2.2㎜4903524 0844183,830yen
Replacement BladeS-844Replacement Blade for
RAZORSAW FD-20F Fruit Tree		4903524 2844121,800yen

List of F series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body5123RAZORSAW CAST 200
Medium Teeth		200㎜0.7㎜1.05㎜2.2㎜4903524 3105865,430yen
Replacement BladeR512Replacement Blade for
RAZORSAW CAST 200
Medium Teeth		4903524 4105832,800yen
Main Body5223RAZORSAW CAST 200
Fine Teeth		200㎜0.7㎜1.0㎜1.5㎜4903524 3105935,430yen
Replacement BladeR522Replacement Blade for
RAZORSAW CAST 200
Fine Teeth		4903524 4105902,800yen
Main Body5323RAZORSAW CAST 200
Large Teeth		200㎜0.8㎜1.12㎜3.5-2.6㎜4903524 3106095,430yen
Replacement BladeR532Replacement Blade for
RAZORSAW CAST 200
Large Teeth		4903524 4106062,800yen
Main Body5523RAZORSAW CAST GARDEN 200
Medium Teeth		200㎜1.3㎜1.3㎜3.5-2.8㎜4903524 3138226,100yen
Replacement BladeR552Replacement Blade for
RAZORSAW CAST GARDEN 200
Medium Teeth		4903524 4138293,300yen
Main Body5623RAZORSAW CAST GARDEN 200
Extra Large Teeth		200㎜1.3㎜1.3㎜4.0㎜4903524 3138396,100yen
Replacement BladeR562Replacement Blade for
RAZORSAW CAST GARDEN 200
Extra Large Teeth		4903524 4138363,300yen
Main Body5723RAZORSAW CAST GARDEN 200
Curve Large Teeth		200㎜1.3㎜1.3㎜3.5㎜4903524 3138466,100yen
Replacement BladeR572Replacement Blade for
RAZORSAW CAST GARDEN 200
Curve Large Teeth		4903524 4138433,300yen
Main Body810RAZORSAW ORIKOMI 200
All Purpose		200㎜0.7㎜1.05㎜2.2㎜4903524 0810113,180yen
Replacement BladeS-810Replacement Blade for
RAZORSAW ORIKOMI 200
All Purpose		4903524 2810151,800yen
Main Body812RAZORSAW ORIKOMI 250
All Purpose		250㎜0.8㎜1.13㎜2.5㎜4903524 0812193,750yen
Replacement BladeS-812Replacement Blade for
RAZORSAW ORIKOMI 250
All Purpose		4903524 2812132,000yen
Main Body814RAZORSAW ORIKOMI 200
Extra-Fine Teeth		200㎜0.7㎜1.0㎜1.5㎜4903524 0814173,180yen
Replacement BladeS-814Replacement Blade for
RAZORSAW ORIKOMI 200
Extra-Fine Teeth		4903524 2814111,800yen
Main Body815RAZORSAW ORIKOMI 250
Extra-Fine Teeth		250㎜0.8㎜1.1㎜1.7㎜4903524 0815163,750yen
Replacement BladeS-815Replacement Blade for
RAZORSAW ORIKOMI 250
Extra-Fine Teeth		4903524 2815102,000yen
Main Body811RAZORSAW ORIKOMI 200
Large Teeth		200㎜0.8㎜1.12㎜3.5-2.6㎜4903524 0811103,180yen
Replacement BladeS-811Replacement Blade for
RAZORSAW ORIKOMI 200
Large Teeth		4903524 2811141,800yen
Main Body813RAZORSAW ORIKOMI 250
Large Teeth		250㎜0.85㎜1.17㎜3.6-2.7㎜4903524 0813183,750yen
Replacement BladeS-813Replacement Blade for
RAZORSAW ORIKOMI 250
Large Teeth		4903524 2813122,000yen
Main Body840RAZORSAW FD-20A All Purpose200㎜0.7㎜1.05㎜2.2㎜4903524 0840123,830yen
Replacement BladeS-840Replacement Blade for
RAZORSAW FD-20A All Purpose		4903524 2840161,800yen
Main Body842RAZORSAW FD-20B Bamboo200㎜0.7㎜1.0㎜1.5㎜4903524 0842103,830yen
Replacement BladeS-842Replacement Blade for
RAZORSAW FD-20B Bamboo		4903524 2842141,800yen
Main Body845RAZORSAW FD-20T Timberman's200㎜1.1㎜1.15㎜3.0㎜4903524 0845174,080yen
Replacement BladeS-845Replacement Blade for
RAZORSAW FD-20T TimberTimberman's		4903524 2845112,050yen
Main Body843RAZORSAW FD-20J Plastic200㎜0.6㎜0.9㎜1.5㎜4903524 0843193,830yen
Replacement BladeS-843Replacement Blade for
RAZORSAW FD-20J Plastic		4903524 2843131,800yen
Main Body841RAZORSAW FD-20G Green Wood200㎜0.8㎜1.12㎜3.5-2.6㎜4903524 0841113,830yen
Replacement BladeS-841Replacement Blade for
RAZORSAW FD-20G Green Wood		4903524 2841151,800yen
Main Body844RAZORSAW FD-20F Fruit Tree200㎜0.7㎜1.0㎜2.2㎜4903524 0844183,830yen
Replacement BladeS-844Replacement Blade for
RAZORSAW FD-20F Fruit Tree		4903524 2844121,800yen
*Although Replacement Blades listed above are compatible, longer teeth might not exactly fit in the handle when it's folded.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.