Japanese pull saw

Friday, June 14, 2024 JST     

Top Page > Product info > Details > G series

Woodworking saw Promotion Video


Lineup

SUPER HARD 06-240, SUPER HARD 06-240 TPE, SUPER HARD 06-270, and SUPER HARD 06-270 TPE

For carpentry work. They are available in two styles. One is the traditional rattan handle and the other one is TPE GRIP. Available in two blade length, 240mm and 270mm.


G series Woodworking

SUPER HARD 06-240

Best cutting quality!

Traditional rattan handle with 0.6mm thick woodworking saw. The blade is thick and tough, and easy to handle.

Use

For woodworking, carpentry work, and making furnitures.

Materials

Laminated wood, General wood, Composite wood panel, MDF panel, Particle board (OSB), and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Woodworking
    • Ideal for carpentry work and DIY. Woodworking saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body410SUPER HARD 06-240240㎜0.6㎜0.9㎜ 1.5㎜4903524 0410155,100yen
Replacement BladeS-410Replacement Blade for
SUPER HARD 06-240
4903524 2410192,130yen

SUPER HARD 06-240 TPE

Short metal spine allows you to cut through the material!

A TPE grip that uses elastomer resin for the entire grip and does not slip anywhere. They are 0.6mm thick woodworking saw. Blades are thick and easy to handle.

Use

For woodworking, carpentry work, and making furnitures.

Materials

Laminated wood, General timber, Composite wood panel, MDF panel, Particle board (OSB), and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Woodworking
    • Ideal for carpentry work and DIY. Woodworking saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body412SUPER HARD 06-240 TPE240㎜0.6㎜0.9㎜ 1.5㎜4903524 0412134,200yen
Replacement BladeS-410Replacement Blade for
SUPER HARD 06-240
4903524 2410192,130yen

SUPER HARD 06-270

Great for carpentry work!

They are woodworking saw with a traditional rattan handle with 0.6mm thick blade. The blade is thick and tough, also easy to handle.

Use

For woodworking, carpentry work, and making furnitures.

Materials

Laminated wood, General timber, Composite wood panel, MDF panel, Particle board (OSB), and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Woodworking
    • Ideal for carpentry work and DIY. Woodworking saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body450SUPER HARD 06-270270㎜0.6㎜0.93㎜ 1.7㎜4903524 0450135,480yen
Replacement BladeS-450Replacement Blade for
SUPER HARD 06-270
4903524 2450172,350yen

SUPER HARD 06-270 TPE

Great carpentry saw!

A TPE grip that uses elastomer resin for the entire grip and does not slip anywhere. They are 0.6mm thick woodworking saw. Blades are thick and easy to handle.

Use

For woodworking, carpentry work, and making furnitures.

Materials

Laminated wood, General timber, Composite wood panel, MDF panel, Particle board (OSB), and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Woodworking
    • Ideal for carpentry work and DIY. Woodworking saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body453SUPER HARD 06-270 TPE270㎜0.6㎜0.93㎜ 1.7㎜4903524 0453104,450yen
Replacement BladeS-450Replacement Blade for
SUPER HARD 06-270
4903524 2450172,350yen

PROTON POWER SAW IBARAME

Best cutting quality!

Traditional rattan handle with 0.6mm thick woodworking saw. The blade is thick and tough, and easy to handle.

Use

For woodworking, carpentry work, and furniture making.

Materials

Laminated Wood, General Timber, Composite Wood Panel, MDF Panel, Particle Board (OSB), and Plywood

Characteristics of the main body

For more details, click the icon.

  • Woodworking
    • Ideal for carpentry work and DIY. Woodworking saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body400PROTON POWER SAW IBARAME240㎜0.6㎜0.9㎜ 1.9㎜4903524 040001open price
Replacement BladeS-400Replacement Blade for
PROTON POWER SAW IBARAME
4903524 243006open price

PROTON POWER SAW EDOME

Best cutting quality!

Traditional rattan handle with 0.6mm thick woodworking saw. The blade is thick and tough, and easy to handle.

Use

For woodworking, carpentry work, and making furnitures.

Materials

Laminated wood, General timber, Composite wood panel, MDF panel, Particle board (OSB), and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Woodworking
    • Ideal for carpentry work and DIY. Woodworking saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body405PROTON POWER SAW EDOME240㎜0.6㎜0.9㎜ 1.7㎜4903524 040506open price
Replacement BladeS-405Replacement Blade for
PROTON POWER SAW EDOME
4903524 240500open price

Bamboo saw Promotion Video


Lineup

TAKEHIKI NOKO 240, TAKEHIKI NOKO 240 TPEGRIP, TAKEHIKI NOKO 330 EVAGRIP

Special teeth for cutting bamboo. We offer them in two sizes, 240mm and 330mm. Can be used for both pruning and craft work.

G series Bamboo

TAKEHIKI NOKO 240

Special teeth for cutting bamboo!

They come with a traditional rattan handle. The blade thickness is 0.6mm. They have tough teeth that can cut through bamboo fiber.

Use

For bamboo crafts, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body420TAKEHIKI NOKO 240240㎜0.6㎜0.9㎜ 1.7㎜4903524 0420054,930yen
Replacement BladeS-420Replacement Blade for
TAKEHIKI NOKO 240
4903524 2420092,050yen

TAKEHIKI NOKO 240 TPE

Amazing cutting quality!

A TPE grip that uses elastomer resin for the entire grip and does not slip anywhere. They are 0.6mm thick bamboo saw.

Use

For bamboo crafts, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body421TAKEHIKI NOKO 240 TPE240㎜0.6㎜0.9㎜ 1.7㎜4903524 0421114,000yen
Replacement BladeS-420Replacement Blade for
TAKEHIKI NOKO 240
4903524 2420092,050yen

List of G series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body410SUPER HARD 06-240240㎜0.6㎜0.9㎜1.5㎜4903524 0410155,100yen
Main Body412SUPER HARD 06-240 TPE4903524 0412134,200yen
Replacement BladeS-410Replacement Blade for
SUPER HARD 06-240
4903524 2410192,130yen
Main Body450SUPER HARD 06-270270㎜0.6㎜0.93㎜1.7㎜4903524 0450135,480yen
Main Body453SUPER HARD 06-270 TPE4903524 0453104,450yen
Replacement BladeS-450Replacement Blade for
SUPER HARD 06-270
4903524 2450172,350yen
Main Body400PROTON POWER SAW IBARAME240㎜0.6㎜0.9㎜1.9㎜4903524 040001open price
Replacement BladeS-400Replacement Blade for
PROTON POWER SAW IBARAME
4903524 243006open price
Main Body405PROTON POWER SAW EDOME240㎜0.6㎜0.9㎜1.7㎜4903524 040506open price
Replacement BladeS-405Replacement Blade for
PROTON POWER SAW EDOME
4903524 240500open price
Main Body420TAKEHIKI NOKO 240240㎜0.6㎜0.9㎜1.7㎜4903524 0420054,930yen
Main Body421TAKEHIKI NOKO 240 TPE4903524 0421114,000yen
Replacement BladeS-420Replacement Blade for
TAKEHIKI NOKO 240
4903524 2420092,050yen
*The blades listed above are compatible.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.