Japanese pull saw

Sunday, February 25, 2024 JST     

Top Page > Product info > Details > A series

Dozuki Promotion Video


Lineup

Razorsaw A with rattan handle, Razorsaw A with TPE GRIP, Razorsaw ZA with rattan handle, and Razorsaw ZA with TPE GRIP

You can make fine cuts, and they are ideal for craft work. The blade is only 0.3mm thick. They come in two different styles, A and ZA. Razorsaw A is our regular craft saw, and Razorsaw ZA has a curved tip which you can use to make holes on a flat surface. Available with a traditional rattan handle or TPE grip.


Product infomation A series Lineup

RAZORSAW A

Great for craft work for making fine cuts!

0.3mm thin blade with a traditional rattan handle. They are great for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures, and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for woodworking. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body300RAZORSAW A240㎜0.3㎜0.51㎜ 1.5㎜4903524 0300025,930yen
Replacement BladeS-300Replacement Blade for
RAZORSAW A
4903524 2300062,280yen

RAZORSAW A TPE

Fine cut saw with the best cutting quality!

A TPE grip that uses elastomer resin for the entire grip and does not slip anywhere. The blade is just 0.3mm thick. They are ideal for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures, and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for woodworking. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body301RAZORSAW A TPE240㎜0.3㎜0.51㎜ 1.5㎜4903524 0301184,960yen
Replacement BladeS-300Replacement Blade for
RAZORSAW A
4903524 2300062,280yen

RAZORSAW ZA

Curved tip for craft work!

0.3mm thin blade with a traditional rattan handle. They are great for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for woodworking. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body306RAZORSAW ZA240㎜0.3㎜0.51㎜ 1.5㎜4903524 0300266,380yen
Replacement BladeS-306Replacement Blade for
RAZORSAW ZA
4903524 2300202,530yen

RAZORSAW ZA TPE

Saiku fine cut saw that can cut holes.

A TPE grip that uses elastomer resin for the entire grip and does not slip anywhere. The blade is just 0.3mm thick. You can make holes on a flat surface using the curved tip. Long back metal holds the blade firmly.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for woodworking. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body307RAZORSAW ZA TPE240㎜0.3㎜0.51㎜ 1.5㎜4903524 0307125,380yen
Replacement BladeS-306Replacement Blade for
RAZORSAW ZA
4903524 2300202,530yen

RAZORSAW TATEBIKI

For making tenons and for cutting hard wood!

Rip teeth are good for both rip cutting and cross cutting, and for making tenons. Rip teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For cutting plastic, wood crafts, making furnitures, DIY, carpentry work, scalpturing, etc.

Materials

Acrylic resin, Formica Laminate, Ebony, Rose wood, Decking material, PVC pipe, General timber, Laminated wood, and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Rip cut
    • They are for both cross cutting and rip cutting. It's ideal for cutting harder wood such as decking materials.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip teeth
    • By making rip cut edges on crosscut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body303RAZORSAW TATEBIKI240㎜0.3㎜0.52㎜ 1.5㎜4903524 030316open price
Replacement BladeS-303Replacement Blade for
RAZORSAW TATEBIKI
4903524 230310open price

RAZORSAW TATEBIKI TPE

For making tenons and for cutting hard wood!

Rip teeth are good for both rip cutting and cross cutting, and for making tenons. Rip teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For precision woodworking, bamboo crafts, carpentry work, making furnitures and musical instruments.

Materials

General timber, Deking material, Ply wood, Laminated wood, Ebony, Rose wood, Formica Laminate, MDF panel, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Rip cut
    • They are for both cross cutting and rip cutting. It's ideal for cutting harder wood such as decking materials.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip teeth
    • By making rip cut edges on crosscut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body304RAZORSAW TATEBIKI TPE240㎜0.3㎜0.52㎜ 1.5㎜4903524 400683open price
Replacement BladeS-304Replacement Blade for
RAZORSAW TATEBIKI
4903524 230310open price

SUN CHILD

For making tenons and for cutting hard wood!

Rip teeth are good for both rip cutting and cross cutting, and for making tenons. Rip teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For precision woodworking, bamboo craft, carpentry work, furniture making, and musical instrument making.

Materials

General Timber, Decking Material, Plywood, Laminated Wood, Ebony, Rose Wood, Formica Laminate, MDF Panel, and Acrylic Resin

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for woodworking. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip teeth
    • By making rip cut edges on crosscut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body311SUN CHILD240㎜0.3㎜0.51㎜ 1.3㎜4903524 031115open price
Replacement BladeS-311Replacement Blade for
SUN CHILD
4903524 231119open price

List of A series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body300RAZORSAW A240㎜0.3㎜0.51㎜1.5㎜4903524 0300025,930yen
Main Body301RAZORSAW A TPE4903524 0301184,960yen
Replacement BladeS-300Replacement Blade for
RAZORSAW A
4903524 2300062,280yen
Main Body306RAZORSAW ZA240㎜0.3㎜0.51㎜1.5㎜4903524 0300266,380yen
Main Body307RAZORSAW ZA TPE4903524 0307125,380yen
Replacement BladeS-306Replacement Blade for
RAZORSAW ZA
4903524 2300202,530yen
Main Body303RAZORSAW TATEBIKI240㎜0.3㎜0.52㎜1.5㎜4903524 030316open price
Replacement BladeS-303Replacement Blade for
RAZORSAW TATEBIKI
4903524 230310open price
Main Body304RAZORSAW TATEBIKI TPE240㎜0.3㎜0.52㎜1.5㎜4903524 400683open price
Replacement BladeS-304Replacement Blade for
RAZORSAW TATEBIKI
4903524 230310open price
Main Body311SUN CHILD240㎜0.3㎜0.51㎜1.3㎜4903524 031115open price
Replacement BladeS-311Replacement Blade for
SUN CHILD
4903524 231119open price
*The blades listed above are compatible. They fit on both rattan handle and TPE GRIP.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.