Japanese pull saw

Saturday, December 07, 2024 JST     

Top Page > Product info > Details > C D E J series

RAZORSAW 180 series Promotion Video


Line up

Dozuki Extra Fine --- Razorsaw 180 DOZUKI, Razorsaw 180 DOZUKI Rattan Handle
Dozuki Fine --- Razorsaw 180 KOMAME, Razorsaw 180 KOMAME Rattan Handle
Dozuki --- Razorsaw 180 USUBA, Razorsaw 180 USUBA Rattan Handle
Woodworking --- Razorsaw 180 ATSUBA, Razorsaw 180 ATSUBA Rattan Handle
Double edge --- Razorsaw 180 RYOBA, Razorsaw 180 RYOBA Rattan Handle
Plastic --- Razorsaw 180 JUSHI, Razorsaw 180 JUSHI Rattan Handle

180mm series are small, so you can put them in your tool box. There are 6 types of blades for cutting different materials.

Dozuki Extra Fine ( C series )

RAZORSAW 180 DOZUKI

Small handy saw for professionals!

TPE resin is used for the entire grip, and it can be used according to the application and preference. A hook hole is added to the grip end. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. The long metal spline holds the blade firmly in place.

Use

For precision woodworking, bamboo crafts, DIY, carpentry work, making furnitures, etc.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF Panel, Particle board (OSB), and Formica Laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both crosscuts and rip cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body297RAZORSAW 180 DOZUKI180㎜0.3㎜0.46㎜ 1.0㎜4903524 0297163,330yen
Replacement BladeS-297Replacement Blade for
RAZORSAW 180 DOZUKI
4903524 2297101,950yen

RAZORSAW 180 DOZUKI Rattan Handle

Small handy saw for professionals!

0.3mm thin blade with a traditional rattan handle. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. The long metal spline holds the blade firmly in place.

Use

For precision woodworking, bamboo crafts, DIY, carpentry work, making furnitures, etc.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF Panel, Particle board (OSB), and Formica Laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both crosscuts and rip cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body297WRAZORSAW 180 DOZUKI Rattan Handle180㎜0.3㎜0.46㎜ 1.0㎜4903524 300259open price
Replacement BladeS-297Replacement Blade for
RAZORSAW 180 DOZUKI
4903524 2297101,950yen

List of C series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body297RAZORSAW 180 DOZUKI180㎜0.3㎜0.46㎜1.0㎜4903524 0297163,330yen
Main Body297WRAZORSAW 180 DOZUKI Rattan Handle4903524 300259open price
Replacement BladeS-297Replacement Blade for
RAZORSAW 180 DOZUKI
4903524 2297101,950yen
*Products listed above have compatible blades.

Dozuki Fine ( D series )

RAZORSAW 180 KOMAME

Small handy saw for professionals!

Razorsaw 180 KOMAME has small teeth which allows extremely clean cuts to ensures optimum performance. TPE resin is used for the entire grip, and it can be used for all kind of precise cuttings you would like. A hook hole added to the grip end. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. It comes with long metal spline that can hold the blade firmly in place (or together.)

Use

For precision woodworking, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both crosscuts and rip cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body292RAZORSAW 180 KOMAME180㎜0.3㎜0.46㎜ 1.0㎜4903524 029211open price
Replacement BladeS-292Replacement Blade for
RAZORSAW 180 KOMAME
4903524 229215open price

RAZORSAW 180 KOMAME Rattan Handle

Small handy saw for professionals!

0.3mm thin blade with a traditional rattan handle. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. The long metal spline holds the blade firmly in place.

Use

For precision woodworking, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both crosscuts and rip cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body292WRAZORSAW 180 KOMAME Rattan Handle180㎜0.3㎜0.46㎜ 1.0㎜4903524 300228open price
Replacement BladeS-292Replacement Blade for
RAZORSAW 180 KOMAME
4903524 229710open price

Dozuki

RAZORSAW 180 USUBA

It's small, but very handy!

TPE resin is used for the entire grip, and it can be used according to the application and preference. A hook hole is added to the grip end. The blade is 0.3mm thick with TPE grip. The tip of the blade is curved, so you can cut a hole on a flat surface.

Use

For wood crafts, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for woodworking. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body290RAZORSAW 180 USUBA180㎜0.3㎜0.51㎜ 1.5㎜4903524 0290132,850yen
Replacement BladeS-290Replacement Blade for
RAZORSAW 180 USUBA
4903524 2290171,550yen
*It is compatible with TRONC 180 USUBA. Click here for details.

RAZORSAW 180 USUBA Rattan Handle

It's small, but very handy!

0.3mm thin blade with a traditional rattan handle. The tip of the blade is curved, so you can cut a hole on a flat surface.

Use

For wood crafts, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for woodworking. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body290WRAZORSAW 180 USUBA Rattan Handle180㎜0.3㎜0.51㎜ 1.5㎜4903524 300204open price
Replacement BladeS-290Replacement Blade for
RAZORSAW 180 USUBA
4903524 2290171,550yen

Plastic

RAZORSAW 180 JUSHI

Rip cut Crosscut, Combined use.

0.3mm thick rip cut saw with TPE grip. Rip cut saws can be used to make crosscuts too. The teeth are for tough work, so you can cut hard materials such as decking material and plastic. They have long metal spline that firmly attaches a blade onto the handle.

Use

For cutting plastic, wood crafts, carpentry work, DIY, making furnitures, sculpturing and musical instruments.

Materials

Acrylic resin, Formica laminate, Ebony, Rose wood, Deking material, PVC, General timber, Laminated wood, and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip teeth with special edges for cutting plastic.
  • Rip cut
    • They are for both cross cutting and rip cutting. It's ideal for cutting harder wood such as decking materials.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip teeth
    • By making rip cut edges on crosscut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body295RAZORSAW 180 JUSHI180㎜0.3㎜0.52㎜ 1.5㎜4903524 0295182,850yen
Replacement BladeS-295Replacement Blade for
RAZORSAW 180 JUSHI
4903524 2295121,550yen

RAZORSAW 180 JUSHI Rattan Handle

Rip cut Crosscut, Combined use.

0.3mm thick rip cut saw with rattan handle. Rip cut saws can be used to make crosscuts too. The teeth are for tough work, so you can cut hard materials such as decking material and plastic. They have long metal spline that firmly attaches a blade onto the handle.

Use

For cutting plastic, wood crafts, carpentry work, DIY, making furnitures, sculpturing and musical instruments.

Materials

Acrylic resin, Formica laminate, Ebony, Rose wood, Deking material, PVC, General timber, Laminated wood, and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip teeth with special edges for cutting plastic.
  • Rip cut
    • They are for both cross cutting and rip cutting. It's ideal for cutting harder wood such as decking materials.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip teeth
    • By making rip cut edges on crosscut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body295WRAZORSAW 180 JUSHI Rattan Handle180㎜0.3㎜0.52㎜ 1.5㎜4903524 300242open price
Replacement BladeS-295Replacement Blade for
RAZORSAW 180 JUSHI
4903524 2295121,550yen

List of D series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body290RAZORSAW 180 USUBA180㎜0.3㎜0.51㎜1.5㎜4903524 0290132,850yen
Main Body290WRAZORSAW 180 USUBA Rattan Handle4903524 300204open price
Replacement BladeS-290Replacement Blade for
RAZORSAW 180 USUBA
4903524 2290171,550yen
Main Body292RAZORSAW 180 KOMAME180㎜0.3㎜0.46㎜1.0㎜4903524 029211open price
Main Body292WRAZORSAW 180 KOMAME Rattan Handle4903524 300228open price
Replacement BladeS-292Replacement Blade for
RAZORSAW 180 KOMAME
4903524 229710open price
Main Body295RAZORSAW 180 JUSHI180㎜0.3㎜0.52㎜1.5㎜4903524 0295182,850yen
Main Body295WRAZORSAW 180 JUSHI Rattan Handle4903524 300242open price
Replacement BladeS-295Replacement Blade for
RAZORSAW 180 JUSHI
4903524 2295121,550yen
*Products listed above have compatible blades.

WoodWorking ( E series )

RAZORSAW 180 ATSUBA

You can cut along, across, and diagonally to the grain.

TPE resin is used for the entire grip, and it can be used for any kind of application and preference. A hook hole added to the grip end. It is a 0.5mm thick woodworking saw. The blade is thick, tough, and easy to use.

Use

For DIY; wood crafts, carpentry work, making furnitures, musical instruments, and bamboo crafts.

Materials

Laminated wood, General timber, Composite wood panel, MDF panel, Particle board (OSB), Ply wood, and Bamboo material

Characteristics of the main body

For more details, click the icon.

  • Woodworking
    • Ideal for carpentry work and DIY. Woodworking saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body293RAZORSAW 180 ATSUBA180㎜0.5㎜0.81㎜ 1.5㎜4903524 0293102,850yen
Replacement BladeS-293Replacement Blade for
RAZORSAW 180 ATSUBA
4903524 2293141,550yen
*It is compatible with TRONC 180 ATSUBA. Click here for details.

RAZORSAW 180 ATSUBA Rattan Handle

You can cut along, across, and diagonally to the grain.

Rattan handle is made out of elastomer resin. It's a 0.5mm thick woodworking saw. The blade is thick and tough and easy to use.

Use

For DIY; wood crafts, carpentry work, making furnitures, musical instruments, and bamboo crafts.

Materials

Laminated wood, General timber, Composite wood panel, MDF panel, Particle board (OSB), Ply wood, and Bamboo material

Characteristics of the main body

For more details, click the icon.

  • Woodworking
    • Ideal for carpentry work and DIY. Woodworking saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body293WRAZORSAW 180 ATSUBA Rattan Handle180㎜0.5㎜0.81㎜ 1.5㎜4903524 300235open price
Replacement BladeS-293Replacement Blade for
RAZORSAW 180 ATSUBA
4903524 2293141,550yen

List of E series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body293RAZORSAW 180 ATSUBA180㎜0.5㎜0.81㎜1.5㎜4903524 0293102,850yen
Main Body293WRAZORSAW 180 ATSUBA Rattan Handle4903524 300235open price
Replacement BladeS-293Replacement Blade for
RAZORSAW 180 ATSUBA
4903524 2293141,550yen
*Products listed above have compatible blades.

Double edge ( J series )

RAZORSAW 180 RYOBA

Small, but very handy!

TPE resin is used for the entire grip, and it can be used according to the application and preference. A hook hole is added to the grip end. You can make both crosscuts and rip cuts with a double edge saw. They are great for craft work and woodworking.

Use

For DIY, wood crafts, carpentry work, making furnitures, sculpturing, musical instruments, and bamboo crafts.

Materials

Particle board (OSB), MDF panel, General timber, Laminated wood, Composite wood panel, and Bamboo material

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body291RAZORSAW 180 RYOBA180㎜0.5㎜0.81㎜
0.79㎜
1.5㎜
3.7-2.7㎜
4903524 0291122,980yen
Replacement BladeS-291Replacement Blade for
RAZORSAW 180 RYOBA
4903524 2291161,680yen
*Cutting width and teeth pitch on the first row are for crosscut teeth, and the ones on the second row are for rip teeth.
*It is compatible with TRONC 180 RYOBA. Click here for details.

RAZORSAW 180 RYOBA Rattan Handle

Small, but very handy!

You can make both crosscuts and rip cuts with a double edge saw. They are great for craft work and woodworking.

Use

For DIY, wood crafts, carpentry work, making furnitures, sculpturing, musical instruments, and bamboo crafts.

Materials

Particle board (OSB), MDF panel, General timber, Laminated wood, Composite wood panel, and Bamboo material

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body291WRAZORSAW 180 RYOBA Rattan Handle180㎜0.5㎜0.81㎜
0.79㎜
1.5㎜
3.7-2.7㎜
4903524 300211open price
Replacement BladeS-291Replacement Blade for
RAZORSAW 180 RYOBA
4903524 2291161,680yen

List of J series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body291RAZORSAW 180 RYOBA180㎜0.5㎜0.81㎜
0.79㎜
1.5㎜
3.7-2.7㎜
4903524 0291122,980yen
Main Body291WRAZORSAW 180 RYOBA Rattan Handle4903524 300211open price
Replacement BladeS-291Replacement Blade for
RAZORSAW 180 RYOBA
4903524 2291161,680yen
*Products listed above have compatible blades.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.