Japanese pull saw

Sunday, January 25, 2026 JST     

Top Page > Product info > Details > X series

X series

Keyhole pull saw

Cutter saw with Keyhole pull saw!

Adopts a cutter type that is easy to carry and a thick blade type that is easy to turn. Drilling is possible at the tip. Keyhole saw that can be cut by pulling.

Use

Electrical construction work, Interior construction, Plumbing

Materials

Gypsum board, Keikal board, Plywood

Characteristics of the main body

For more details, click the icon.

  • Keyhole pull saw
    • It is a compact keyhole pull saw that is compact and portable. Curve cutting can be performed smoothly by adopting a thick blade.
  • Thick blade cutter saw
    • The board thickness is 0.9mm, Uses a strong blade that is strong and easy to turn. Only the X series body can be installed.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Pull stroke cuting
    • The blade is cut when pressed.
  • Drillable with tip blade
    • The tip has an arrow shape, so you can start cutting after drilling a hole.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of X Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main Body8754Keyhole pull saw80㎜0.9㎜1.1㎜ 1.9㎜4903524 3106781,900yen
Replacement BladeR875Replacement Blade for
Keyhole pull saw		4903524 410675950yen

Keyhole push saw

Cutter saw with Keyhole pull saw!

Adopts a cutter type that is easy to carry and a thick blade type that is easy to turn. Drilling is possible at the tip. Keyhole saw that can be cut by pushing.

Use

Electrical construction work, Interior construction, Plumbing

Materials

Gypsum board, Keikal board, Plywood

Characteristics of the main body

For more details, click the icon.

  • Keyhole push saw
    • It is a compact and portable cutter-type keyhole push saw. Curve cutting can be performed smoothly by adopting a thick blade.
  • Thick blade cutter saw
    • The board thickness is 0.9mm, Uses a strong blade that is strong and easy to turn. Only the X series body can be installed.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Push stroke cuting
    • The blade is cut when pressed.
  • Drillable with tip blade
    • The tip has an arrow shape, so you can start cutting after drilling a hole.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of X Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main Body8854Keyhole push saw80㎜0.9㎜1.1㎜ 1.9㎜4903524 3106851,900yen
Replacement BladeR885Replacement Blade for
Keyhole push saw		4903524 410682950yen

Little Jack saw Promotion Video


How to Make a Jack-o'-Lantern

①Cut open the top or bottom of the pumpkin.
②Scrape and remove all seeds and pulp out.
③Draw a face on the pumpkin.
④Cut out each part of the face along the line with the Little Jack Saw.
⑤Place a LED light or a candle inside.

X series Little Jack saw

Little Jack saw

For making a Jack O’ Lantern!

Makes clean and smooth cuts without tearing pumpkin skin.
It comes with a thick Atsuba blade which makes it easy to rotate and drill. Easy to drill a hole with a blade tip. It cuts on the pull stroke.

Use

For making a Jack O’ Lantern.

Materials

Pumpkins for Halloween

Characteristics of the main body

For more details, click the icon.

  • Keyhole push saw
    • It is a compact and portable cutter-type keyhole push saw. Curve cutting can be performed smoothly by adopting a thick blade.
  • Thick blade cutter saw
    • The board thickness is 0.9mm, Uses a strong blade that is strong and easy to turn. Only the X series body can be installed.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Push stroke cuting
    • The blade is cut when pressed.
  • Drillable with tip blade
    • The tip has an arrow shape, so you can start cutting after drilling a hole.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of X Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main Body8855Little Jack saw80㎜0.9㎜1.1㎜ 1.9㎜4903524 3144092,000yen
Replacement BladeR885Replacement Blade for
Keyhole push saw		4903524 410682950yen

List of X series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body8754Keyhole pull saw80㎜0.9㎜1.1㎜1.9㎜4903524 3106781,900yen
Replacement BladeR875Replacement Blade for
Keyhole pull saw		4903524 410675950yen
Main Body8854Keyhole push saw80㎜0.9㎜1.1㎜1.9㎜4903524 3106851,900yen
Main Body8855Little Jack saw4903524 3144092,000yen
Replacement BladeR885Replacement Blade for
Keyhole push saw		4903524 410682950yen
*Replacement blades listed above are compatible.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.