Japanese pull saw

Saturday, December 07, 2024 JST     

Top Page > Product info > Details > T series

Double edge saw Promotion Video


Line up

BLUE HARD 210, BLUE HARD 240
BLUE HARD 270, BLUE HARD KOMAME 240

Double edge saw in a traditional shape. They have rip teeth on one side and crosscut teeth on the other.
We make edges on rip teeth too, which gives you very good cutting edge.

T series

BLUE HARD 210

Double edge saw for more productive performance.

Our traditional double edge saw. Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Thin width
    • The blade width is smaller than our other saws. Double edge saws with thinner width are more rigid and give you better cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body649BLUE HARD 210210㎜0.45㎜0.72㎜
0.72㎜
1.5㎜
3.7-2.5㎜
4903524 0649155,180yen
Replacement BladeS-649Replacement Blade for
BLUE HARD 210
4903524 2649192,500yen

BLUE HARD 210 TPE

Double edge saw for more productive performance.

Our traditional double edge saw. Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), MDF Panel, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Thin width
    • The blade width is smaller than our other saws. Double edge saws with thinner width are more rigid and give you better cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body665BLUE HARD 210 TPE210㎜0.45㎜0.72㎜
0.72㎜
1.5㎜
3.7-2.5㎜
4903524 3101974,330yen
Replacement BladeS-649Replacement Blade for
BLUE HARD 210
4903524 2649192,500yen

BLUE HARD 240

Crosscut teeth and rip teeth with superior cutting edge.

Our traditional double edge saw. Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Thin width
    • The blade width is smaller than our other saws. Double edge saws with thinner width are more rigid and give you better cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body650BLUE HARD 240240㎜0.5㎜0.83㎜
0.83㎜
1.7㎜
3.8-2.4㎜
4903524 0650115,300yen
Replacement BladeS-650Replacement Blade for
BLUE HARD 240
4903524 2650152,630yen

BLUE HARD 240 TPE

Crosscut teeth and rip teeth with superior cutting edge.

Our traditional double edge saw. Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), MDF Panel, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Thin width
    • The blade width is smaller than our other saws. Double edge saws with thinner width are more rigid and give you better cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body666BLUE HARD 240 TPE240㎜0.5㎜0.83㎜
0.83㎜
1.7㎜
3.8-2.4㎜
4903524 3102034,430yen
Replacement BladeS-650Replacement Blade for
BLUE HARD 240
4903524 2650152,630yen

BLUE HARD 240 KOMAME

Komame extra fine teeth for craft work.

Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make very clean cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Thin width
    • The blade width is smaller than our other saws. Double edge saws with thinner width are more rigid and give you better cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body651BLUE HARD 240 KOMAME240㎜0.45㎜0.73㎜
0.73㎜
1.3㎜
3.8-2.4㎜
4903524 0651105,550yen
Replacement BladeS-651Replacement Blade for
BLUE HARD 240 KOMAME
4903524 2651142,850yen

BLUE HARD 240 KOMAME TPE

Komame extra fine teeth for craft work.

Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make very clean cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), MDF Panel, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Thin width
    • The blade width is smaller than our other saws. Double edge saws with thinner width are more rigid and give you better cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body667BLUE HARD 240 KOMAME TPE240㎜0.45㎜0.73㎜
0.73㎜
1.3㎜
3.8-2.4㎜
4903524 3102104,650yen
Replacement BladeS-651Replacement Blade for
BLUE HARD 240 KOMAME
4903524 2651142,850yen

BLUE HARD 270

For wide variety of woodworking.

Our traditional double edge saw. Double edge saws have crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Thin width
    • The blade width is smaller than our other saws. Double edge saws with thinner width are more rigid and give you better cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body655BLUE HARD 270270㎜0.6㎜0.94㎜
0.94㎜
2.5㎜
5.6-3.8㎜
4903524 0655165,650yen
Replacement BladeS-655Replacement Blade for
BLUE HARD 270
4903524 2655102,850yen

BLUE HARD 270 TPE

For wide variety of woodworking.

Our traditional double edge saw. Double edge saws have crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), MDF Panel, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Thin width
    • The blade width is smaller than our other saws. Double edge saws with thinner width are more rigid and give you better cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body668BLUE HARD 270 TPE270㎜0.6㎜0.94㎜
0.94㎜
2.5㎜
5.6-3.8㎜
4903524 3102274,730yen
Replacement BladeS-655Replacement Blade for
BLUE HARD 270
4903524 2655102,850yen

SEIUN SAKU 210

Double edge saw for more productive performance.

Our traditional double edge saw. Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body605SEIUN SAKU 210210㎜0.45㎜0.72㎜
0.72㎜
1.5㎜
3.7-2.5㎜
4903524 060511open price
Replacement BladeS-605Replacement Blade for
SEIUN SAKU 210
4903524 260515open price

SEIUN SAKU 210 TPE

Double edge saw for more productive performance.

Our traditional double edge saw. Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, etc

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body660SEIUN SAKU 210 TPE210㎜0.45㎜0.72㎜
0.72㎜
1.5㎜
3.7-2.5㎜
4903524 310142open price
Replacement BladeS-605Replacement Blade for
SEIUN SAKU 210
4903524 260515open price

SEIUN SAKU 240

Crosscut teeth and rip teeth with superior cutting edge.

Our traditional double edge saw. Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body610SEIUN SAKU 240240㎜0.5㎜0.83㎜
0.83㎜
1.7㎜
3.8-2.4㎜
4903524 061013open price
Replacement BladeS-610Replacement Blade for
SEIUN SAKU 240
4903524 261017open price

SEIUN SAKU 240 TPE

Crosscut teeth and rip teeth with superior cutting edge.

Our traditional double edge saw. Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, etc

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body661SEIUN SAKU 240 TPE240㎜0.5㎜0.83㎜
0.83㎜
1.7㎜
3.8-2.4㎜
4903524 310159open price
Replacement BladeS-610Replacement Blade for
SEIUN SAKU 240
4903524 261017open price

SEIUN SAKU 240 KOMAME

Komame extra fine teeth for craft work.

Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make very clean cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body611SEIUN SAKU 240 KOMAME240㎜0.45㎜0.73㎜
0.73㎜
1.3㎜
3.8-2.4㎜
4903524 061112open price
Replacement BladeS-611Replacement Blade for
SEIUN SAKU 240 KOMAME
4903524 261116open price

SEIUN SAKU 240 KOMAME TPE

Komame extra fine teeth for craft work.

Double edge saw has crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make very clean cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, etc

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body662SEIUN SAKU 240 KOMAME TPE240㎜0.45㎜0.73㎜
0.73㎜
1.3㎜
3.8-2.4㎜
4903524 310166open price
Replacement BladeS-611Replacement Blade for
SEIUN SAKU 240 KOMAME
4903524 261116open price

SEIUN SAKU 270

For wide variety of woodworking.

Our traditional double edge saw. Double edge saws have crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body615SEIUN SAKU 270270㎜0.6㎜0.94㎜
0.94㎜
2.5㎜
5.6-3.8㎜
4903524 061518open price
Replacement BladeS-615Replacement Blade for
SEIUN SAKU 270
4903524 261512open price

SEIUN SAKU 270 TPE

For wide variety of woodworking.

Our traditional double edge saw. Double edge saws have crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, etc

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body663SEIUN SAKU 270 TPE270㎜0.6㎜0.94㎜
0.94㎜
2.5㎜
5.6-3.8㎜
4903524 310173open price
Replacement BladeS-615Replacement Blade for
SEIUN SAKU 270
4903524 261512open price

SEIUN SAKU 300

Made with both traditional technique and modern technique.

Our traditional double edge saw. Double edge saws have crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, and Composite Wood Panel

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body616SEIUN SAKU 300300㎜0.7㎜1.10㎜
1.10㎜
3.0㎜
5.6-3.5㎜
4903524 061617open price
Replacement BladeS-616Replacement Blade for
SEIUN SAKU 300
4903524 261611open price

SEIUN SAKU 300 TPE

Made with both traditional technique and modern technique.

Our traditional double edge saw. Double edge saws have crosscut teeth on one side and rip teeth on the other. With very thin blade and edges on rip teeth, you can make good quality cuts.

Use

For woodworking, wood craft, bamboo craft, furniture making, sculpturing, and musical instrument making.

Materials

Particle Board (OSB), Decking Material, General Timber, Bamboo Material, Laminated Wood, etc

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and crosscuts with a double edge woodworking saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body664SEIUN SAKU 300 TPE300㎜0.7㎜1.10㎜
1.10㎜
3.0㎜
5.6-3.5㎜
4903524 310180open price
Replacement BladeS-616Replacement Blade for
SEIUN SAKU 300
4903524 261611open price

List of T series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body649BLUE HARD 210210㎜0.45㎜0.72㎜
0.72㎜
1.5㎜
3.7-2.5㎜
4903524 0649155,180yen
Main Body665BLUE HARD 210 TPE4903524 3101974,330yen
Replacement BladeS-649Replacement Blade for
BLUE HARD 210
4903524 2649192,500yen
Main Body650BLUE HARD 240240㎜0.5㎜0.83㎜
0.83㎜
1.7㎜
3.8-2.4㎜
4903524 0650115,300yen
Main Body666BLUE HARD 240 TPE4903524 3102034,430yen
Replacement BladeS-650Replacement Blade for
BLUE HARD 240
4903524 2650152,630yen
Main Body651BLUE HARD 240 KOMAME240㎜0.45㎜0.73㎜
0.73㎜
1.3㎜
3.8-2.4㎜
4903524 0651105,550yen
Main Body667BLUE HARD 240 KOMAME TPE4903524 3102104,650yen
Replacement BladeS-651Replacement Blade for
BLUE HARD 240 KOMAME
4903524 2651142,850yen
Main Body655BLUE HARD 270270㎜0.6㎜0.94㎜
0.94㎜
2.5㎜
5.6-3.8㎜
4903524 0655165,650yen
Main Body668BLUE HARD 270 TPE4903524 3102274,730yen
Replacement BladeS-655Replacement Blade for
BLUE HARD 270
4903524 2655102,850yen
Main Body605SEIUN SAKU 210210㎜0.45㎜0.72㎜
0.72㎜
1.5㎜
3.7-2.5㎜
4903524 060511open price
Main Body660SEIUN SAKU 210 TPE4903524 310142open price
Replacement BladeS-605Replacement Blade for
SEIUN SAKU 210
4903524 260515open price
Main Body610SEIUN SAKU 240240㎜0.5㎜0.83㎜
0.83㎜
1.7㎜
3.8-2.4㎜
4903524 061013open price
Main Body661SEIUN SAKU 240 TPE4903524 310159open price
Replacement BladeS-610Replacement Blade for
SEIUN SAKU 240
4903524 261017open price
Main Body611SEIUN SAKU 240 KOMAME240㎜0.45㎜0.73㎜
0.73㎜
1.3㎜
3.8-2.4㎜
4903524 061112open price
Main Body662SEIUN SAKU 240 KOMAME TPE4903524 310166open price
Replacement BladeS-611Replacement Blade for
SEIUN SAKU 240 KOMAME
4903524 261116open price
Main Body615SEIUN SAKU 270270㎜0.6㎜0.94㎜
0.94㎜
2.5㎜
5.6-3.8㎜
4903524 061518open price
Main Body663SEIUN SAKU 270 TPE4903524 310173open price
Replacement BladeS-615Replacement Blade for
SEIUN SAKU 270
4903524 261512open price
Main Body616SEIUN SAKU 300300㎜0.7㎜1.10㎜
1.10㎜
3.0㎜
5.6-3.5㎜
4903524 061617open price
Main Body664SEIUN SAKU 300 TPE4903524 310180open price
Replacement BladeS-616Replacement Blade for
SEIUN SAKU 300
4903524 261611open price
*Cutting width and teeth pitch written on the first row is that of crosscut teeth and the one on the second row is that of rip teeth.
*Items listed above have compatible blades.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.