Japanese pull saw

Sunday, February 25, 2024 JST     

Top Page > Product info > Details > S series

S series SELECT

SELECT series characteristics

For more details, click the image below.

There are two types of handle for S series. There are six different types of blades.
There are three sizes of blade length and there are eighteen items in total.

In addition to the saw itself, grip and sheath only are also available.

Grip

The body is made out of aluminum die casing. We use elastomer resin on the grip.
We designed a grip that's light and fits comfortably in your hand.

AL-S Grip

Grip is small so it doesn't get in your way while you work with it. The grip is specially designed so that people with smaller hand and less grip power can also use it.

AL-M Grip

We recommend AL-M grip for people who would like to make powerful cuts.

Changing a blade

By moving the knurled screw, embedded lock pin moves up and down and locks the blade onto the handle.
You can see the lock pin on the handle just under the screw.

Picture on the top shows the handle with the blade locked onto the handle. Please make sure to see if the lock is completely inside the handle and not visible before you start using the saw.

Picture on the bottom shows the handle with the lock open. Lock pin is visible under the screw. You can replace a blade when the lock pin is out of the handle like this.

Strap hole on the handle.

There is a small hole for you to put the strap. Putting a strap string on the handle prevents dropping the saw from high places.

Automatic Lock Case

By just putting the saw in the sheath, saw is locked.
This prevents the saw from falling out of the sheath.

Just like in the picture, you can easily take the blade out by pushing the yellow stopper with your index finger and pulling the blade out.

There are two ways in which you can carry the saw with you.

There is a belt hole and a hook on the sheath for you to put it on a belt. You can easily put it on and carry the saw around with you.

Saw dust hole

The tip of the sheath is open.
This way it prevents saw dust from building up inside the sheath.
Dust comes out from the sheath just by putting the saw back in the case.

RAZORSAW SELECT 200 Green Wood

Smooth cut to start, and powerful cut as you start cutting with full strokes.

Great for landscaping. With crosscut teeth and increasing teeth pitch, you can cut aggressively. Great for pruning fruit trees and green wood. You can put the saw with a sheath on your belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body154RAZORSAW SELECT 200 Green Wood200㎜0.8㎜1.12㎜ 3.5-2.6㎜4903524 0154124,200yen
Replacement BladeS-154Replacement Blade for
RAZORSAW SELECT 200 Green Wood
4903524 2154161,930yen

RAZORSAW SELECT 250 Green Wood

For landscaping and making frames.

Great for landscaping. With crosscut teeth and increasing teeth pitch, you can cut aggressively. Great for pruning fruit trees and green wood. You can put the saw with a sheath on your belt.

Use

For pruning green wood, landscaping, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body164RAZORSAW SELECT 250 Green Wood250㎜0.8㎜1.12㎜ 3.6-2.7㎜4903524 0164194,830yen
Replacement BladeS-164Replacement Blade for
RAZORSAW SELECT 250 Green Wood
4903524 2164132,250yen

RAZORSAW SELECT 300 Green Wood

For landscaping and making frames.

Great for landscaping. With crosscut teeth and increasing teeth pitch, you can cut aggressively. Great for pruning fruit trees and green wood. You can put the saw with a sheath on your belt.

Use

For pruning green wood, landscapin,; pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body174RAZORSAW SELECT 300 Green Wood300㎜0.85㎜1.17㎜ 3.9-3.1㎜4903524 0174165,380yen
Replacement BladeS-174Replacement Blade for
RAZORSAW SELECT 300 Green Wood
4903524 2174102,700yen

RAZORSAW SELECT 200 Bamboo felling

Small grip fits in your hand!

They have special teeth for cutting bamboos. Great for felling in the forest. You can carry the saw with a sheath by putting it on the belt.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo material, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body152RAZORSAW SELECT 200 Bamboo felling200㎜0.7㎜1.0㎜ 1.5㎜4903524 0152144,200yen
Replacement BladeS-152Replacement Blade for
RAZORSAW SELECT 200 Bamboo felling
4903524 2152181,930yen

RAZORSAW SELECT 250 Bamboo felling

Standard handle.

Bamboo saws have special teeth for cutting bamboos. You can carry the saw with a sheath by putting it on your belt.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo material, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body162RAZORSAW SELECT 250 Bamboo felling250㎜0.7㎜1.0㎜ 1.7㎜4903524 0162114,830yen
Replacement BladeS-162Replacement Blade for
RAZORSAW SELECT 250 Bamboo felling
4903524 2162152,250yen

RAZORSAW SELECT 300 Bamboo felling

Bamboo saw with a longer blade.

Bamboo saws have special teeth for cutting bamboos. You can carry the saw with a sheath by putting it on your belt.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo material, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body172RAZORSAW SELECT 300 Bamboo felling300㎜0.8㎜1.12㎜ 1.9㎜4903524 0172185,380yen
Replacement BladeS-172Replacement Blade for
RAZORSAW SELECT 300 Bamboo felling
4903524 2172122,700yen

RAZORSAW SELECT 200 Timberman's

Small grip that fits perfectly in your hand!

You can work efficiently when making frames.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, General timber, Particle board (OSB), Laminated wood; Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body153RAZORSAW SELECT 200 Timberman's200㎜0.7㎜1.05㎜ 2.2㎜4903524 0153134,200yen
Replacement BladeS-153Replacement Blade for
RAZORSAW SELECT 200 Timberman's
4903524 2153171,930yen

RAZORSAW SELECT 250 Timberman's

Standard grip

You can work efficiently when making frames.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, General timber, Particle board (OSB), Laminated wood, Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body163RAZORSAW SELECT 250 Timberman's250㎜0.7㎜1.05㎜ 2.5㎜4903524 0163144,830yen
Replacement BladeS-163Replacement Blade for
RAZORSAW SELECT 250 Timberman's
4903524 2163142,250yen

RAZORSAW SELECT 300 Timberman's

You can put different types of blade on different types of handles.

You can work efficiently when making frames.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, General timber, Particle board (OSB), Laminated wood, Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body173RAZORSAW SELECT 300 Timberman's300㎜0.8㎜1.13㎜ 3.0㎜4903524 0173175,380yen
Replacement BladeS-173Replacement Blade for
RAZORSAW SELECT 300 Timberman's
4903524 2173112,700yen

RAZORSAW SELECT 200 Pruning

Small grip!

Tapered Sentei pruning blade has bigger teeth, but cutting surface is clean. By making clean cuts, you can grow trees in good quality.

Use

For forestry work, landscaping, and pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body155RAZORSAW SELECT 200 Pruning200㎜1.1㎜1.15㎜ 3.0㎜4903524 0155114,580yen
Replacement BladeS-155Replacement Blade for
RAZORSAW SELECT 200 Pruning
4903524 2155152,300yen

RAZORSAW SELECT 250 Pruning

For forestry work and pruning.

Tapered Sentei pruning blade has bigger teeth, but cutting surface is clean. By making clean cuts, you can grow trees in good quality.

Use

For forestry work, landscaping, and pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body165RAZORSAW SELECT 250 Pruning250㎜1.1㎜1.15㎜ 4.0㎜4903524 0165185,250yen
Replacement BladeS-165Replacement Blade for
RAZORSAW SELECT 250 Pruning
4903524 2165122,630yen

RAZORSAW SELECT 300 Pruning

Ideal for pruning!

Tapered Sentei pruning blade has bigger teeth, but cutting surface is very clean. By making clean cuts, you can grow trees in good quality.

Use

For forestry work, landscaping, and pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body175RAZORSAW SELECT 300 Pruning300㎜1.1㎜1.15㎜ 4.0㎜4903524 0175155,880yen
Replacement BladeS-175Replacement Blade for
RAZORSAW SELECT 300 Pruning
4903524 2175193,080yen

RAZORSAW SELECT 200 Fruit Tree (AL-S)

You can choose from two types of grips.

Our fruit saws are designed so that the branches won't shake as much. It gives you nice and smooth cut for pruning. It comes with an AL-S small grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body156RAZORSAW SELECT 200 Fruit Tree (AL-S)200㎜0.7㎜1.0㎜ 2.2㎜4903524 0156104,200yen
Replacement BladeS-156Replacement Blade for
RAZORSAW SELECT 200 Fruit Tree
4903524 2156141,930yen

RAZORSAW SELECT 200 Fruit Tree (AL-M)

You can choose from two types of grips.

Our fruit saws are designed so that the branches won't shake as much. It gives you nice and smooth cut for pruning. It comes with an AL-S small grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body156MRAZORSAW SELECT 200 Fruit Tree (AL-M)200㎜0.7㎜1.0㎜ 2.2㎜4903524 4000654,380yen
Replacement BladeS-156Replacement Blade for
RAZORSAW SELECT 200 Fruit Tree
4903524 2156141,930yen

RAZORSAW SELECT 250 Fruit Tree

You can prune trees without shaking them too much.

Our fruit saws are designed so that the branches won't shake as much. It gives you nice and smooth cut for pruning. It comes with an AL-S small grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body166RAZORSAW SELECT 250 Fruit Tree250㎜0.7㎜1.0㎜ 2.5㎜4903524 0166174,830yen
Replacement BladeS-166Replacement Blade for
RAZORSAW SELECT 250 Fruit Tree
4903524 2166112,250yen

RAZORSAW SELECT 300 Fruit Tree

For pruning fruit trees!

Our fruit saws are designed so that the branches won't shake as much. It gives you nice and smooth cut for pruning. It comes with an AL-S small grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body176RAZORSAW SELECT 300 Fruit Tree300㎜0.8㎜1.12㎜ 2.5㎜4903524 0176145,380yen
Replacement BladeS-176Replacement Blade for
RAZORSAW SELECT 300 Fruit Tree
4903524 2176182,700yen

RAZORSAW SELECT 200 Plastic

Special teeth for cutting plastic. It comes with a small grip.

Special teeth for cutting plastic. It's great for cutting plastic that does not contain wood grains.

Use

For PVC piping work and cutting plastic.

Materials

PVC pipe, Formica laminate, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip teeth with special edges for cutting plastic.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for plastic
    • Our plastic saws have rip teeth with some characteristics of crosscut teeth for cutting plastic that have no fiber.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body151RAZORSAW SELECT 200 Plastic200㎜0.7㎜1.0㎜ 1.5㎜4903524 0151154,200yen
Replacement BladeS-151Replacement Blade for
RAZORSAW SELECT 200 Plastic
4903524 2151191,930yen

RAZORSAW SELECT 250 Plastic

Special teeth for cutting plastic.

They have special teeth for cutting plastic. It's great for cutting plastic that does not contain wood grains.

Use

For PVC piping work and cutting plastic.

Materials

PVC pipe, Formica laminate, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip teeth with special edges for cutting plastic.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for plastic
    • Our plastic saws have rip teeth with some characteristics of crosscut teeth for cutting plastic that have no fiber.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body161RAZORSAW SELECT 250 Plastic250㎜0.7㎜1.0㎜ 1.5㎜4903524 0161124,830yen
Replacement BladeS-161Replacement Blade for
RAZORSAW SELECT 250 Plastic
4903524 2161162,250yen

RAZORSAW SELECT GRIP AL-S

You can choose your favorite handle and a sheath.

AL-S is small, and it fits perfectly in your hand. AL-M is bigger, and you can grip it well.

Plastic, Bamboo, Timberman's, Green Wood, Pruning, and Fruit Tree

There are 6 types of blades.

There are 3 different sizes.

200mm, 250m, 300mm

Product Specifications

ClassificationArt. No.NameBlade LengthJAN CodePrice
Parts9150RAZORSAW SELECT GRIP AL-S-4903524 0915081,600yen
Parts9160RAZORSAW SELECT GRIP AL-M-4903524 0916072,000yen
Parts9151RAZORSAW SELECT CASE 200200㎜4903524 091515860yen
Parts9161RAZORSAW SELECT CASE 250250㎜4903524 0916141,040yen
Parts9171RAZORSAW SELECT CASE 300300㎜4903524 0917131,300yen

S series EG

EG-25P PVC Pipe

Lightweight, nimble, the cut is beautiful!

Specializes in cutting PVC pipes. They come with a simple plastic case. Specially designed teeth prevents making burr.

Use

For PVC piping work.

Materials

PVC pipe

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip teeth with special edges for cutting plastic.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • EG GRIP
    • It's as light as 59g, and prevents putting stress on the wrist. You don't need any tool for replacing a blade.
  • Simple sheath
    • The price is more economical for saws without sheath. Our simple blade case can protect the blade.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for PVC pipes
    • Our plastic saws specializes in cutting PVC pipes. It prevents making burr.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body121EG-25P PVC Pipe250㎜0.5㎜0.8㎜ 1.5㎜4903524 4000722,380yen
Replacement BladeS-121Replacement Blade for
EG-25P PVC Pipe
4903524 4000891,400yen

EG-25SB Bamboo felling

EG Grip

Bamboo saw with special teeth for cutting bamboo. They are great for felling bamboo in the forest. Since it comes with a EG grip, they're more economical.

Use

For bamboo felling, cutting bamboo materials, and wood crafts.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • EG GRIP
    • It's as light as 59g, and prevents putting stress on the wrist. You don't need any tool for replacing a blade.
  • Simple sheath
    • The price is more economical for saws without sheath. Our simple blade case can protect the blade.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body138EG-25SB Bamboo felling250㎜0.7㎜1.0㎜ 1.7㎜4903524 4001402,700yen
Replacement BladeS-162Replacement Blade for
RAZORSAW SELECT 250 Bamboo felling
4903524 2162152,250yen

EG-25SG Green Wood

No sheath, more economical.

Great for landscaping. The decreasing teeth pitch allows you to make more powerful cuts. They are ideal for pruning in the forest and fruit farms, and for forestry work.

Use

For landscaping, forestry work, pruning fruit trees and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • EG GRIP
    • It's as light as 59g, and prevents putting stress on the wrist. You don't need any tool for replacing a blade.
  • Simple sheath
    • The price is more economical for saws without sheath. Our simple blade case can protect the blade.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body140EG-25SG Green Wood250㎜0.8㎜1.12㎜ 3.6-2.7㎜4903524 4001642,700yen
Replacement BladeS-164Replacement Blade for
RAZORSAW SELECT 250 Green Wood
4903524 2164132,250yen

EG-25SF Fruit Tree

They don't come with a sheath.
You can prune branches without shaking them too much.

Pruning saw for fruit farms. They are designed to make smooth cuts so that the branches will not shake as much while you work with it.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • EG GRIP
    • It's as light as 59g, and prevents putting stress on the wrist. You don't need any tool for replacing a blade.
  • Simple sheath
    • The price is more economical for saws without sheath. Our simple blade case can protect the blade.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body142EG-25SF Fruit Tree250㎜0.7㎜1.0㎜ 2.5㎜4903524 4001882,700yen
Replacement BladeS-166Replacement Blade for
RAZORSAW SELECT 250 Fruit Tree
4903524 2166112,250yen

S series MEGUMI

MEGUMI USUBA 210 Folding Saw

Folding saw with a blade that's 210mm long.
Pruning saw for fruit trees.

Our fruit tree saws are designed to prevent shaking branches too much. They specialize in cutting fruit trees. You can work efficiently with great cutting edge.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1090MEGUMI USUBA 210 Folding Saw210㎜0.6㎜0.9㎜ 2.2㎜4903524 0109055,080yen
Replacement BladeS-1060Replacement Blade for
MEGUMI USUBA 210
4903524 2106021,730yen

MEGUMI USUBA 240 with a sheath

240mm long blade with a wooden sheath.
Thin pruning saw for fruit trees.

Our fruit tree saws are designed to prevent shaking branches too much. You can work efficiently with smooth cutting edge. Comes with AL-M grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1061MEGUMI USUBA 240 with a sheath240㎜0.6㎜0.9㎜ 2.5㎜4903524 0106155,180yen
Replacement BladeS-1061Replacement Blade for
MEGUMI USUBA 240
4903524 2106192,030yen

MEGUMI USUBA 270 with a sheath

270mm blade with a wooden sheath.
Thin pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Comes with AL-M grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1062MEGUMI USUBA 270 with a sheath270㎜0.6㎜0.9㎜ 2.5㎜4903524 0106225,330yen
Replacement BladeS-1062Replacement Blade for
MEGUMI USUBA 270
4903524 2106262,100yen

MEGUMI USUBA 300 with a sheath

300mm blade with a wooden sheath.
Thin pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Comes with AL-M grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1063MEGUMI USUBA 300 with a sheath300㎜0.6㎜0.9㎜ 2.5㎜4903524 0106395,480yen
Replacement BladeS-1063Replacement Blade for
MEGUMI USUBA 300
4903524 2106332,200yen

MEGUMI USUBA 330 with a sheath

300mm blade with a wooden sheath.
Thin pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Comes with AL-M grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1064MEGUMI USUBA 330 with a sheath330㎜0.6㎜0.9㎜ 2.5㎜4903524 0106465,630yen
Replacement BladeS-1064Replacement Blade for
MEGUMI USUBA 330
4903524 2106402,300yen

MEGUMI USUBA 330 Folding Saw

Folding saw with 330mm long blade.
Thin pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Folding saw with a wooden grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1094MEGUMI USUBA 330 Folding Saw330㎜0.6㎜0.9㎜ 2.5㎜4903524 0109436,130yen
Replacement BladeS-1064Replacement Blade for
MEGUMI USUBA 330
4903524 2106402,300yen

MEGUMI ATSUBA 330 with a sheath

330mm blade with a wooden sheath.
Atsuba pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Folding saw with a wooden grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1074MEGUMI ATSUBA 330 with a sheath330㎜0.7㎜1.0㎜ 3.0㎜4903524 0107455,630yen
Replacement BladeS-1074Replacement Blade for
MEGUMI ATSUBA 330
4903524 2107492,300yen

MEGUMI ATSUBA 330 Folding Saw

Folding saw with 330mm long blade.
Atsuba pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Folding saw with a wooden grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1104MEGUMI ATSUBA 330 Folding Saw330㎜0.7㎜1.0㎜ 3.0㎜4903524 0110496,130yen
Replacement BladeS-1074Replacement Blade for
MEGUMI ATSUBA 330 Folding Saw
4903524 2107492,300yen

MEGUMI ATSUBA 360 Long Handle

Folding saw with 360mm long blade.
Atsuba pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Folding saw with a wooden grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Pole saw
    • Saw blade is attached on the tip of the pole handle. They are for pruning branches on tall trees.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1135MEGUMI ATSUBA 360 Long Handle360㎜0.8㎜1.1㎜ 2.5㎜4903524 01135310,500yen
Replacement BladeS-1075Replacement Blade for
MEGUMI ATSUBA 360
4903524 2107562,600yen

MEGUMI Metal Parts Set

Metal parts for MEGUMI folding saws and pole saws.

A set of metal parts for MEGUMI folding saws and pole saws.

You can use them to make your original handle.

You can put MEGUMI series Replacement Blade as well as all the blades from S series.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Parts1149MEGUMI Metal Parts Set--- -4903524 4001261,120yen

List of S series SELECT specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body154RAZORSAW SELECT 200 Green Wood200㎜0.8㎜1.12㎜3.5-2.6㎜4903524 0154124,200yen
Replacement BladeS-154Replacement Blade for
RAZORSAW SELECT 200 Green Wood
4903524 2154161,930yen
Main Body164RAZORSAW SELECT 250 Green Wood250㎜0.8㎜1.12㎜3.6-2.7㎜4903524 0164194,830yen
Replacement BladeS-164Replacement Blade for
RAZORSAW SELECT 250 Green Wood
4903524 2164132,250yen
Main Body174RAZORSAW SELECT 300 Green Wood300㎜0.85㎜1.17㎜3.9-3.1㎜4903524 0174165,380yen
Replacement BladeS-174Replacement Blade for
RAZORSAW SELECT 300 Green Wood
4903524 2174102,700yen
Main Body152RAZORSAW SELECT 200 Bamboo felling200㎜0.7㎜1.0㎜1.5㎜4903524 0152144,200yen
Replacement BladeS-152Replacement Blade for
RAZORSAW SELECT 200 Bamboo felling
4903524 2152181,930yen
Main Body162RAZORSAW SELECT 250 Bamboo felling250㎜0.7㎜1.0㎜1.7㎜4903524 0162114,830yen
Replacement BladeS-162Replacement Blade for
RAZORSAW SELECT 250 Bamboo felling
4903524 2162152,250yen
Main Body172RAZORSAW SELECT 300 Bamboo felling300㎜0.8㎜1.12㎜1.9㎜4903524 0172185,380yen
Replacement BladeS-172Replacement Blade for
RAZORSAW SELECT 300 Bamboo felling
4903524 2172122,700yen
Main Body153RAZORSAW SELECT 200 Timberman's200㎜0.7㎜1.05㎜2.2㎜4903524 0153134,200yen
Replacement BladeS-153Replacement Blade for
RAZORSAW SELECT 200 Timberman's
4903524 2153171,930yen
Main Body163RAZORSAW SELECT 250 Timberman's250㎜0.7㎜1.05㎜2.5㎜4903524 0163144,830yen
Replacement BladeS-163Replacement Blade for
RAZORSAW SELECT 250 Timberman's
4903524 2163142,250yen
Main Body173RAZORSAW SELECT 300 Timberman's300㎜0.8㎜1.13㎜3.0㎜4903524 0173175,380yen
Replacement BladeS-173Replacement Blade for
RAZORSAW SELECT 300 Timberman's
4903524 2173112,700yen
Main Body155RAZORSAW SELECT 200 Pruning200㎜1.1㎜1.15㎜3.0㎜4903524 0155114,580yen
Replacement BladeS-155Replacement Blade for
RAZORSAW SELECT 200 Pruning
4903524 2155152,300yen
Main Body165RAZORSAW SELECT 250 Pruning250㎜1.1㎜1.15㎜4.0㎜4903524 0165185,250yen
Replacement BladeS-165Replacement Blade for
RAZORSAW SELECT 250 Pruning
4903524 2165122,630yen
Main Body175RAZORSAW SELECT 300 Pruning300㎜1.1㎜1.15㎜4.0㎜4903524 0175155,880yen
Replacement BladeS-175Replacement Blade for
RAZORSAW SELECT 300 Pruning
4903524 2175193,080yen
Main Body156RAZORSAW SELECT 200 Fruit Tree (AL-S)200㎜0.7㎜1.0㎜2.2㎜4903524 0156104,200yen
Replacement Blade156MRAZORSAW SELECT 200 Fruit Tree (AL-M)4903524 4000654,380yen
Replacement BladeS-156Replacement Blade for
RAZORSAW SELECT 200 Fruit Tree
4903524 2156141,930yen
Main Body166RAZORSAW SELECT 250 Fruit Tree250㎜0.7㎜1.0㎜2.5㎜4903524 0166174,830yen
Replacement BladeS-166Replacement Blade for
RAZORSAW SELECT 250 Fruit Tree
4903524 2166112,250yen
Main Body176RAZORSAW SELECT 300 Fruit Tree300㎜0.8㎜1.12㎜2.5㎜4903524 0176145,380yen
Replacement BladeS-176Replacement Blade for
RAZORSAW SELECT 300 Fruit Tree
4903524 2176182,700yen
Main Body151RAZORSAW SELECT 200 Plastic200㎜0.7㎜1.0㎜1.5㎜4903524 0151154,200yen
Replacement BladeS-151Replacement Blade for
RAZORSAW SELECT 200 Plastic
4903524 2151191,930yen
Main Body161RAZORSAW SELECT 250 Plastic250㎜0.7㎜1.0㎜1.5㎜4903524 0161124,830yen
Replacement BladeS-161Replacement Blade for
RAZORSAW SELECT 250 Plastic
4903524 2161162,250yen
Parts9150RAZORSAW SELECT GRIP AL-S----4903524 0915081,600yen
Parts9160RAZORSAW SELECT GRIP AL-M----4903524 0916072,000yen
Parts9151RAZORSAW SELECT CASE 200200㎜---4903524 091515860yen
Parts9161RAZORSAW SELECT CASE 250250㎜---4903524 0916141,040yen
Parts9171RAZORSAW SELECT CASE 300300㎜---4903524 0917131,300yen
*S series, SELECT · EG · grace can share swords.
*The Homeone Recycle series and the blade can be shared.
*Click here for the details of Homeone Recycle series.

List of S series EG specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body121EG-25P PVC Pipe250㎜0.5㎜0.8㎜1.5㎜4903524 4000722,380yen
Replacement BladeS-121Replacement Blade for
EG-25P PVC Pipe
4903524 4000891,400yen
Main Body138EG-25SB Bamboo felling250㎜0.7㎜1.0㎜1.7㎜4903524 4001402,700yen
Replacement BladeS-162Replacement Blade for
RAZORSAW SELECT 250 Bamboo felling
4903524 2162152,250yen
Main Body140EG-25SG Green Wood250㎜0.8㎜1.12㎜3.6-2.7㎜4903524 4001642,700yen
Replacement BladeS-164Replacement Blade for
RAZORSAW SELECT 250 Green Wood
4903524 2164132,250yen
Main Body142EG-25SF Fruit Tree250㎜0.7㎜1.0㎜2.5㎜4903524 4001882,700yen
Replacement BladeS-166Replacement Blade for
RAZORSAW SELECT 250 Fruit Tree
4903524 2166112,250yen
*You can put SELECT blades on Megumi handle, and vice versa.
*The Homeone Recycle series and the blade can be shared.
*Click here for the details of Homeone Recycle series.

List of S series MEGUMI specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body1090MEGUMI USUBA 210 Folding Saw210㎜0.6㎜0.9㎜2.2㎜4903524 0109055,080yen
Replacement BladeS-1060Replacement Blade for
MEGUMI USUBA 210
4903524 2106021,730yen
Main Body1061MEGUMI USUBA 240 with a sheath240㎜0.6㎜0.9㎜2.5㎜4903524 0106155,180yen
Replacement BladeS-1061Replacement Blade for
MEGUMI USUBA 240
4903524 2106192,030yen
Main Body1062MEGUMI USUBA 270 with a sheath270㎜0.6㎜0.9㎜2.5㎜4903524 0106225,330yen
Replacement BladeS-1062Replacement Blade for
MEGUMI USUBA 270
4903524 2106262,100yen
Main Body1063MEGUMI USUBA 300 with a sheath300㎜0.6㎜0.9㎜2.5㎜4903524 0106395,480yen
Replacement BladeS-1063Replacement Blade for
MEGUMI USUBA 300
4903524 2106332,200yen
Main Body1064MEGUMI USUBA 330 with a sheath330㎜0.6㎜0.9㎜2.5㎜4903524 0106465,630yen
Main Body1094MEGUMI USUBA 330 Folding Saw4903524 0109436,130yen
Replacement BladeS-1064Replacement Blade for
MEGUMI USUBA 330
4903524 2106402,300yen
Main Body1074MEGUMI ATSUBA 330 with a sheath330㎜0.7㎜1.0㎜3.0㎜4903524 0107455,630yen
Main Body1104MEGUMI ATSUBA 330 Folding Saw4903524 0110496,130yen
Replacement BladeS-1074Replacement Blade for
MEGUMI ATSUBA 330 Folding Saw
4903524 2107492,300yen
Main Body1135MEGUMI ATSUBA 360 Long Handle360㎜0.8㎜1.1㎜2.5㎜4903524 01135310,500yen
Replacement BladeS-1075Replacement Blade for
MEGUMI ATSUBA 360
4903524 2107562,600yen
Main Body1149MEGUMI Metal Parts Set----4903524 4001261,120yen
*S series, SELECT · EG · grace can share swords.
*The Homeone Recycle series and the blade can be shared.
*Click here for the details of Homeone Recycle series.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.