Japanese pull saw

Friday, October 04, 2024 JST     

Top Page > Product info > Details > Q series

Q series

KOBIKI 270

They come with a wooden handle and a wooden sheath. The size of the teeth decreases as it gets closer to the handle.

They are ideal for pruning green wood in the forest. You can also use it to cut composite panels for making frames.

Use

For forestry work, landscaping, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of Q Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body719KOBIKI 270270㎜0.8㎜1.15㎜ 4.0-3.2㎜4903524 0719066,200yen
Replacement BladeS-719Replacement Blade for
KOBIKI 270 		4903524 2719002,550yen

KOBIKI 300

Wooden handle and wooden sheath

They come with a wooden handle and a wooden sheath. The size of the teeth decreases as it gets closer to the handle. You can use it to cut composite panels for making frames.

Use

For forestry work, landscaping, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of Q Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body720KOBIKI 300300㎜0.9㎜1.35㎜ 4.0-3.2㎜4903524 0720026,580yen
Replacement BladeS-720Replacement Blade for
KOBIKI 300		4903524 2720062,830yen

KOBIKI 330

They come with a wooden handle and a wooden sheath. The size of the teeth decreases as it gets closer to the handle.

They come with a wooden handle and a wooden sheath. The size of the teeth decreases as it gets closer to the handle. You can use it to cut composite panels for making frames.

Use

For forestry work, landscaping, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of Q Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body721KOBIKI 330330㎜1.0㎜1.45㎜ 4.5-3.5㎜4903524 0721016,930yen
Replacement BladeS-721Replacement Blade for
KOBIKI 330		4903524 2721053,200yen

List of Q series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body719KOBIKI 270270㎜0.8㎜1.15㎜4.0-3.2㎜4903524 0719066,200yen
Replacement BladeS-719Replacement Blade for
KOBIKI 270 		4903524 2719002,550yen
Main Body720KOBIKI 300300㎜0.9㎜1.35㎜4.0-3.2㎜4903524 0720026,580yen
Replacement BladeS-720Replacement Blade for
KOBIKI 300		4903524 2720062,830yen
Main Body721KOBIKI 330330㎜1.0㎜1.45㎜4.5-3.5㎜4903524 0721016,930yen
Replacement BladeS-721Replacement Blade for
KOBIKI 330		4903524 2721053,200yen
Items listed above have compatible blades.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.