Japanese pull saw

Friday, October 04, 2024 JST     

Top Page > Product info > Details > F series

RAZORSAW Folding Saw Lineup

RAZORSAW ORIKOMI 200
All Purpose

Can be used to cut different materials.

There are two steps adjustment of opening angles. If you are looking for a general hand saw for cutting all sorts of materials, such as general timber, green wood, and plastic, this is the one to choose. When it's folded, you can safely store it in your tool box without damaging the blade.

Use

For timberman's, landscaping, woodworking, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body810RAZORSAW ORIKOMI 200
All Purpose		200㎜0.7㎜1.05㎜ 2.2㎜4903524 0810113,180yen
Replacement BladeS-810Replacement Blade for
RAZORSAW ORIKOMI 200
All Purpose		4903524 2810151,800yen

RAZORSAW ORIKOMI 250
All Purpose

If you are not sure which saw to choose, choose all purpose folding saw!

The handle can be adjusted to two different angles. This is the saw for people who want to cut different kinds of materials such as general timber, green wood, and plastic. When it's folded, you can safely store it in your tool box.

Use

For timberman's, landscaping, woodworking, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body812RAZORSAW ORIKOMI 250
All Purpose		250㎜0.8㎜1.13㎜ 2.5㎜4903524 0812193,750yen
Replacement BladeS-812Replacement Blade for
RAZORSAW ORIKOMI 250
All Purpose		4903524 2812132,000yen

RAZORSAW ORIKOMI 200
Extra-Fine Teeth

Best cutting quality and clean cutting surface!

The handle can be adjusted to two different angles. Extra-fine teeth are suited for cutting bamboo and for craft work. Can be used to prune bamboo in the forest.

Use

For bamboo felling, woodworking, wood crafts and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body814RAZORSAW ORIKOMI 200
Extra-Fine Teeth		200㎜0.7㎜1.0㎜ 1.5㎜4903524 0814173,180yen
Replacement BladeS-814Replacement Blade for
RAZORSAW ORIKOMI 200
Extra-Fine Teeth		4903524 2814111,800yen

RAZORSAW ORIKOMI 250
Extra-Fine Teeth

Good for wood crafts too!

The handle can be adjusted to two different angles. Extra-fine teeth are suited for cutting bamboo and for craft work. Can be used to prune bamboo in the forest.

Use

For bamboo felling, woodworking, wood crafts and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body815RAZORSAW ORIKOMI 250
Extra-Fine Teeth		250㎜0.8㎜1.1㎜ 1.7㎜4903524 0815163,750yen
Replacement BladeS-815Replacement Blade for
RAZORSAW ORIKOMI 250
Extra-Fine Teeth		4903524 2815102,000yen

RAZORSAW ORIKOMI 200
Large Teeth

Smooth and easy cut to start, and powerful cut as you start cutting with full strokes.

The handle can be adjusted to two different angles. Size of the tooth becomes smaller as it gets closer to the handle. It gives you powerful cut as you start cutting with full strokes. If you would like to keep the saw in your tool box, we recommend a folding saw.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General wood, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body811RAZORSAW ORIKOMI 200
Large Teeth		200㎜0.8㎜1.12㎜ 3.5-2.6㎜4903524 0811103,180yen
Replacement BladeS-811Replacement Blade for
RAZORSAW ORIKOMI 200
Large Teeth		4903524 2811141,800yen

RAZORSAW ORIKOMI 250
Large Teeth

For landscaping and frame working!

The handle can be adjusted to two different angles. The size of the tooth is biggest on the tip of the blade, and it gradually becomes smaller towards the handle. Such structure gives you a powerful cut.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General wood, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body813RAZORSAW ORIKOMI 250
Large Teeth		250㎜0.85㎜1.17㎜ 3.6-2.7㎜4903524 0813183,750yen
Replacement BladeS-813Replacement Blade for
RAZORSAW ORIKOMI 250
Large Teeth		4903524 2813122,000yen

FD series Lineup

RAZORSAW FD-20A All Purpose

Can be used for different purposes!

By putting some rip teeth in between crosscut teeth, you can make clean cuts across the grain, parallel to the grain, and diagonally to the grain. It gives you smooth cut with clean cutting surface.

Use

For timberman's, landscaping, woodworking, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body840RAZORSAW FD-20A All Purpose200㎜0.7㎜1.05㎜ 2.2㎜4903524 0840123,830yen
Replacement BladeS-840Replacement Blade for
RAZORSAW FD-20A All Purpose		4903524 2840161,800yen

RAZORSAW FD-20B Bamboo

For smooth cuts and clean cutting surface!

They have special teeth for cutting bamboos. You can make clean cuts.

Use

For bamboo felling, woodworking, wood crafts, and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and woodworking. Folding saws are for pruning bamboos.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body842RAZORSAW FD-20B Bamboo200㎜0.7㎜1.0㎜ 1.5㎜4903524 0842103,830yen
Replacement BladeS-842Replacement Blade for
RAZORSAW FD-20B Bamboo		4903524 2842141,800yen

RAZORSAW FD-20T Timberman's

Tapered blade with some rip teeth.

You can cut along, across, and diagonally to the grain, so it's suited for cutting materials with complicated fiber pattern.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body845RAZORSAW FD-20T Timberman's200㎜1.1㎜1.15㎜ 3.0㎜4903524 0845174,080yen
Replacement BladeS-845Replacement Blade for
RAZORSAW FD-20T TimberTimberman's		4903524 2845112,050yen

RAZORSAW FD-20J Plastic

Special teeth for cutting plastic!

Tough teeth cut PVC pipes and hard materials smooth and clean.

Use

For PVC piping work, and cutting plastic.

Materials

PVC pipe, Acrylic resin, and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip teeth with special edges for cutting plastic.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for plastic
    • Our plastic saws have rip teeth with some characteristics of crosscut teeth for cutting plastic that have no fiber.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body843RAZORSAW FD-20J Plastic200㎜0.6㎜0.9㎜ 1.5㎜4903524 0843193,830yen
Replacement BladeS-843Replacement Blade for
RAZORSAW FD-20J Plastic		4903524 2843131,800yen

RAZORSAW FD-20G Green Wood

The opening angle of the saw can be adjusted by two types.

Smooth cutting to start with, and powerful cut as you start cutting with full strokes.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General wood, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body841RAZORSAW FD-20G Green Wood200㎜0.8㎜1.12㎜ 3.5-2.6㎜4903524 0841113,830yen
Replacement BladeS-841Replacement Blade for
RAZORSAW FD-20G Green Wood		4903524 2841151,800yen

RAZORSAW FD-20F Fruit Tree

The opening angle of the saw can be adjusted by two types.

Medium size teeth do not shake the branches as much as large teeth. This makes clean cuts and prevent damaging the trees.

Use

For pruning fruit trees and general green wood.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of F Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body844RAZORSAW FD-20F Fruit Tree200㎜0.7㎜1.0㎜ 2.2㎜4903524 0844183,830yen
Replacement BladeS-844Replacement Blade for
RAZORSAW FD-20F Fruit Tree		4903524 2844121,800yen

List of F series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body810RAZORSAW ORIKOMI 200
All Purpose		200㎜0.7㎜1.05㎜2.2㎜4903524 0810113,180yen
Replacement BladeS-810Replacement Blade for
RAZORSAW ORIKOMI 200
All Purpose		4903524 2810151,800yen
Main Body812RAZORSAW ORIKOMI 250
All Purpose		250㎜0.8㎜1.13㎜2.5㎜4903524 0812193,750yen
Replacement BladeS-812Replacement Blade for
RAZORSAW ORIKOMI 250
All Purpose		4903524 2812132,000yen
Main Body814RAZORSAW ORIKOMI 200
Extra-Fine Teeth		200㎜0.7㎜1.0㎜1.5㎜4903524 0814173,180yen
Replacement BladeS-814Replacement Blade for
RAZORSAW ORIKOMI 200
Extra-Fine Teeth		4903524 2814111,800yen
Main Body815RAZORSAW ORIKOMI 250
Extra-Fine Teeth		250㎜0.8㎜1.1㎜1.7㎜4903524 0815163,750yen
Replacement BladeS-815Replacement Blade for
RAZORSAW ORIKOMI 250
Extra-Fine Teeth		4903524 2815102,000yen
Main Body811RAZORSAW ORIKOMI 200
Large Teeth		200㎜0.8㎜1.12㎜3.5-2.6㎜4903524 0811103,180yen
Replacement BladeS-811Replacement Blade for
RAZORSAW ORIKOMI 200
Large Teeth		4903524 2811141,800yen
Main Body813RAZORSAW ORIKOMI 250
Large Teeth		250㎜0.85㎜1.17㎜3.6-2.7㎜4903524 0813183,750yen
Replacement BladeS-813Replacement Blade for
RAZORSAW ORIKOMI 250
Large Teeth		4903524 2813122,000yen
Main Body840RAZORSAW FD-20A All Purpose200㎜0.7㎜1.05㎜2.2㎜4903524 0840123,830yen
Replacement BladeS-840Replacement Blade for
RAZORSAW FD-20A All Purpose		4903524 2840161,800yen
Main Body842RAZORSAW FD-20B Bamboo200㎜0.7㎜1.0㎜1.5㎜4903524 0842103,830yen
Replacement BladeS-842Replacement Blade for
RAZORSAW FD-20B Bamboo		4903524 2842141,800yen
Main Body845RAZORSAW FD-20T Timberman's200㎜1.1㎜1.15㎜3.0㎜4903524 0845174,080yen
Replacement BladeS-845Replacement Blade for
RAZORSAW FD-20T TimberTimberman's		4903524 2845112,050yen
Main Body843RAZORSAW FD-20J Plastic200㎜0.6㎜0.9㎜1.5㎜4903524 0843193,830yen
Replacement BladeS-843Replacement Blade for
RAZORSAW FD-20J Plastic		4903524 2843131,800yen
Main Body841RAZORSAW FD-20G Green Wood200㎜0.8㎜1.12㎜3.5-2.6㎜4903524 0841113,830yen
Replacement BladeS-841Replacement Blade for
RAZORSAW FD-20G Green Wood		4903524 2841151,800yen
Main Body844RAZORSAW FD-20F Fruit Tree200㎜0.7㎜1.0㎜2.2㎜4903524 0844183,830yen
Replacement BladeS-844Replacement Blade for
RAZORSAW FD-20F Fruit Tree		4903524 2844121,800yen
*Although Replacement Blades listed above are compatible, longer teeth might not exactly fit in the handle when it's folded.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.