Japanese pull saw

Sunday, December 10, 2023 JST     

Top Page > Product info > Details > Trade only products

RAZORSAW 05

RAZORSAW 05

Traditional rattan handle with 0.5mm thick woodworking saw. The blade is thick and tough, and easy to handle.

Use

For woodworking, carpentry work, and furniture making.

Materials

Laminated Wood, General Timber, Composite Wood Panel, MDF Panel, Particle Board (OSB), and Plywood

Characteristics of the main body

For more details, click the icon.

  • Woodworking
    • Ideal for carpentry work and DIY. Woodworking saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body105RAZORSAW 05255㎜0.5㎜0.74㎜ 1.3㎜4903524 029716open price
Replacement BladeS-105Replacement Blade for
RAZORSAW 05		4903524 210510open price

Razor Gold

RAZORGOLD A

Great for craft work for making fine cuts!

0.3mm thin blade with a traditional rattan handle. They are great for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures, and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for woodworking. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of Razorgold Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body200RAZORGOLD A270㎜0.3㎜0.51㎜ 1.5㎜4903524 020003open price
Replacement BladeS-200Replacement Blade for
RAZORGOLD A		4903524 220007open price

RAZORGOLD ZA

Curved tip for craft work!

0.3mm thin blade with a traditional rattan handle. They are great for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures, and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for woodworking. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of Razorgold Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body202RAZORGOLD ZA270㎜0.3㎜0.51㎜ 1.5㎜4903524 020225open price
Replacement BladeS-202Replacement Blade for
RAZORGOLD ZA		4903524 220229open price

List of Razor Gold specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body200RAZORGOLD A270㎜0.3㎜0.51㎜1.5㎜4903524 020003open price
Replacement BladeS-200Replacement Blade for
RAZORGOLD A		4903524 220007open price
Main Body202RAZORGOLD ZA270㎜0.3㎜0.51㎜1.5㎜4903524 020225open price
Replacement BladeS-202Replacement Blade for
RAZORGOLD ZA		4903524 220229open price
*Products listed above have compatible blades.

SUPER KENRYU

SUPER KENRYU 240

For pruning in the forest.

Tapered blade with no sets on the teeth make cutting surface extra clean. Even with bigger teeth pitch, you can make clean cutting surface. By making extra clean cuts, you can grow trees in good quality.

Use

For forestry work, green wood, and landscaping

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body741WSUPER KENRYU 240270㎜1.1㎜1.15㎜ 4.0㎜4903524 0000000yen
Replacement BladeS-792Replacement Blade for
SUPER KENRYU 240

SUPER KENRYU 270

For felling in the forest.

With a tapered blade, you can make clean cut even with large teeth with big teeth pitch. Ideal for forestry work. By making extra clean cuts, you can make timbers in good quality.

Use

For forestry work, green wood, and landscaping

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body742WSUPER KENRYU 270270㎜1.1㎜1.15㎜ 4.0㎜4903524 374212open price
Replacement BladeS-793Replacement Blade for
SUPER KENRYU 270		4903524 279319open price

List of SUPER KENRYU specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body741WSUPER KENRYU 240270㎜1.1㎜1.15㎜4.0㎜4903524 0000000yen
Replacement BladeS-792Replacement Blade for
SUPER KENRYU 240
Main Body742WSUPER KENRYU 270270㎜1.1㎜1.15㎜4.0㎜4903524 374212open price
Replacement BladeS-793Replacement Blade for
SUPER KENRYU 270		4903524 279319open price
*Products listed above have compatible blades.

Fruit Saw

General pruning, small branches

A compact saw designed to smoothly cut small branches such as maples and rose bushes.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1180Fruit Saw150㎜0.8㎜1.15㎜ 2.5㎜4903524 400751open price
Replacement BladeS-1180Replacement Blade for
Fruit Saw		4903524 400768open price
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.