Japanese pull saw

Friday, June 14, 2024 JST     

Top Page > Product info > Details > L series

L series

L series features

For more details, click the image below.

Available in 15 types, three sizes, and for 5 different uses.

Anzen Kariwaku, Super Kenryu, and Takehiki Noko are discontinued.
The new models are our L series.
L Series Bamboo 240mm, 270mm, and 300mm.
L Series Kariwaku 240mm, 270mm, and 300mm.
L Series Kariwaku 240mm, 270mm, and 300mm.
L Series Green Wood 240mm, 270mm, 300mm.
L Series Pruning 240mm, 270mm, 300mm.
L Series Curved 270mm, 300mm, and 330mm.
There are 15 blades but one type of handle.

Power fitting grip

Handle fits perfectly in your hand. The handle is made out of elastomer resin which prevents slipping when you grip.

You can easily change a blade just by removing one screw.

We use a large screw with a nut which prevents screw from being lose.
It's easier to change a blade compared to the handle with two screws. You can just use a coin to remove a screw.

There is a small hole on the rear end of the handle.

You can put a strap string in the small hole.

You can put the saw in the sheath both from the left and right.

This way it doesn't matter which is your dominant hand.

Lock sheath system

The saw locks into the sheath for safety, while you can easily pull it out when you use it.

There are two ways to put the sheath on your belt.

You can carry the saw around with you by putting a belt in the hole or hooking it on your belt.

Saw dust hole

By opening the tip of the sheath, it prevents saw dust from building up inside the sheath.

How to replace a blade.

1. Use a coin to loosen a screw.
2. Pull the blade out from the handle.
3. Attach a new Replacement Blade in the handle.
4. Put the screw on and tighten it until the blade is firmly attached to the handle.

Caution

Wear gloves when changing the blade.
Never touch the serration on the blade.
Make sure that the blade is firmly attached to the handle before you start using the saw.
Check and make sure that the material you are about to cut does not have any metal parts such as nails.

Anzen Kariwaku, Super Kenryu, and Takehiki Noko are now available as L series.

The blades are compatible.

Old models and new models.

ANZENKARIWAKU - LT series

SUPER KENRYU - LH series

TAKEHIKI NOKO - LB series

RAZORSAW LB24-A Bamboo felling

For pruning bamboos.

They have special bamboo teeth, specialized in cutting bamboos. They are ideal for pruning in the bamboo forests. Since it comes with a sheath, you can carry it with you on a belt.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7143RAZORSAW LB24-A Bamboo felling240㎜0.7㎜0.95㎜ 1.7㎜4903524 4002013,930yen
Replacement BladeR714Replacement Blade for
RAZORSAW LB24 Bamboo felling
4903524 4003242,080yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LB27-A Bamboo felling

For taking care of bamboo forests.

Bamboo saws have special teeth for cutting bamboos. You can put it on your belt.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7153RAZORSAW LB27-A Bamboo felling270㎜0.7㎜0.95㎜ 1.7㎜4903524 4002184,150yen
Replacement BladeR715Replacement Blade for
RAZORSAW LB27 Bamboo felling
4903524 4003312,380yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LB30-A Bamboo felling

For volunteer work in bamboo forests!

They have special teeth for cutting bamboos. You can put it on your belt and keep the sheath with you while working.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7163RAZORSAW LB30-A Bamboo felling300㎜0.8㎜1.12㎜ 2.5㎜4903524 4002254,430yen
Replacement BladeR716Replacement Blade for
RAZORSAW LB30 Bamboo felling
4903524 4003482,700yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LT24-A Timberman's

Ideal saw for building frames.

For building frames. You can put it on your belt when you work.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7243RAZORSAW LT24-A Timberman's240㎜0.7㎜1.07㎜ 2.5㎜4903524 4002323,930yen
Replacement BladeR724Replacement Blade for
RAZORSAW LT24 Timberman's
4903524 4003552,080yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LT27-A Timberman's

Ideal saw for making frames.

For building frames. You can put it on your belt when you work.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7253RAZORSAW LT27-A Timberman's270㎜0.7㎜1.07㎜ 2.5㎜4903524 4002494,150yen
Replacement BladeR725Replacement Blade for
RAZORSAW LT27 Timberman's
4903524 4003622,380yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LT30-A Timberman's

Ideal Timberman's saw!

For building frames. You can put it on your belt while working.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7263RAZORSAW LT30-A Timberman's300㎜0.8㎜1.13㎜ 3.0㎜4903524 4002564,430yen
Replacement BladeR726Replacement Blade for
RAZORSAW LT30 Timberman's
4903524 4003792,700yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LG24-A Green Wood

Easy and smooth cut to start with, and powerful cut as you start cutting with full strokes.

It's best for landscaping. For felling and pruning in the forest and fruit farms. L series come with a belt which you can put it on your belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7343RAZORSAW LG24-A Green Wood240㎜0.8㎜1.12㎜ 3.6-2.7㎜4903524 4002633,930yen
Replacement BladeR734Replacement Blade for
RAZORSAW LG24 Green Wood
4903524 4003862,080yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LG27-A Green Wood

Smooth cut to start with, and you can make powerful cuts as you start cutting with full strokes.

Ideal for landscaping. For felling and pruning in the forest and fruit farms. L series come with a belt which you can put it on your belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7353RAZORSAW LG27-A Green Wood270㎜0.8㎜1.12㎜ 3.7-2.7㎜4903524 4002704,150yen
Replacement BladeR735Replacement Blade for
RAZORSAW LG27 Green Wood
4903524 4003932,380yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LG30-A Green Wood

Smooth cut to start with, and powerful cut as you start cutting with full strokes!

Ideal for landscaping. For felling and pruning in the forest and fruit farms. L series come with a belt which you can put it on your belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7363RAZORSAW LG30-A Green Wood300㎜0.85㎜1.17㎜ 3.9-3.1㎜4903524 4002874,430yen
Replacement BladeR736Replacement Blade for
RAZORSAW LG30 Green Wood
4903524 4004092,700yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LH24-A Pruning

For pruning in the forest.

Tapered blade with no sets on the teeth make cutting surface extra clean. Even with bigger teeth pitch, you can make clean cutting surface. By making extra clean cuts, you can grow trees in good quality.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7443RAZORSAW LH24-A Pruning240㎜1.1㎜1.15㎜ 4.0㎜4903524 4002944,250yen
Replacement BladeR744Replacement Blade for
RAZORSAW LH24 Pruning
4903524 4004162,450yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LH27-A Pruning

For felling in the forest.

With a tapered blade, you can make clean cut even with large teeth with big teeth pitch. Ideal for forestry work. By making extra clean cuts, you can make timbers in good quality.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7453RAZORSAW LH27-A Pruning270㎜1.1㎜1.15㎜ 4.0㎜4903524 4003004,480yen
Replacement BladeR745Replacement Blade for
RAZORSAW LH27 Pruning
4903524 4004232,750yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LH30-A Pruning

For felling in the forests.

With a tapered blade, you can make clean cut even with large teeth with big teeth pitch. Ideal for forestry work. By making extra clean cuts, you can make timbers in good quality.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7463RAZORSAW LH30-A Pruning300㎜1.1㎜1.15㎜ 4.0㎜4903524 4003174,700yen
Replacement BladeR746Replacement Blade for
RAZORSAW LH30 Pruning
4903524 4004303,080yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LC27-A Curved

Curved saws give you powerful cuts!

Curved pruning saws give you powerful cuts. They are best for felling. You can carry it with you on a belt.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Curved saws
    • Blade with tapered back and no sets. You can make powerful cuts with it. Like our pruning saw for green wood, they are ideal for forestry work.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved saw
    • Curved blade cuts branches more efficiently. For pruning branches, and not for woodworking.
  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7753RAZORSAW LC27-A Curved270㎜1.4㎜1.3㎜ 4.0㎜4903524 4006214,780yen
Replacement BladeR775Replacement Blade for
RAZORSAW LC27 Curved
4903524 4006522,980yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LC30-A Curved

Curved saws give you powerful cuts!

Curved pruning saws give you powerful cuts. They are best for felling. You can carry it with you on a belt.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Curved saws
    • Blade with tapered back and no sets. You can make powerful cuts with it. Like our pruning saw for green wood, they are ideal for forestry work.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved saw
    • Curved blade cuts branches more efficiently. For pruning branches, and not for woodworking.
  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7763RAZORSAW LC30-A Curved300㎜1.4㎜1.3㎜ 4.0㎜4903524 4006384,980yen
Replacement BladeR776Replacement Blade for
RAZORSAW LC30 Curved
4903524 4006693,230yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

RAZORSAW LC33-A Curved

Curved saws give you powerful cuts!

Curved pruning saws give you powerful cuts. They are best for felling. You can carry it with you on a belt.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Curved saws
    • Blade with tapered back and no sets. You can make powerful cuts with it. Like our pruning saw for green wood, they are ideal for forestry work.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved saw
    • Curved blade cuts branches more efficiently. For pruning branches, and not for woodworking.
  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body7773RAZORSAW LC33-A Curved330㎜1.4㎜1.3㎜ 4.0㎜4903524 4006455,230yen
Replacement BladeR777Replacement Blade for
RAZORSAW LC33 Curved
4903524 4006763,430yen
*are limited for the domestic market. Please click the link above for more details on the overseas models.

L series Pole Saw

SUPER KENRYU Pole Saw 1.9m

Our pole saws are light, and they are great for pruning branches that are high up in the air.

The blade on our pole saw has special teeth for pruning.
You can reach high places without using a ladder.

Use

For pruning fruit trees, pruning green wood and general green wood.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Pole saw
    • Saw blade is attached on the tip of the pole handle. They are for pruning branches on tall trees.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body783SUPER KENRYU Pole Saw 1.9m240㎜1.1㎜1.15㎜ 4.0㎜4903524 0783188,000yen
Replacement BladeS-783Replacement Blade for
SUPER KENRYU Pole Saw 1.9m
4903524 2783122,830yen

SUPER KENRYU Pole Saw 3.4m

Our pole saws are light, and they are great for pruning branches on high places.

The blade on our pole saw has special teeth for pruning.
You can reach high places without using a ladder.

Use

For pruning fruit trees, pruning green wood and general green wood.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Pole saw
    • Saw blade is attached on the tip of the pole handle. They are for pruning branches on tall trees.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body782SUPER KENRYU Pole Saw 3.4m300㎜1.1㎜1.37㎜ 4.0㎜4903524 07821910,250yen
Replacement BladeS-782Replacement Blade for
SUPER KENRYU Pole Saw 3.4m
4903524 2782133,300yen

List of L series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body7143RAZORSAW LB24-A Bamboo felling240㎜0.7㎜0.95㎜1.7㎜4903524 4002013,930yen
Replacement BladeR714Replacement Blade for
RAZORSAW LB24 Bamboo felling
4903524 4003242,080yen
Main Body7153RAZORSAW LB27-A Bamboo felling270㎜0.7㎜0.95㎜1.7㎜4903524 4002184,150yen
Replacement BladeR715Replacement Blade for
RAZORSAW LB27 Bamboo felling
4903524 4003312,380yen
Main Body7163RAZORSAW LB30-A Bamboo felling300㎜0.8㎜1.12㎜2.5㎜4903524 4002254,430yen
Replacement BladeR716Replacement Blade for
RAZORSAW LB30 Bamboo felling
4903524 4003482,700yen
Main Body7243RAZORSAW LT24-A Timberman's240㎜0.7㎜1.07㎜2.5㎜4903524 4002323,930yen
Replacement BladeR724Replacement Blade for
RAZORSAW LT24 Timberman's
4903524 4003552,080yen
Main Body7253RAZORSAW LT27-A Timberman's270㎜0.7㎜1.07㎜2.5㎜4903524 4002494,150yen
Replacement BladeR725Replacement Blade for
RAZORSAW LT27 Timberman's
4903524 4003622,380yen
Main Body7263RAZORSAW LT30-A Timberman's300㎜0.8㎜1.13㎜3.0㎜4903524 4002564,430yen
Replacement BladeR726Replacement Blade for
RAZORSAW LT30 Timberman's
4903524 4003792,700yen
Main Body7343RAZORSAW LG24-A Green Wood240㎜0.8㎜1.12㎜3.6-2.7㎜4903524 4002633,930yen
Replacement BladeR734Replacement Blade for
RAZORSAW LG24 Green Wood
4903524 4003862,080yen
Main Body7353RAZORSAW LG27-A Green Wood270㎜0.8㎜1.12㎜3.7-2.7㎜4903524 4002704,150yen
Replacement BladeR735Replacement Blade for
RAZORSAW LG27 Green Wood
4903524 4003932,380yen
Main Body7363RAZORSAW LG30-A Green Wood300㎜0.85㎜1.17㎜3.9-3.1㎜4903524 4002874,430yen
Replacement BladeR736Replacement Blade for
RAZORSAW LG30 Green Wood
4903524 4004092,700yen
Main Body7443RAZORSAW LH24-A Pruning240㎜1.1㎜1.15㎜4.0㎜4903524 4002944,250yen
Replacement BladeR744Replacement Blade for
RAZORSAW LH24 Pruning
4903524 4004162,450yen
Main Body7453RAZORSAW LH27-A Pruning270㎜1.1㎜1.15㎜4.0㎜4903524 4003004,480yen
Replacement BladeR745Replacement Blade for
RAZORSAW LH27 Pruning
4903524 4004232,750yen
Main Body7463RAZORSAW LH30-A Pruning300㎜1.1㎜1.15㎜4.0㎜4903524 4003174,700yen
Replacement BladeR746Replacement Blade for
RAZORSAW LH30 Pruning
4903524 4004303,080yen
Main Body7753RAZORSAW LC27-A Curved270㎜1.4㎜1.3㎜4.0㎜4903524 4006214,780yen
Replacement BladeR775Replacement Blade for
RAZORSAW LC27 Curved
4903524 4006522,980yen
Main Body7763RAZORSAW LC30-A Curved300㎜1.4㎜1.3㎜4.0㎜4903524 4006384,980yen
Replacement BladeR776Replacement Blade for
RAZORSAW LC30 Curved
4903524 4006693,230yen
Main Body7773RAZORSAW LC33-A Curved330㎜1.4㎜1.3㎜4.0㎜4903524 4006455,230yen
Replacement BladeR777Replacement Blade for
RAZORSAW LC33 Curved
4903524 4006763,430yen
Main Body783SUPER KENRYU Pole Saw 1.9m240㎜1.1㎜1.15㎜4.0㎜4903524 0783188,000yen
Replacement BladeS-783Replacement Blade for
SUPER KENRYU Pole Saw 1.9m
4903524 2783122,830yen
Main Body782SUPER KENRYU Pole Saw 3.4m300㎜1.1㎜1.37㎜4.0㎜4903524 07821910,250yen
Replacement BladeS-782Replacement Blade for
SUPER KENRYU Pole Saw 3.4m
4903524 2782133,300yen
*The blades are compatible. But depending on the shape and the length of the blade, the blade might not exactly fit in the sheath you have.
*L series are limited for the domestic market. Please click the link above for more details on the overseas models.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.