Japanese pull saw

Monday, July 22, 2024 JST     

Top Page > Product info > Details > B series

Dozuki Extra Fine Promotion Video


Lineup

Razorsaw Dozuki, Dozuki Wide Type, and Tatebiki Dozuki Style

Dozuki saws are great for finishing work for wood crafts and bamboo crafts. The very basic traditional Dozuki saw. The Wide Type can cut materials up to 6cm thick. Tatebiki Dozuki Style can make both rip cuts and crosscuts.

B series

RAZORSAW DOZUKI

For those of you who are looking for a hand saw for intricate work!

0.3mm thin blade with a traditional rattan handle. They have teeth pitch 1.0mm, and it's ideal for intricate work. The blade is firmly attached to the handle with a full back metal.

Use

For precision woodworking, bamboo crafts, carpentry work, making furnitures, and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both crosscuts and rip cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body370RAZORSAW DOZUKI240㎜0.3㎜0.46㎜ 1.0㎜4903524 0370017,180yen
Replacement BladeS-370Replacement Blade for
RAZORSAW DOZUKI
4903524 2370053,330yen

RAZORSAW DOZUKI TPE

DOZUKI ahead of the ideal!

TPE resin is used for the entire grip. A grip that does not slip no matter where you hold it. A design that uses traditional Japanese SEIGAIHAMON pattern, therefore you will never get tired during cutting. 0.3mm thin blade with a traditional rattan handle. They have teeth pitch 1.0mm, and it is ideal for intricate work. The blade is firmly attached to the handle with a full back metal.

Use

For precision woodworking, bamboo crafts, carpentry work, making furnitures, and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both crosscuts and rip cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body373RAZORSAW DOZUKI TPE240㎜0.3㎜0.46㎜ 1.0㎜4903524 3103196,100yen
Replacement BladeS-370Replacement Blade for
RAZORSAW DOZUKI
4903524 2370053,330yen

RAZORSAW DOZUKI WIDE TYPE

You can cut materials up to 6cm thick!

Our Dozuki Wide Type has a blade that's 10mm wider than our regular Dozuki. You can cut materials up to 6cm thick. The blade is 0.3mm thick, and it comes with a traditional rattan wrapped handle. They have teeth pitch as small as 1.0mm. Ideal for intricate work.

Use

For precision woodworking, bamboo crafts, carpentry work, making furnitures, and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both crosscuts and rip cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Wide type
    • Long metal spine on Dozuki saws comes in the way when you try to cut material thicker than the blade width. Can cut up to 6cm thick.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body371RAZORSAW DOZUKI WIDE TYPE240㎜0.3㎜0.46㎜ 1.0㎜4903524 0371007,300yen
Replacement BladeS-371Replacement Blade for
RAZORSAW DOZUKI WIDE TYPE
4903524 2371043,450yen

RAZORSAW DOZUKI WIDE TYPE TPE

The width increases the width of woodworking!

TPE resin is used for the entire grip. A grip that does not slip no matter where you hold it. A design that uses SEIGAIHAMON, so it will prevent you to getting tired when you work with. Our Dozuki Wide Type has a blade that's 10mm wider than our regular Dozuki. You can cut materials up to 6cm thick. The blade is 0.3mm thick, and it comes with a traditional rattan wrapped handle. They have teeth pitch as small as 1.0mm. Ideal for intricate work.

Use

For precision woodworking, bamboo crafts, carpentry work, making furnitures, and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both crosscuts and rip cuts.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Wide type
    • Long metal spine on Dozuki saws comes in the way when you try to cut material thicker than the blade width. Can cut up to 6cm thick.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body374RAZORSAW DOZUKI WIDE TYPE TPE240㎜0.3㎜0.46㎜ 1.0㎜4903524 3103266,230yen
Replacement BladeS-371Replacement Blade for
RAZORSAW DOZUKI WIDE TYPE
4903524 2371043,450yen

RAZORSAW DOZUKI TATEBIKI DOZUKI STYLE

For making tenons and for cutting hard wood!

Rip teeth are good for both rip cutting and cross cutting, and for making tenons. Rip teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For precision woodworking, making furnitures, carpentry work, scalpturing, musical instruments, and bamboo crafts.

Materials

General timber, Deking material, Ply wood, Laminated wood, Ebony, Rose wood, Formica Laminate, MDF panel, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Rip cut
    • They are for both cross cutting and rip cutting. It's ideal for cutting harder wood such as decking materials.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip teeth
    • By making rip cut edges on crosscut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body372RAZORSAW DOZUKI TATEBIKI DOZUKI STYLE240㎜0.3㎜0.51㎜ 1.3㎜4903524 4000967,180yen
Replacement BladeS-372Replacement Blade for
RAZORSAW TATEBIKI DOZUKI STYLE
4903524 4001023,330yen

RAZORSAW DOZUKI TATEBIKI DOZUKI STYLE TPE

Rip cut Crosscut hard wood resin, this one!

TPE resin is used for the entire grip. A grip that does not slip no matter where you hold it. A design that uses SEIGAIHAMON and never gets tired. Rip teeth are good for both rip cutting and cross cutting, and for making tenons. Rip teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For precision woodworking, making furnitures, carpentry work, scalpturing, musical instruments, and bamboo crafts.

Materials

General timber, Deking material, Ply wood, Laminated wood, Ebony, Rose wood, Formica Laminate, MDF panel, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Rip cut
    • They are for both cross cutting and rip cutting. It's ideal for cutting harder wood such as decking materials.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • TPE GRIP
    • The entire handle is coated with elastomer resin, and it gives you good grip.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip teeth
    • By making rip cut edges on crosscut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body375RAZORSAW DOZUKI TATEBIKI DOZUKI STYLE TPE240㎜0.3㎜0.51㎜ 1.3㎜4903524 3103336,100yen
Replacement BladeS-372Replacement Blade for
RAZORSAW TATEBIKI DOZUKI STYLE
4903524 4001023,330yen

List of B series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body370RAZORSAW DOZUKI240㎜0.3㎜0.46㎜1.0㎜4903524 0370017,180yen
Main Body373RAZORSAW DOZUKI TPE4903524 3103196,100yen
Replacement BladeS-370Replacement Blade for
RAZORSAW DOZUKI
4903524 2370053,330yen
Main Body371RAZORSAW DOZUKI WIDE TYPE240㎜0.3㎜0.46㎜1.0㎜4903524 0371007,300yen
Main Body374RAZORSAW DOZUKI WIDE TYPE TPE4903524 3103266,230yen
Replacement BladeS-371Replacement Blade for
RAZORSAW DOZUKI WIDE TYPE
4903524 2371043,450yen
Main Body372RAZORSAW DOZUKI TATEBIKI DOZUKI STYLE240㎜0.3㎜0.51㎜1.3㎜4903524 4000967,180yen
Main Body375RAZORSAW DOZUKI TATEBIKI DOZUKI STYLE TPE4903524 3103336,100yen
Replacement BladeS-372Replacement Blade for
RAZORSAW TATEBIKI DOZUKI STYLE
4903524 4001023,330yen
*Replacement blades listed above are compatible.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.