Japanese pull saw

Saturday, December 07, 2024 JST     

Top Page > Product info > Details > H series

Promotion Video of Bamboo saw with a straight handle


Line up

TAKEHIKI NOKO 240, TAKEHIKI NOKO 240 TPEGRIP, TAKEHIKI NOKO 330 EVAGRIP

Special teeth for cutting bamboo. The standard 240mm and 330mm for cutting moso bamboo. For bamboo craft and pruning bamboos.

H series Takehiki Noko

TAKEHIKI NOKO 330 EVAGRIP

You can cut moso bamboos too!

EVAGRIP made out of elastomer resin. 330mm blade is suited for cutting large moso bamboos.

Use

For bamboo crafts, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body424TAKEHIKI NOKO 330 EVAGRIP330㎜0.8㎜1.12㎜ 2.5㎜4903524 0424184,780yen
Replacement BladeS-424Replacement Blade for
TAKEHIKI NOKO 330 EVAGRIP
4903524 2424122,750yen

Promotion Video of Timberman's saw with a straight handle


Lineup

RAZORSAW KARIWAKU 300 EVAGRIP, RAZORSAW KARIWAKU 330 EVAGRIP

Kariwaku saw with a straight handle. Available in 300mm and 330mm. The handle is long, so you can you both hands when cutting wood. By doing so, you can cut faster with less stress.

H series Kariwaku

RAZORSAW KARIWAKU 300 EVAGRIP

For cutting lumber as well as wood logs.

Kariwaku saw with a straight handle. You can use both hand when working with it, so you can work more effectively.

Use

For timberman's and cutting general timber

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body501RAZORSAW KARIWAKU 300 EVAGRIP300㎜0.8㎜1.13㎜ 3.0㎜4903524 0501164,630yen
Replacement BladeS-501Replacement Blade for
RAZORSAW KARIWAKU 300 EVAGRIP
4903524 2501102,600yen

RAZORSAW KARIWAKU 330 EVAGRIP

You can easily cut wood logs too!

Kariwaku saw with a straight handle. You can use both hands when working with it, so you can cut more efficiently.

Use

For timberman's and cutting general timber

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body507RAZORSAW KARIWAKU 330 EVAGRIP330㎜0.8㎜1.13㎜ 3.0㎜4903524 0507104,780yen
Replacement BladeS-507Replacement Blade for
RAZORSAW KARIWAKU 330 EVAGRIP
4903524 2507142,750yen

List of H Series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main Body424TAKEHIKI NOKO 330 EVAGRIP330㎜0.8㎜1.12㎜2.5㎜4903524 0424184,780yen
Replacement BladeS-424Replacement Blade for
TAKEHIKI NOKO 330 EVAGRIP
4903524 2424122,750yen
Main Body501RAZORSAW KARIWAKU 300 EVAGRIP300㎜0.8㎜1.13㎜3.0㎜4903524 0501164,630yen
Replacement BladeS-501Replacement Blade for
RAZORSAW KARIWAKU 300 EVAGRIP
4903524 2501102,600yen
Main Body507RAZORSAW KARIWAKU 330 EVAGRIP330㎜0.8㎜1.13㎜3.0㎜4903524 0507104,780yen
Replacement BladeS-507Replacement Blade for
RAZORSAW KARIWAKU 330 EVAGRIP
4903524 2507142,750yen
The items listed above have compatible blades.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.