Japanese pull saw

Top Page > Product info > Details > S series

S series SELECT

SELECT series characteristics

For more details, click the image below.

There are two types of handle for S series. There are six different types of blades.
There are three sizes of blade length and there are eighteen items in total.

In addition to the saw itself, grip and sheath only are also available.

Grip

The body is made out of aluminum die casing. We use elastomer resin on the grip.
We designed a grip that's light and fits comfortably in your hand.

AL-S Grip

Grip is small so it doesn't get in your way while you work with it. The grip is specially designed so that people with smaller hand and less grip power can also use it.

AL-M Grip

We recommend AL-M grip for people who would like to make powerful cuts.

Changing a blade

By moving the knurled screw, embedded lock pin moves up and down and locks the blade onto the handle.
You can see the lock pin on the handle just under the screw.

Picture on the top shows the handle with the blade locked onto the handle. Please make sure to see if the lock is completely inside the handle and not visible before you start using the saw.

Picture on the bottom shows the handle with the lock open. Lock pin is visible under the screw. You can replace a blade when the lock pin is out of the handle like this.

Strap hole on the handle.

There is a small hole for you to put the strap. Putting a strap string on the handle prevents dropping the saw from high places.

Automatic Lock Case

By just putting the saw in the sheath, saw is locked.
This prevents the saw from falling out of the sheath.

Just like in the picture, you can easily take the blade out by pushing the yellow stopper with your index finger and pulling the blade out.

There are two ways in which you can carry the saw with you.

There is a belt hole and a hook on the sheath for you to put it on a belt. You can easily put it on and carry the saw around with you.

Saw dust hole

The tip of the sheath is open.
This way it prevents saw dust from building up inside the sheath.
Dust comes out from the sheath just by putting the saw back in the case.

RAZORSAW SELECT 200 Green Wood

Smooth cut to start, and powerful cut as you start cutting with full strokes.

Great for landscaping. With cross cut teeth and increasing teeth pitch, you can cut aggressively. Great for pruning fruit trees and green wood. You can put the saw with a sheath on your belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body154RAZORSAW SELECT 200 Green Wood200mm0.8mm1.12mm 3.5mm-2.6mm49035240154123,330yen
Spare bladeS-154Spare blade for
RAZORSAW SELECT 200 Green Wood
49035242154161,550yen

RAZORSAW SELECT 250 Green Wood

For landscaping and making frames.

Great for landscaping. With cross cut teeth and increasing teeth pitch, you can cut aggressively. Great for pruning fruit trees and green wood. You can put the saw with a sheath on your belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body164RAZORSAW SELECT 250 Green Wood250mm0.8mm1.12mm 3.6mm-2.7mm49035240164193,700yen
Spare bladeS-164Spare blade for
RAZORSAW SELECT 250 Green Wood
49035242164131,780yen

RAZORSAW SELECT 300 Green Wood

For landscaping and making frames.

Great for landscaping. With cross cut teeth and increasing teeth pitch, you can cut aggressively. Great for pruning fruit trees and green wood. You can put the saw with a sheath on your belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's

Materials

Green wood, Laminated wood, General timbers, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body174RAZORSAW SELECT 300 Green Wood300mm0.85mm1.17mm 3.9mm-3.1mm49035240174164,130yen
Spare bladeS-174Spare blade for
RAZORSAW SELECT 300 Green Wood
49035242174101,980yen

RAZORSAW SELECT 200 Bamboo felling

Small grip fits in your hand!

They have special teeth for cutting bamboos. Great for felling in the forest. You can carry the saw with a sheath by putting it on the belt.

Use

For bamboo felling, cutting bamboo materials and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body152RAZORSAW SELECT 200 Bamboo felling200mm0.7mm1.00mm 1.5mm49035240152143,330yen
Spare bladeS-152Spare blade for
RAZORSAW SELECT 200 Bamboo felling
49035242152181,550yen

RAZORSAW SELECT 250 Bamboo felling

Standard handle.

Bamboo saws have special teeth for cutting bamboos. You can carry the saw with a sheath by putting it on your belt.

Use

For bamboo felling, cutting bamboo materials and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body162RAZORSAW SELECT 250 Bamboo felling250mm0.7mm1.00mm 1.7mm49035240162113,700yen
Spare bladeS-162Spare blade for
RAZORSAW SELECT 250 Bamboo felling
49035242162151,780yen

RAZORSAW SELECT 300 Bamboo felling

Bamboo saw with a longer blade.

Bamboo saws have special teeth for cutting bamboos. You can carry the saw with a sheath by putting it on your belt.

Use

For bamboo felling, cutting bamboo materials and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body172RAZORSAW SELECT 300 Bamboo felling300mm0.8mm1.12mm 1.9mm49035240172184,130yen
Spare bladeS-172Spare blade for
RAZORSAW SELECT 300 Bamboo felling
49035242172121,980yen

RAZORSAW SELECT 200 Timberman's

Small grip that fits perfectly in your hand!

You can work efficiently when making frames.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body153RAZORSAW SELECT 200 Timberman's200mm0.7mm1.05mm 2.2mm49035240153133,330yen
Spare bladeS-153Spare blade for
RAZORSAW SELECT 200 Timberman's
49035242153171,550yen

RAZORSAW SELECT 250 Timberman's

Standard grip

You can work efficiently when making frames.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle boards (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body163RAZORSAW SELECT 250 Timberman's250mm0.7mm1.05mm 2.5mm49035240163143,700yen
Spare bladeS-163Spare blade for
RAZORSAW SELECT 250 Timberman's
49035242163141,780yen

RAZORSAW SELECT 300 Timberman's

You can put different types of blade on different types of handles.

You can work efficiently when making frames.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body173RAZORSAW SELECT 300 Timberman's300mm0.8mm1.13mm 3.0mm49035240173174,130yen
Spare bladeS-173Spare blade for
RAZORSAW SELECT 300 Timberman's
49035242173111,980yen

RAZORSAW SELECT 200 Pruning

Small grip!

Tapered Sentei pruning blade has bigger teeth, but cutting surface is clean. By making clean cuts, you can grow trees in good quality.

Use

For forestry work, green wood, and landscaping.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • Tapered blade works just like sets. Our pruning saws with tapered back has no sets.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body155RAZORSAW SELECT 200 Pruning200mm1.1mm1.15mm 3.0mm49035240155113,700yen
Spare bladeS-155Spare blade for
RAZORSAW SELECT 200 Pruning
49035242155191,930yen

RAZORSAW SELECT 250 Pruning

For forestry work and pruning.

Tapered Sentei pruning blade has bigger teeth, but cutting surface is clean. By making clean cuts, you can grow trees in good quality.

Use

For forestry work, green wood, and landscaping.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • Tapered blade works just like sets. Our pruning saws with tapered back has no sets.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body165RAZORSAW SELECT 250 Pruning250mm1.1mm1.15mm 4.0mm49035240165184,130yen
Spare bladeS-165Spare blade for
RAZORSAW SELECT 250 Pruning
49035242165122,130yen

RAZORSAW SELECT 300 Pruning

Ideal for pruning!

Tapered Sentei pruning blade has bigger teeth, but cutting surface is very clean. By making clean cuts, you can grow trees in good quality.

Use

For forestry work, green wood, and landscaping.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • Tapered blade works just like sets. Our pruning saws with tapered back has no sets.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body175RAZORSAW SELECT 300 Pruning300mm1.1mm1.15mm 4.0mm49035240175154,640yen
Spare bladeS-175Spare blade for
RAZORSAW SELECT 300 Pruning
49035242175192,330yen

RAZORSAW SELECT 200 Fruit Tree

You can choose from two types of grips.

Our fruit saws are designed so that the branches won't shake as much. It gives you nice and smooth cut for pruning. It comes with an AL-S small grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body156RAZORSAW SELECT 200 Fruit Tree200mm0.7mm1.00mm 2.2mm49035240156103,330yen
Spare bladeS-156Spare blade for
RAZORSAW SELECT 200 Fruit Tree
49035242156141,560yen

RAZORSAW SELECT 200 Fruit Tree

You can choose from two types of grips.

Our fruit saws are designed so that the branches won't shake as much. It gives you nice and smooth cut for pruning. It comes with an AL-S small grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body156MRAZORSAW SELECT 200 Fruit Tree200mm0.7mm1.00mm 2.2mm49035244000653,500yen
Spare bladeS-156Spare blade for
RAZORSAW SELECT 200 Fruit Tree
49035242156141,550yen

RAZORSAW SELECT 250 Fruit Tree

You can prune trees without shaking them too much.

Our fruit saws are designed so that the branches won't shake as much. It gives you nice and smooth cut for pruning. It comes with an AL-S small grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body166RAZORSAW SELECT 250 Fruit Tree250mm0.7mm1.00mm 2.5mm49035240166173,700yen
Spare bladeS-166Spare blade for
RAZORSAW SELECT 250 Fruit Tree
49035242166111,780yen

RAZORSAW SELECT 300 Fruit Tree

For pruning fruit trees!

Our fruit saws are designed so that the branches won't shake as much. It gives you nice and smooth cut for pruning. It comes with an AL-S small grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body176RAZORSAW SELECT 300 Fruit Tree300mm0.8mm1.16mm 2.5mm49035240176144,130yen
Spare bladeS-176Spare blade for
RAZORSAW SELECT 300 Fruit Tree
49035242176181,980yen

RAZORSAW SELECT 200 Plastic

Special teeth for cutting plastic. It comes with a small grip.

Special teeth for cutting plastic. It's great for cutting plastic that does not contain wood grains.

Use

For PVC piping work and cutting plastic.

Materials

PVC pipe, Formica laminate, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip cut teeth with special edges for cutting plastic. The teeth on plastic saws are tough.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for plastic
    • Our plastic saws have rip cut teeth with some characteristics of cross cut teeth for cutting plastic that have no fiber.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body151RAZORSAW SELECT 200 Plastic200mm0.7mm1.00mm 1.5mm49035240151153,330yen
Spare bladeS-151Spare blade for
RAZORSAW SELECT 200 Plastic
49035242151191,550yen

RAZORSAW SELECT 250 Plastic

Special teeth for cutting plastic.

They have special teeth for cutting plastic. It's great for cutting plastic that does not contain wood grains.

Use

For PVC piping work and cutting plastic.

Materials

PVC pipe, Formica laminate, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip cut teeth with special edges for cutting plastic. The teeth on plastic saws are tough.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for plastic
    • Our plastic saws have rip cut teeth with some characteristics of cross cut teeth for cutting plastic that have no fiber.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body161RAZORSAW SELECT 250 Plastic250mm0.7mm1.00mm 1.5mm49035240161123,700yen
Spare bladeS-161Spare blade for
RAZORSAW SELECT 250 Plastic
49035242161161,780yen

Grip and Case

You can choose your favorite handle and a sheath.

AL-S is small, and it fits perfectly in your hand. AL-M is bigger, and you can grip it well.

Plastic, Bamboo, Timberman's, Green Wood, Pruning, and Fruit Tree

There are 6 types of blades.

There are 3 different sizes.

200mm, 250m, 300mm

Product Specifications

ClassificationArt. No.Product NameBlade LengthJAN CodePrice
Parts9150RAZORSAW SELECT GRIP AL-S49035240915081,380yen
Parts9160RAZORSAW SELECT GRIP AL-M49035240916071,530yen
Parts9151RAZORSAW SELECT CASE 200200mm4903524091515680yen
Parts9161RAZORSAW SELECT CASE 250250mm4903524091614780yen
Parts9171RAZORSAW SELECT CASE 300300mm4903524091713980yen

S series EG

EG-25P PVC Pipe

Special teeth for cutting PVC pipes.

Specializes in cutting PVC pipes. They come with a simple plastic case. Specially designed teeth prevents making burr.

Use

For PVC piping work.

Materials

PVC pipe

Characteristics of the main body

For more details, click the icon.

  • PVC pipe
    • PVC pipe saws have a blade that's 0.5mm thick. They have good cutting quality and prevent making burr.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EG GRIP
    • It's as light as 59g, and prevents putting stress on the wrist. You don't need any tool for replacing a blade.
  • Simple sheath
    • The price is more economical for saws without sheath. Our simple blade case can protect the blade.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for PVC pipes
    • Our plastic saws specializes in cutting PVC pipes. It prevents making burr.
  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body121EG-25P PVC Pipe250mm0.5mm0.80mm 1.5mm49035244000721,880yen
Spare bladeS-121Spare blade for
EG-25P PVC Pipe
49035244000891,400yen

EG-25SB Bamboo felling

EG Grip

Bamboo saw with special teeth for cutting bamboo. They are great for felling bamboo in the forest. Since it comes with a EG grip, they're more economical.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EG GRIP
    • It's as light as 59g, and prevents putting stress on the wrist. You don't need any tool for replacing a blade.
  • Simple sheath
    • The price is more economical for saws without sheath. Our simple blade case can protect the blade.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body138EG-25SB Bamboo felling250mm0.7mm1.00mm 1.7mm49035244001402,200yen
Spare bladeS-162Spare blade for
RAZORSAW SELECT 250 Bamboo felling
49035242162151,780yen

EG-25SG Green Wood

No sheath, more economical.

Great for landscaping. The decreasing teeth pitch allows you to make more powerful cuts. They are ideal for pruning in the forest and fruit farms, and for forestry work.

Use

For landscaping, forestry work, pruning fruit trees and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EG GRIP
    • It's as light as 59g, and prevents putting stress on the wrist. You don't need any tool for replacing a blade.
  • Simple sheath
    • The price is more economical for saws without sheath. Our simple blade case can protect the blade.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body140EG-25SG Green Wood250mm0.8mm1.12mm 3.6mm-2.7mm49035244001642,200yen
Spare bladeS-164Spare blade for
RAZORSAW SELECT 250 Green Wood
49035242164131,780yen

EG-25SF Fruit Tree

They don't come with a sheath.
You can prune branches without shaking them too much.

Pruning saw for fruit farms. They are designed to make smooth cuts so that the branches will not shake as much while you work with it.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EG GRIP
    • It's as light as 59g, and prevents putting stress on the wrist. You don't need any tool for replacing a blade.
  • Simple sheath
    • The price is more economical for saws without sheath. Our simple blade case can protect the blade.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body142EG-25SF Fruit Tree250mm0.7mm1.00mm 2.5mm49035244001882,200yen
Spare bladeS-166Spare blade for
RAZORSAW SELECT 250 Fruit Tree
49035242166111,780yen

S series MEGUMI

MEGUMI USUBA 210 Folding Saw

Folding saw with a blade that's 210mm long.
Pruning saw for fruit trees.

Our fruit tree saws are designed to prevent shaking branches too much. They specialize in cutting fruit trees. You can work efficiently with great cutting edge.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1090MEGUMI USUBA 210 Folding Saw210mm0.6mm0.90mm 2.2mm49035240109054,330yen
Spare bladeS-1060Spare blade for
MEGUMI USUBA 210
49035242106021,480yen

MEGUMI USUBA 240 with a sheath

240mm long blade with a wooden sheath.
Thin pruning saw for fruit trees.

Our fruit tree saws are designed to prevent shaking branches too much. You can work efficiently with smooth cutting edge. Comes with AL-M grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1061MEGUMI USUBA 240 with a sheath240mm0.6mm0.90mm 2.5mm49035240106154,050yen
Spare bladeS-1061Spare blade for
MEGUMI USUBA 240
49035242106191,530yen

MEGUMI USUBA 270 with a sheath

270mm blade with a wooden sheath.
Thin pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Comes with AL-M grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1062MEGUMI USUBA 270 with a sheath270mm0.6mm0.90mm 2.5mm49035240106224,200yen
Spare bladeS-1062Spare blade for
MEGUMI USUBA 270
49035242106261,600yen

MEGUMI USUBA 300 with a sheath

300mm blade with a wooden sheath.
Thin pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Comes with AL-M grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1063MEGUMI USUBA 300 with a sheath300mm0.6mm0.90mm 2.5mm49035240106394,350yen
Spare bladeS-1063Spare blade for
MEGUMI USUBA 300
49035242106331,700yen

MEGUMI USUBA 330 with a sheath

300mm blade with a wooden sheath.
Thin pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Comes with AL-M grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1064MEGUMI USUBA 330 with a sheath330mm0.6mm0.90mm 2.5mm49035240106464,500yen
Spare bladeS-1064Spare blade for
MEGUMI USUBA 330
49035242106401,800yen

MEGUMI USUBA 330 Folding Saw

Folding saw with 330mm long blade.
Thin pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Folding saw with a wooden grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1094MEGUMI USUBA 330 Folding Saw330mm0.6mm0.90mm 2.5mm49035240109435,250yen
Spare bladeS-1064Spare blade for
MEGUMI USUBA 330
49035242106401,800yen

MEGUMI ATSUBA 330 with a sheath

330mm blade with a wooden sheath.
Atsuba pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Folding saw with a wooden grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1074MEGUMI ATSUBA 330 with a sheath330mm0.7mm1.00mm 3.0mm49035240107454,500yen
Spare bladeS-1074Spare blade for
MEGUMI ATSUBA 330
49035242107491,800yen

MEGUMI ATSUBA 330 Folding Saw

Folding saw with 330mm long blade.
Atsuba pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Folding saw with a wooden grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1104MEGUMI ATSUBA 330 Folding Saw330mm0.7mm1.00mm 3.0mm49035240110495,250yen
Spare bladeS-1074Spare blade for
MEGUMI ATSUBA 330
49035242107491,800yen

MEGUMI ATSUBA 360 Long Handle

Folding saw with 360mm long blade.
Atsuba pruning saw for fruit trees.

They are designed to prevent shaking small branches. You can work efficiently with smooth cutting edge. Folding saw with a wooden grip.

Use

For pruning fruit trees.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Pole saw
    • Saw blade is attached on the tip of the pole handle. They are for pruning branches on tall trees.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1135MEGUMI ATSUBA 360 Long Handle360mm0.8mm1.10mm 2.5mm49035240113539,000yen
Spare bladeS-1075Spare blade for
MEGUMI ATSUBA 360
49035242107562,100yen

MEGUMI Metal Parts Set

Metal parts for MEGUMI folding saws and pole saws.

A set of metal parts for MEGUMI folding saws and pole saws.

You can use them to make your original handle.

You can put MEGUMI series spare blade as well as all the blades from S series.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body1149MEGUMI Metal Parts Set--- -49035244001261,200yen

List of S series SELECT specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body154RAZORSAW SELECT 200 Green Wood200mm0.8mm1.12mm3.5mm-2.6mm49035240154123,330yen
Spare bladeS-154Spare blade for
RAZORSAW SELECT 200 Green Wood
49035242154161,550yen
Main body164RAZORSAW SELECT 250 Green Wood250mm0.8mm1.12mm3.6mm-2.7mm49035240164193,700yen
Spare bladeS-164Spare blade for
RAZORSAW SELECT 250 Green Wood
49035242164131,780yen
Main body174RAZORSAW SELECT 300 Green Wood300mm0.85mm1.17mm3.9mm-3.1mm49035240174164,130yen
Spare bladeS-174Spare blade for
RAZORSAW SELECT 300 Green Wood
49035242174101,980yen
Main body152RAZORSAW SELECT 200 Bamboo felling200mm0.7mm1.00mm1.5mm49035240152143,330yen
Spare bladeS-152Spare blade for
RAZORSAW SELECT 200 Bamboo felling
49035242152181,550yen
Main body162RAZORSAW SELECT 250 Bamboo felling250mm0.7mm1.00mm1.7mm49035240162113,700yen
Spare bladeS-162Spare blade for
RAZORSAW SELECT 250 Bamboo felling
49035242162151,780yen
Main body172RAZORSAW SELECT 300 Bamboo felling300mm0.8mm1.12mm1.9mm49035240172184,130yen
Spare bladeS-172Spare blade for
RAZORSAW SELECT 300 Bamboo felling
49035242172121,980yen
Main body153RAZORSAW SELECT 200 Timberman's200mm0.7mm1.05mm2.2mm49035240153133,330yen
Spare bladeS-153Spare blade for
RAZORSAW SELECT 200 Timberman's
49035242153171,550yen
Main body163RAZORSAW SELECT 250 Timberman's250mm0.7mm1.05mm2.5mm49035240163143,700yen
Spare bladeS-163Spare blade for
RAZORSAW SELECT 250 Timberman's
49035242163141,780yen
Main body173RAZORSAW SELECT 300 Timberman's300mm0.8mm1.13mm3.0mm49035240173174,130yen
Spare bladeS-173Spare blade for
RAZORSAW SELECT 300 Timberman's
49035242173111,980yen
Main body155RAZORSAW SELECT 200 Pruning200mm1.1mm1.15mm3.0mm49035240155113,700yen
Spare bladeS-155Spare blade for
RAZORSAW SELECT 200 Pruning
49035242155191,930yen
Main body165RAZORSAW SELECT 250 Pruning250mm1.1mm1.15mm4.0mm49035240165184,130yen
Spare bladeS-165Spare blade for
RAZORSAW SELECT 250 Pruning
49035242165122,130yen
Main body175RAZORSAW SELECT 300 Pruning300mm1.1mm1.15mm4.0mm49035240175154,640yen
Spare bladeS-175Spare blade for
RAZORSAW SELECT 300 Pruning
49035242175192,330yen
Main body156RAZORSAW SELECT 200 Fruit Tree200mm0.7mm1.00mm2.2mm49035240156103,330yen
Main body156MRAZORSAW SELECT 200 Fruit Tree49035244000653,500yen
Spare bladeS-156Spare blade for
RAZORSAW SELECT 200 Fruit Tree
49035242156141,550yen
Main body166RAZORSAW SELECT 250 Fruit Tree250mm0.7mm1.00mm2.5mm49035240166173,700yen
Spare bladeS-166Spare blade for
RAZORSAW SELECT 250 Fruit Tree
49035242166111,780yen
Main body176RAZORSAW SELECT 300 Fruit Tree300mm0.8mm1.16mm2.5mm49035240176144,130yen
Spare bladeS-176Spare blade for
RAZORSAW SELECT 300 Fruit Tree
49035242176181,980yen
Main body151RAZORSAW SELECT 200 Plastic200mm0.7mm1.00mm1.5mm49035240151153,330yen
Spare bladeS-151Spare blade for
RAZORSAW SELECT 200 Plastic
49035242151191,550yen
Main body161RAZORSAW SELECT 250 Plastic250mm0.7mm1.00mm1.5mm49035240161123,700yen
Spare bladeS-161Spare blade for
RAZORSAW SELECT 250 Plastic
49035242161161,780yen
Parts9150RAZORSAW SELECT GRIP AL-S----49035240915081,380yen
Parts9160RAZORSAW SELECT GRIP AL-M----49035240916071,530yen
Parts9151RAZORSAW SELECT CASE 200200mm---4903524091515680yen
Parts9161RAZORSAW SELECT CASE 250250mm---4903524091614780yen
Parts9171RAZORSAW SELECT CASE 300300mm---4903524091713980yen
*S series, SELECT · EG · grace can share swords.
*Click here for the details of Homeone Recycle series.

List of S series EG specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body121EG-25P PVC Pipe250mm0.5mm0.80mm1.5mm49035244000721,880yen
Spare bladeS-121Spare blade for
EG-25P PVC Pipe
49035244000891,400yen
Main body138EG-25SB Bamboo felling250mm0.7mm1.00mm1.7mm49035244001402,200yen
Spare bladeS-162Spare blade for
RAZORSAW SELECT 250 Bamboo felling
49035242162151,780yen
Main body140EG-25SG Green Wood250mm0.8mm1.12mm3.6mm-2.7mm49035244001642,200yen
Spare bladeS-164Spare blade for
RAZORSAW SELECT 250 Green Wood
49035242164131,780yen
Main body142EG-25SF Fruit Tree250mm0.7mm1.00mm2.5mm49035244001882,200yen
Spare bladeS-166Spare blade for
RAZORSAW SELECT 250 Fruit Tree
49035242166111,780yen
*You can put SELECT blades on Megumi handle, and vice versa.
*Click here for the details of Homeone Recycle series.

List of S series MEGUMI specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body1090MEGUMI USUBA 210 Folding Saw210mm0.6mm0.90mm2.2mm49035240109054,330yen
Spare bladeS-1060Spare blade for
MEGUMI USUBA 210
49035242106021,480yen
Main body1061MEGUMI USUBA 240 with a sheath240mm0.6mm0.90mm2.5mm49035240106154,050yen
Spare bladeS-1061Spare blade for
MEGUMI USUBA 240
49035242106191,530yen
Main body1062MEGUMI USUBA 270 with a sheath270mm0.6mm0.90mm2.5mm49035240106224,200yen
Spare bladeS-1062Spare blade for
MEGUMI USUBA 270
49035242106261,600yen
Main body1063MEGUMI USUBA 300 with a sheath300mm0.6mm0.90mm2.5mm49035240106394,350yen
Spare bladeS-1063Spare blade for
MEGUMI USUBA 300
49035242106331,700yen
Main body1064MEGUMI USUBA 330 with a sheath330mm0.6mm0.90mm2.5mm49035240106464,500yen
Main body1094MEGUMI USUBA 330 Folding Saw49035240109435,250yen
Spare bladeS-1064Spare blade for
MEGUMI USUBA 330
49035242106401,800yen
Main body1074MEGUMI ATSUBA 330 with a sheath330mm0.7mm1.00mm3.0mm49035240107454,500yen
Main body1104MEGUMI ATSUBA 330 Folding Saw49035240110495,250yen
Spare bladeS-1074Spare blade for
MEGUMI ATSUBA 330
49035242107491,800yen
Main body1135MEGUMI ATSUBA 360 Long Handle360mm0.8mm1.10mm2.5mm49035240113539,000yen
Spare bladeS-1075Spare blade for
MEGUMI ATSUBA 360
49035242107562,100yen
Main body1149MEGUMI Metal Parts Set----49035244001261,200yen
*S series, SELECT · EG · grace can share swords.
*Click here for the details of Homeone Recycle series.
RAZORSAW MANUFACTURING CO.,LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO.,LTD. All right reserved.