We tried making the thinnest saw blade, 0.15mm. The cutting edge is 0.25mm thick, so it's great for crafts that requires intricate work. They are more for professionals, but please try using one.
Cross cut teeth are made up of two rows of teeth just like in the diagram above. The edges are very sharp like a cutter knife. Cross cut teeth cut the wood fiber. You can also make cuts diagonally with cross cut teeth. You will not be able to make nice and clean cut along the grain with cross cut teeth because they only cut fibers into smaller pieces.
Rip cut teeth also have teeth lined up in two rows. How it's different from cross cut teeth is that the tip of the tooth is flat and it works like a chisel. They cut by carving the surface of timber. Since they carve timber, there would be more saw dust. The space in between each tooth is bigger than cross cut teeth to prevent saw dust from building up. We don't recommend using rip cut teeth for cross cutting timbers. You will not be able to make smooth cuts.
We apply the same technique when making edges on rip cut teeth as when we make edges on cross cut teeth. By doing so our rip cut teeth can cut plastic that has no fibers. You can make both rip cuts and cross cuts on timber with it. However, it only works on blades with 0.3mm thick or thinner. If the blade is thicker than that, rip cuts does not work well. That's the reason why we say our Usuba saws are rip cut saws.
The teeth pitch becomes bigger as it gets towards the tip of the blade. It's harder to put pressure as it gets away from the handle. By making the size of each tooth bigger, uniform pressure is applied on each tooth. Such characteristics are common on saws with double edges. We apply the same characteristics on cross cut teeth of gardening saws that requires high cutting quality.
The teeth pitch becomes bigger as it gets towards the tip of the blade. It's harder to put pressure as it gets away from the handle. By making the size of each tooth bigger, uniform pressure is applied on each tooth. Such characteristics are common on saws with double edges.
We put a rip cut teeth in between some cross cut teeth. Rip cut teeth digs away saw dust as it cuts the material. The height of rip cut teeth is shorter than that of cross cut teeth. Rip cut teeth don't actually cut the material. Wood working saws with such characteristics can be used to make rip cuts. By putting rip cut teeth on green wood saws, sentei saws, and fruit saws, it helps to cut branch collars as well.
Cutting quality is greatly improved by making some variations on the height of the teeth edges. If the height of all the teeth is the same, it cannot cut the material. We make the variations based on different types of saw. Hand saws work by carving the material. For the best cutting quality, saw dust must be removed from the cutting surface. Teeth with lower height does not cut the material but they just take away saw dust.
Sets are teeth that are slightly bent left and right. This is so that the blade does not get stuck in the material. If the set is too big, the blade does not stabilize, but if it's too small, the blade gets stuck and it's hard to cut the material. We set teeth differently on blades with different thickness. Set teeth makes cutting width bigger than the blade thickness.
Sentei saws have no sets. Instead Sentei saws have taper blade, which works just like sets. Saws with bigger set can make clean cutting surface.
*Our flush cutting saw single edge and double edges have no setting to prevent leaving scratch marks on the material.
The tip at the teeth edges is thickest, and the blade becomes thinner towards the back of the blade. You can make clean cuts even with bigger teeth pitch. It's ideal for felling in the forest by professionals. With clean cuts, you will not damage the tree.
With a curved tip, you can make holes on a flat surface. It would be useful for carpentry work.
These blades are wider than our regular items. Dozuki saws have long back metal, and it gets in the way as you cut the material. By making the blade wider, you can cut materials up to about 6cm thick.
The blade width is thinner than our regular saws. Double edged saws with thinner blade width are easier to handle plus they cut materials better.
Teeth of Komame saws are smaller than our other types of blade. Double edged Komame saws are not only for wood working but can be also used for craft work that requires intricate work. You can use our folding saws with fine teeth for pruning bamboos.
Edges on bamboo saws are very sharp for cutting strong bamboo fibers. Since bamboos are hollow inside, it's hard to start cutting,
but it becomes easier to cut once the blade is in the hollow part. It again becomes harder to cut in the end, and that frequently tears the bamboo skin.
With our bamboo saw, you can make clean cuts without tearing the skin.
We recommend our bamboo saws with a sheath for outdoor use, and we recommend bamboo saws with a straight handle if you'd like to use them for both pruning and for bamboo crafts. If you'd like to use it only for bamboo crafts, we recommend Dozuki extra fine saws and Dozuki saws.
Our plastic saws have special teeth for cutting plastic. They prevent making burr.
Plastic doesn't contain fibers, so our plastic saws have mainly rip cut teeth with some characteristics of cross cut teeth.
They have special teeth for cutting PVC pipes. They also minimize burr.
Our bamboo saws and PVC pipe saws look similar, but the structure is different. Bamboo saws have cross cut teeth and PVC pipe saws have rip cut teeth.
They are mini saw with rip cut teeth. Unlike woodworking saws, surface of teeth is hardened by induction hardening. The core is not hardened.