Japanese pull saw

Top Page > Product info > Details > Q series

Q series

KOBIKI 270mm

They come with a wooden handle and a wooden sheath. The size of the teeth decreases as it gets closer to the handle.

They are ideal for pruning green wood in the forest. You can also use it to cut composite panels for making frames.

Use

For forestry work, landscaping, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body719KOBIKI 270mm270mm0.8mm1.15mm 4.0mm-3.2mm49035240719064,700yen
Spare bladeS-719Spare blade for
KOBIKI 270mm
49035242719002,050yen

KOBIKI 300mm

Wooden handle and wooden sheath

They come with a wooden handle and a wooden sheath. The size of the teeth decreases as it gets closer to the handle. You can use it to cut composite panels for making frames.

Use

For forestry work, landscaping, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body720KOBIKI 300mm300mm0.9mm1.35mm 4.0mm-3.2mm49035240720025,080yen
Spare bladeS-720Spare blade for
KOBIKI 300mm
49035242720062,330yen

KOBIKI 330mm

They come with a wooden handle and a wooden sheath. The size of the teeth decreases as it gets closer to the handle.

They come with a wooden handle and a wooden sheath. The size of the teeth decreases as it gets closer to the handle. You can use it to cut composite panels for making frames.

Use

For forestry work, landscaping, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Wood handle
    • Wooden handles are strong against humidity and dirt. Handle does not get slippery even if you sweat.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body721KOBIKI 330mm330mm1.0mm1.45mm 4.5mm-3.5mm49035240721015,430yen
Spare bladeS-721Spare blade for
KOBIKI 330mm
49035242721052,700yen

List of Q specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body719KOBIKI 270mm270mm0.8mm1.15mm4.0mm-3.2mm49035240719064,700yen
Spare bladeS-719Spare blade for
KOBIKI 270mm
49035242719002,050yen
Main body720KOBIKI 300mm300mm0.9mm1.35mm4.0mm-3.2mm49035240720025,080yen
Spare bladeS-720Spare blade for
KOBIKI 300mm
49035242720062,330yen
Main body721KOBIKI 330mm330mm1.0mm1.45mm4.5mm-3.5mm49035240721015,430yen
Spare bladeS-721Spare blade for
KOBIKI 330mm
49035242721052,700yen
Items listed above have compatible blades.
RAZORSAW MANUFACTURING CO.,LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO.,LTD. All right reserved.