Japanese pull saw

Friday, December 05, 2025 JST     

Top Page > Product info > Details > FUGAKU FL Series

Product info FUGAKU FL Series

Characteristics of FUGAKU FL Series

For more details, click the image below.

5 Types of Blades, 3 Sizes, and 15 Saws Lineup

FUGAKU FL SERIES LINEUP
TAKEHIKI For Bamboo: 240mm, 270mm, and 300mm
KAJU For Fruit Trees: 240mm, 270mm, and 300mm
NAMAKI For Green Wood: 240mm, 270mm, and 300mm
SENTEI For Pruning: 240mm, 270mm, and 300mm
EDAUCHI Curved Saw: 270mm, 300mm, and 330mm
There are 15 blades in total and only one type of handle.

Perfectly Fit Elastome Grip

Elastomer grip fits perfectly in your hand. End of the grip has a small protruding which prevents slipping out of hand when working.

Easy Blade Replacement By Removing Just One Screw

We use a large screw and a nut which does not loosen easily.
It's easier to replace a blade with just one screw compared to two screws. You can easily remove a screw with a coin.

Strap Hole

You can put a string through a strap hole and work safely without a risk of dropping the saw when working high above ground.

Stored Both Ways

The saw can be stored both ways. It doesn't matter which is your dominant hand.

Robust Lock Mechanism

The saw locks in the sheath for safety while it can be easily pulled out when working.

Two Ways Belt Loop And Belt Hook

The sheath can be firmly attached on a belt with a belt loop. Also it can be easily attached and removed using a belt hook.

Dust Hole

End of the sheath is open, and this prevents saw dust from building up inside the sheath.

Blade Replacement Method

1. Use a coin to loosen and remove a screw.
2. Pull the blade out of the handle.
3. Put the new blade on the handle.
4. Attach the screw and tighten it until the blade is firmly attached on the handle.

CAUTION

Wear gloves for blade replacement.
Never touch the serration on the blade.
Make sure the blade is firmly attached to the handle before use.
Check and make sure that the material you are about to cut does not have any metal parts such as nails.

Compatible with the RAZORSAW L series.

FUGAKU FLB24-A BAMBOO

For pruning and felling bamboo.

Saw teeth specialised in cuting bamboos. They are perfect for felling bamboo in bamboo forests. It comes with a sheath that can be attached on a belt.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7143FUGAKU FLB24-A BAMBOO240㎜0.7㎜0.95㎜ 1.7㎜4903524 371433open price
Replacement BladeF714Replacement Blade for
FUGAKU FLB24-A BAMBOO		4903524 371419open price
*Please click here for the L series.

FUGAKU FLB27-A BAMBOO

For bamboo forests.

Saw teeth specialised in cuting bamboos. They are perfect for felling bamboo in bamboo forests. It comes with a sheath that can be attached on a belt.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7153FUGAKU FLB27-A BAMBOO270㎜0.7㎜0.95㎜ 1.7㎜4903524 371532open price
Replacement BladeF715Replacement Blade for
FUGAKU FLB27-A BAMBOO		4903524 371518open price
*Please click here for the L series.

FUGAKU FLB30-A BAMBOO

For volunteer work in bamboo forests!

Saw teeth specialised in cuting bamboos. They are perfect for felling bamboo in bamboo forests. It comes with a sheath that can be attached on a belt.

Use

For bamboo felling, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for woodworking.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our woodworking saws.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7163FUGAKU FLB30-A BAMBOO300㎜0.8㎜1.12㎜ 2.5㎜4903524 371631open price
Replacement BladeF716Replacement Blade for
FUGAKU FLB30-A BAMBOO		4903524 371617open price
*Please click here for the L series.

FUGAKU FLF24-A FRUIT TREE

For pruning fruit trees.

Medium size teeth is perfect for cutting smaller branches. It is perfect for pruning fruit trees and for home gardening.

Use

For pruning fruit trees, pruning green wood and general green wood.

Materials

Green wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7543FUGAKU FLF24-A FRUIT TREE240㎜0.8㎜1.13㎜ 2.5㎜4903524 375431open price
Replacement BladeF754Replacement Blade for
FUGAKU FLF24-A FRUIT TREE		4903524 375417open price
*Please click here for the L series.

FUGAKU FLF27-A FRUIT TREE

For pruning fruit trees.

Medium size teeth is perfect for cutting smaller branches. It is perfect for pruning fruit trees and for home gardening.

Use

For pruning fruit trees, pruning green wood and general green wood.

Materials

Green wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7553FUGAKU FLF27-A FRUIT TREE270㎜0.8㎜1.13㎜ 2.5㎜4903524 375530open price
Replacement BladeF755Replacement Blade for
FUGAKU FLF27-A FRUIT TREE		4903524 375516open price
*Please click here for the L series.

FUGAKU FLF30-A FRUIT TREE

For pruning fruit trees.

Medium size teeth is perfect for cutting smaller branches. It is perfect for pruning fruit trees and for home gardening.

Use

For pruning fruit trees, pruning green wood and general green wood.

Materials

Green wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7563FUGAKU FLF30-A FRUIT TREE300㎜0.85㎜1.15㎜ 3.0㎜4903524 375639open price
Replacement BladeF756Replacement Blade for
FUGAKU FLF30-A FRUIT TREE		4903524 375615open price
*Please click here for the L series.

FUGAKU FLG24-A GREEN WOOD

Smooth start with powerful cuts.

The tooth pitch becomes larger toward the tip of the blade. This makes smooth cuts to start with, and powerful cuts as you start making full strokes. Perfect for landscaping. For felling and pruning in the forest and fruit farms. It comes with a sheath that can be attached on a belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7343FUGAKU FLG24-A GREEN WOOD240㎜0.8㎜1.14㎜ 3.6-2.7㎜4903524 373437open price
Replacement BladeF734Replacement Blade for
FUGAKU FLG24-GREEN WOOD		4903524 373413open price
*Please click here for the L series.

FUGAKU FLG27-A GREEN WOOD

Smooth start with powerful cuts.

The tooth pitch becomes larger toward the tip of the blade. This makes smooth cuts to start with, and powerful cuts as you start making full strokes. Perfect for landscaping. For felling and pruning in the forest and fruit farms. It comes with a sheath that can be attached on a belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7353FUGAKU FLG27-A GREEN WOOD270㎜0.85㎜1.19㎜ 3.7-2.7㎜4903524 373536open price
Replacement BladeF735Replacement Blade for
FUGAKU FLG27-A GREEN WOOD		4903524 373512open price
*Please click here for the L series.

FUGAKU FLG30-A GREEN WOOD

Smooth start with powerful cuts.

The tooth pitch becomes larger toward the tip of the blade. This makes smooth cuts to start with, and powerful cuts as you start making full strokes. Perfect for landscaping. For felling and pruning in the forest and fruit farms. It comes with a sheath that can be attached on a belt.

Use

For landscaping, forestry work, pruning fruit trees, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Crosscut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7363FUGAKU FLG30-A GREEN WOOD300㎜0.9㎜1.22㎜ 3.9-3.1㎜4903524 373635open price
Replacement BladeF736Replacement Blade for
FUGAKU FLG30-A GREEN WOOD		4903524 373611open price
*Please click here for the L series.

FUGAKU FLH24-A SENTEI

For pruning in the forest.

Taper ground blade without sets makes clean cuts. Teeth without set prevent damaging the material, so even saws with larger teeth can make clean cuts. Clean cuts make regeneration of bark faster and greatly reduce stress on trees.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7443FUGAKU FLH24-A SENTEI240㎜1.2㎜1.2㎜ 4.0㎜4903524 374434open price
Replacement BladeF744Replacement Blade for
FUGAKU FLH24-A SENTEI		4903524 374410open price
*Please click here for the L series.

FUGAKU FLH27-A SENTEI

For pruning in the forest.

Taper ground blade without sets makes clean cuts. Teeth without set prevent damaging the material, so even saws with larger teeth can make clean cuts. Clean cuts make regeneration of bark faster and greatly reduce stress on trees.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7453FUGAKU FLH27-A SENTEI270㎜1.2㎜1.2㎜ 4.0㎜4903524 374533open price
Replacement BladeF745Replacement Blade for
FUGAKU FLH27-A SENTEI		4903524 374519open price
*Please click here for the L series.

FUGAKU FLH30-A SENTEI

For pruning in the forests.

Taper ground blade without sets makes clean cuts. Teeth without set prevent damaging the material, so even saws with larger teeth can make clean cuts. Clean cuts make regeneration of bark faster and greatly reduce stress on trees.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Pruning
    • Our Sentei pruning saws have tapered back instead of sets. This way cutting surface is very clean. You can grow trees in better quality.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • With some rip teeth
    • They have rip teeth every certain number of crosscut teeth. It improves cutting quality.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7463FUGAKU FLH30-A SENTEI300㎜1.2㎜1.2㎜ 4.0㎜4903524 374632open price
Replacement BladeF746Replacement Blade for
FUGAKU FLH30-A SENTEI		4903524 374618open price
*Please click here for the L series.

FUGAKU FLC27-A CURVE

Curved saw for making powerful cuts!

Curved pruning saw makes powerful cuts. They are perfect for felling work. For pruning high branches efficiently. It comes with a sheath that can be attached on a belt.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Curved saws
    • Blade with tapered back and no sets. You can make powerful cuts with it. Like our pruning saw for green wood, they are ideal for forestry work.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved saw
    • Curved blade cuts branches more efficiently. For pruning branches, and not for woodworking.
  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7753FUGAKU FLC27-A CURVE270㎜1.4㎜1.3㎜ 4.0㎜4903524 377534open price
Replacement BladeF775Replacement Blade for
FUGAKU FLC27-A CURVE		4903524 377510open price
*Please click here for the L series.

FUGAKU FLC30-A CURVE

Curved saw for making powerful cuts!

Curved pruning saw makes powerful cuts. They are perfect for felling work. For pruning high branches efficiently. It comes with a sheath that can be attached on a belt.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Curved saws
    • Blade with tapered back and no sets. You can make powerful cuts with it. Like our pruning saw for green wood, they are ideal for forestry work.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved saw
    • Curved blade cuts branches more efficiently. For pruning branches, and not for woodworking.
  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7763FUGAKU FLC30-A CURVE300㎜1.4㎜1.3㎜ 4.0㎜4903524 377633open price
Replacement BladeF776Replacement Blade for
FUGAKU FLC30-A CURVE		4903524 377619open price
*Please click here for the L series.

FUGAKU FLC33-A CURVE

Curved saw for making powerful cuts!

Curved pruning saw makes powerful cuts. They are perfect for felling work. For pruning high branches efficiently. It comes with a sheath that can be attached on a belt.

Use

For forestry work, green wood and landscaping.

Materials

Green wood

Characteristics of FUGAKU FL Series Here

Characteristics of the main body

For more details, click the icon.

  • Curved saws
    • Blade with tapered back and no sets. You can make powerful cuts with it. Like our pruning saw for green wood, they are ideal for forestry work.
  • Replaceable blade
    • By changing the blade, have cutting quality of a brand new saw. Item number of replacement blade is marked on the lower right side.
  • With a sheath
    • Our saws with a sheath can be carried around with you on a belt, so they are ideal for pruning trees for landscaping and fruit farms.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of replacement blade is marked on the blade , identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved saw
    • Curved blade cuts branches more efficiently. For pruning branches, and not for woodworking.
  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Teeth without sets
    • To avoid scratching the material. The blade is not processed to spread it to the left or right.
  • Crosscut blade
    • Crosscut saws cut wood fibers at certain width. If you use crosscut saw for making rip cut, you cannot make smooth and easy cuts.

Product specification

List of FL Series specifications
ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main bodyF7773FUGAKU FLC33-A CURVE330㎜1.4㎜1.3㎜ 4.0㎜4903524 377732open price
Replacement BladeF777Replacement Blade for
FUGAKU FLC33-A CURVE		4903524 377718open price
*Please click here for the L series.

List of FL series specifications

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main BodyF7143FUGAKU FLB24-A BAMBOO240㎜0.7㎜0.95㎜1.7㎜4903524 371433open price
Replacement BladeF714Replacement Blade for
FUGAKU FLB24-A BAMBOO		4903524 371419open price
Main BodyF7153FUGAKU FLB27-A BAMBOO270㎜0.7㎜0.95㎜1.7㎜4903524 371532open price
Replacement BladeF715Replacement Blade for
FUGAKU FLB27-A BAMBOO		4903524 371518open price
Main BodyF7163FUGAKU FLB30-A BAMBOO300㎜0.8㎜1.12㎜2.5㎜4903524 371631open price
Replacement BladeF716Replacement Blade for
FUGAKU FLB30-A BAMBOO		4903524 371617open price
Main BodyF7543FUGAKU FLF24-A FRUIT TREE240㎜0.8㎜1.13㎜2.5㎜4903524 375431open price
Replacement BladeF754Replacement Blade for
FUGAKU FLF24-A FRUIT TREE		4903524 375417open price
Main BodyF7553FUGAKU FLF27-A FRUIT TREE270㎜0.8㎜1.13㎜2.5㎜4903524 375530open price
Replacement BladeF755Replacement Blade for
FUGAKU FLF27-A FRUIT TREE		4903524 375516open price
Main BodyF7563FUGAKU FLF30-A FRUIT TREE300㎜0.85㎜1.15㎜3.0㎜4903524 375639open price
Replacement BladeF756Replacement Blade for
FUGAKU FLF30-A FRUIT TREE		4903524 375615open price
Main BodyF7343FUGAKU FLG24-A GREEN WOOD240㎜0.8㎜1.14㎜3.6-2.7㎜4903524 373437open price
Replacement BladeF734Replacement Blade for
FUGAKU FLG24-GREEN WOOD		4903524 373413open price
Main BodyF7353FUGAKU FLG27-A GREEN WOOD270㎜0.85㎜1.19㎜3.7-2.7㎜4903524 373536open price
Replacement BladeF735Replacement Blade for
FUGAKU FLG27-A GREEN WOOD		4903524 373512open price
Main BodyF7363FUGAKU FLG30-A GREEN WOOD300㎜0.9㎜1.22㎜3.9-3.1㎜4903524 373635open price
Replacement BladeF736Replacement Blade for
FUGAKU FLG30-A GREEN WOOD		4903524 373611open price
Main BodyF7443FUGAKU FLH24-A SENTEI240㎜1.2㎜1.2㎜4.0㎜4903524 374434open price
Replacement BladeF744Replacement Blade for
FUGAKU FLH24-A SENTEI		4903524 374410open price
Main BodyF7453FUGAKU FLH27-A SENTEI270㎜1.2㎜1.2㎜4.0㎜4903524 374533open price
Replacement BladeF745Replacement Blade for
FUGAKU FLH27-A SENTEI		4903524 374519open price
Main BodyF7463FUGAKU FLH30-A SENTEI300㎜1.2㎜1.2㎜4.0㎜4903524 374632open price
Replacement BladeF746Replacement Blade for
FUGAKU FLH30-A SENTEI		4903524 374618open price
Main BodyF7753FUGAKU FLC27-A CURVE270㎜1.4㎜1.3㎜4.0㎜4903524 377534open price
Replacement BladeF775Replacement Blade for
FUGAKU FLC27-A CURVE		4903524 377510open price
Main BodyF7763FUGAKU FLC30-A CURVE300㎜1.4㎜1.3㎜4.0㎜4903524 377633open price
Replacement BladeF776Replacement Blade for
FUGAKU FLC30-A CURVE		4903524 377619open price
Main BodyF7773FUGAKU FLC33-A CURVE330㎜1.4㎜1.3㎜4.0㎜4903524 377732open price
Replacement BladeF777Replacement Blade for
FUGAKU FLC33-A CURVE		4903524 377718open price
*The blades are compatible. But depending on the shape and the length of the blade, the blade might not exactly fit in the sheath you have.
*Please see here for the L series.
RAZORSAW MANUFACTURING CO., LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO., LTD. All right reserved.