Japanese pull saw

Top Page > Product info > Details > H series

Promotion Video of Bamboo saw with a straight handle


Line up

TAKEHIKI NOKO 240, TAKEHIKI NOKO 240 EVAGRIP, TAKEHIKI NOKO 330 EVAGRIP

Special teeth for cutting bamboo. The standard 240mm and 330mm for cutting moso bamboo. For bamboo craft and pruning bamboos.

H series Takehiki Noko

TAKEHIKI NOKO 330 EVAGRIP

You can cut moso bamboos too!

EVAGRIP made out of elastomer resin. 330mm blade is suited for cutting large moso bamboos.

Use

For bamboo crafts, cutting bamboo materials, and cutting general timber.

Materials

Bamboo, General timber, and Laminated wood

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body424TAKEHIKI NOKO 330 EVAGRIP330mm0.8mm1.12mm 2.5mm49035240424183,780yen
Spare bladeS-424Spare blade for
TAKEHIKI NOKO 330 EVAGRIP
49035242424122,250yen

Promotion Video of Timberman's saw with a straight handle


Lineup

RAZORSAW KARIWAKU 300 EVAGRIP, RAZORSAW KARIWAKU 330 EVAGRIP

Kariwaku saw with a straight handle. Available in 300mm and 330mm. The handle is long, so you can you both hands when cutting wood. By doing so, you can cut faster with less stress.

H series Kariwaku

RAZORSAW KARIWAKU 300 EVAGRIP

For cutting lumber as well as wood logs.

Kariwaku saw with a straight handle. You can use both hand when working with it, so you can work more effectively.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle boards (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body501RAZORSAW KARIWAKU 300 EVAGRIP300mm0.8mm1.12mm 3.0mm49035240501163,630yen
Spare bladeS-501Spare blade for
RAZORSAW KARIWAKU 300 EVAGRIP
49035242501102,100yen

RAZORSAW KARIWAKU 330 EVAGRIP

You can easily cut wood logs too!

Kariwaku saw with a straight handle. You can use both hands when working with it, so you can cut more efficiently.

Use

For timberman's and cutting general timber

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body507RAZORSAW KARIWAKU 330 EVAGRIP330mm0.8mm1.12mm 3.0mm49035240507103,780yen
Spare bladeS-507Spare blade for
RAZORSAW KARIWAKU 330 EVAGRIP
49035242507142,250yen

List of H Series specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body424TAKEHIKI NOKO 330 EVAGRIP330mm0.8mm1.12mm2.5mm49035240424183,780yen
Spare bladeS-424Spare blade for
TAKEHIKI NOKO 330 EVAGRIP
49035242424122,250yen
Main body501RAZORSAW KARIWAKU 300 EVAGRIP300mm0.8mm1.12mm3.0mm49035240501163,630yen
Spare bladeS-501Spare blade for
RAZORSAW KARIWAKU 300 EVAGRIP
49035242501102,100yen
Main body507RAZORSAW KARIWAKU 330 EVAGRIP330mm0.8mm1.12mm3.0mm49035240507103,780yen
Spare bladeS-507Spare blade for
RAZORSAW KARIWAKU 330 EVAGRIP
49035242507142,250yen
The items listed above have compatible blades.
RAZORSAW MANUFACTURING CO.,LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO.,LTD. All right reserved.