Japanese pull saw

Top Page > Product info > Details > F series

RAZORSAW Folding Saw Lineup

RAZORSAW ORIKOMI 200 All Purpose

Can be used to cut different materials.

There are two steps adjustment of opening angles. If you are looking for a general hand saw for cutting all sorts of materials, such as general timber, green wood, and plastic, this is the one to choose. When it's folded, you can safely store it in your tool box without damaging the blade.

Use

For timberman's, landscaping, wood working, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body810RAZORSAW ORIKOMI 200 All Purpose200mm0.7mm1.05mm 2.2mm49035240810113,180yen
Spare bladeS-810Spare blade for
RAZORSAW ORIKOMI 200 All Purpose
49035242810151,800yen

RAZORSAW ORIKOMI 250 All Purpose

If you are not sure which saw to choose, choose all purpose folding saw!

The handle can be adjusted to two different angles. This is the saw for people who want to cut different kinds of materials such as general timber, green wood, and plastic. When it's folded, you can safely store it in your tool box.

Use

For timberman's, landscaping, wood working, green wood, and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, Bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body812RAZORSAW ORIKOMI 250 All Purpose250mm0.8mm1.13mm 2.5mm49035240812193,750yen
Spare bladeS-812Spare blade for
RAZORSAW ORIKOMI 250 All Purpose
49035242812132,000yen

RAZORSAW ORIKOMI 200 Extra-Fine Teeth

Best cutting quality and clean cutting surface!

The handle can be adjusted to two different angles. Extra-fine teeth are suited for cutting bamboo and for craft work. Can be used to prune bamboo in the forest.

Use

For bamboo felling, wood working, wood crafts and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.
  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and wood working. Folding saws are for pruning bamboos.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body814RAZORSAW ORIKOMI 200 Extra-Fine Teeth200mm0.7mm1.00mm 1.5mm49035240814173,180yen
Spare bladeS-814Spare blade for
RAZORSAW ORIKOMI 200 Extra-Fine Teeth
49035242814111,800yen

RAZORSAW ORIKOMI 250 Extra-Fine Teeth

Good for wood crafts too!

The handle can be adjusted to two different angles. Extra-fine teeth are suited for cutting bamboo and for craft work. Can be used to prune bamboo in the forest.

Use

For bamboo felling, wood working, wood crafts, and bamboo crafts

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.
  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and wood working. Folding saws are for pruning bamboos.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body815RAZORSAW ORIKOMI 250 Extra-Fine Teeth250mm0.8mm1.10mm 1.7mm49035240815163,750yen
Spare bladeS-815Spare blade for
RAZORSAW ORIKOMI 250 Extra-Fine Teeth
49035242815102,000yen

RAZORSAW ORIKOMI 200 Large Teeth

Smooth and easy cut to start, and powerful cut as you start cutting with full strokes.

The handle can be adjusted to two different angles. Size of the tooth becomes smaller as it gets closer to the handle. It gives you powerful cut as you start cutting with full strokes. If you would like to keep the saw in your tool box, we recommend a folding saw.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General wood, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body811RAZORSAW ORIKOMI 200 Large Teeth200mm0.8mm1.12mm 3.5-2.6mm49035240811103,180yen
Spare bladeS-811Spare blade for
RAZORSAW ORIKOMI 200 Large Teeth
49035242811141,800yen

RAZORSAW ORIKOMI 250 Large Teeth

For landscaping and frame working!

The handle can be adjusted to two different angles. The size of the tooth is biggest on the tip of the blade, and it gradually becomes smaller towards the handle. Such structure gives you a powerful cut.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body813RAZORSAW ORIKOMI 250 Large Teeth250mm0.85mm1.18mm 3.6-2.7mm49035240813183,750yen
Spare bladeS-813Spare blade for
RAZORSAW ORIKOMI 250 Large Teeth
49035242813122,000yen

FD series Lineup

RAZORSAW FD-20A All Purpose

Can be used for different purposes!

By putting some rip cut teeth in between cross cut teeth, you can make clean cuts across the grain, parallel to the grain, and diagonally to the grain. It gives you smooth cut with clean cutting surface.

Use

For timberman's, landscaping, wood working, green wood and bamboo felling.

Materials

Laminated wood, General timber, Composite wood panel, Green wood, bamboo, Particle board (OSB), and PVC pipe

Characteristics of the main body

For more details, click the icon.

  • All purpose
    • If you are looking for multipurpose saw, this is the one to get. You can cut timbers, green wood, and PVC pipes.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body840RAZORSAW FD-20A All Purpose200mm0.7mm1.05mm 2.2mm49035240840123,830yen
Spare bladeS-840Spare blade for
RAZORSAW FD-20A All Purpose
49035242840161,800yen

RAZORSAW FD-20B Bamboo

For smooth cuts and clean cutting surface!

They have special teeth for cutting bamboos. You can make clean cuts.

Use

For bamboo felling, wood working, wood crafts, and bamboo crafts.

Materials

Bamboo, Laminated wood, General timber, Composite wood panel, MDF panel, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Bamboo saws
    • Our bamboo saws are for wood craft, bamboo craft, and final touch for wood working.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for bamboo
    • Since bamboos have tough fiber, our bamboo saws have sharper edges compared to our wood working saws.
  • Komame small teeth
    • Komame saws with fine teeth. Double edge saws are for craft work and wood working. Folding saws are for pruning bamboos.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body842RAZORSAW FD-20B Bamboo200mm0.7mm1.00mm 1.5mm49035240842103,830yen
Spare bladeS-842Spare blade for
RAZORSAW FD-20B Bamboo
49035242842141,800yen

RAZORSAW FD-20T Timberman's

Tapered blade with some rip cut teeth.

You can cut along, across, and diagonally to the grain, so it's suited for cutting materials with complicated fiber pattern.

Use

For timberman's and cutting general timber.

Materials

Composite wood panel, Particle board (OSB), General timber, Laminated wood, and Wood log

Characteristics of the main body

For more details, click the icon.

  • Timberman's
    • Our Timberman's saws have teeth specialized in cutting composite wood fast.
      You can cut materials fast with it.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Tapered back
    • Blade is thicker towards the teeth, and thinner towards the back. You can make clean cuts, so they are ideal for forestry work.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Teeth without sets
    • Tapered blade works just like sets. Our pruning saws with tapered back has no sets.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body845RAZORSAW FD-20T Timberman's200mm1.1mm1.15mm 3.0mm49035240845174,080yen
Spare bladeS-845Spare blade for
RAZORSAW FD-20T Timberman's
49035242845112,050yen

RAZORSAW FD-20J Plastic

Special teeth for cutting plastic!

Tough teeth cut PVC pipes and hard materials smooth and clean.

Use

For PVC piping work, and cutting plastic.

Materials

PVC pipe, Acrylic resin, and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip cut teeth with special edges for cutting plastic. The teeth on plastic saws are tough.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Special teeth for plastic
    • Our plastic saws have rip cut teeth with some characteristics of cross cut teeth for cutting plastic that have no fiber.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body843RAZORSAW FD-20J Plastic200mm0.6mm0.90mm 1.5mm49035240843193,830yen
Spare bladeS-843Spare blade for
RAZORSAW FD-20J Plastic
49035242843131,800yen

RAZORSAW FD-20G Green Wood

The opening angle of the saw can be adjusted by two types.

Smooth cutting to start with, and powerful cut as you start cutting with full strokes.

Use

For green wood, landscaping, and timberman's.

Materials

Green wood, Laminated wood, General timber, and Composite wood panel

Characteristics of the main body

For more details, click the icon.

  • Green wood
    • Green wood saws are for pruning and landscaping. Curved saws are for pruning in the forest, and fruit saws are for pruning fruit trees.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut decreasing pitch
    • Tip of the blade has bigger teeth pitch. The size of the teeth becomes smaller as it gets closer to the handle.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body841RAZORSAW FD-20G Green Wood200mm0.8mm1.12mm 3.5-2.6mm49035240841113,830yen
Spare bladeS-841Spare blade for
RAZORSAW FD-20G Green Wood
49035242841151,800yen

RAZORSAW FD-20F Fruit Tree

The opening angle of the saw can be adjusted by two types.

Medium size teeth do not shake the branches as much as large teeth. This makes clean cuts and prevent damaging the trees.

Use

For pruning fruit trees and general green wood.

Materials

Green wood

Characteristics of the main body

For more details, click the icon.

  • Fruit tree
    • Pruning saws for fruit trees have smaller teeth than our other pruning saws for green wood.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Folding saw
    • Blade can be folded into the handle. You can put them in your tool box.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body844RAZORSAW FD-20F Fruit Tree200mm0.7mm1.00mm 2.2mm49035240844183,830yen
Spare bladeS-844Spare blade for
RAZORSAW FD-20F Fruit Tree
49035242844121,800yen

List of F series specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body810RAZORSAW ORIKOMI 200 All Purpose200mm0.7mm1.05mm2.2mm49035240810113,180yen
Spare bladeS-810Spare blade for
RAZORSAW ORIKOMI 200 All Purpose
49035242810151,800yen
Main body812RAZORSAW ORIKOMI 250 All Purpose250mm0.8mm1.13mm2.5mm49035240812193,750yen
Spare bladeS-812Spare blade for
RAZORSAW ORIKOMI 250 All Purpose
49035242812132,000yen
Main body814RAZORSAW ORIKOMI 200 Extra-Fine Teeth200mm0.7mm1.00mm1.5mm49035240814173,180yen
Spare bladeS-814Spare blade for
RAZORSAW ORIKOMI 200 Extra-Fine Teeth
49035242814111,800yen
Main body815RAZORSAW ORIKOMI 250 Extra-Fine Teeth250mm0.8mm1.10mm1.7mm49035240815163,750yen
Spare bladeS-815Spare blade for
RAZORSAW ORIKOMI 250 Extra-Fine Teeth
49035242815102,000yen
Main body811RAZORSAW ORIKOMI 200 Large Teeth200mm0.8mm1.12mm3.5-2.6mm49035240811103,180yen
Spare bladeS-811Spare blade for
RAZORSAW ORIKOMI 200 Large Teeth
49035242811141,800yen
Main body813RAZORSAW ORIKOMI 250 Large Teeth250mm0.85mm1.18mm3.6-2.7mm49035240813183,750yen
Spare bladeS-813Spare blade for
RAZORSAW ORIKOMI 250 Large Teeth
49035242813122,000yen
Main body840RAZORSAW FD-20A All Purpose200mm0.7mm1.05mm2.2mm49035240840123,830yen
Spare bladeS-840Spare blade for
RAZORSAW FD-20A All Purpose
49035242840161,800yen
Main body842RAZORSAW FD-20B Bamboo200mm0.7mm1.00mm1.5mm49035240842103,830yen
Spare bladeS-842Spare blade for
RAZORSAW FD-20B Bamboo
49035242842141,800yen
Main body845RAZORSAW FD-20T Timberman's200mm1.1mm1.15mm3.0mm49035240845174,080yen
Spare bladeS-845Spare blade for
RAZORSAW FD-20T Timberman's
49035242845112,050yen
Main body843RAZORSAW FD-20J Plastic200mm0.6mm0.90mm1.5mm49035240843193,830yen
Spare bladeS-843Spare blade for
RAZORSAW FD-20J Plastic
49035242843131,800yen
Main body841RAZORSAW FD-20G Green Wood200mm0.8mm1.12mm3.5-2.6mm49035240841113,830yen
Spare bladeS-841Spare blade for
RAZORSAW FD-20G Green Wood
49035242841151,800yen
Main body844RAZORSAW FD-20F Fruit Tree200mm0.7mm1.00mm2.2mm49035240844183,830yen
Spare bladeS-844Spare blade for
RAZORSAW FD-20F Fruit Tree
49035242844121,800yen
*Although spare blades listed above are compatible, longer teeth might not exactly fit in the handle when it's folded.
RAZORSAW MANUFACTURING CO.,LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO.,LTD. All right reserved.