Japanese pull saw

Top Page > Product info > Details > A series

Dozuki Promotion Video


Lineup

Razorsaw A with rattan handle, Razorsaw A with EVA GRIP, Razorsaw ZA with rattan handle, and Razorsaw ZA with EVA GRIP

You can make fine cuts, and they are ideal for craft work. The blade is only 0.3mm thick. They come in two different styles, A and ZA. Razorsaw A is our regular craft saw, and Razorsaw ZA has a curved tip which you can use to make holes on a flat surface. Available with a traditional rattan handle or EVA grip.

Product infomation A series Lineup

RAZORSAW A

Great for craft work for making fine cuts!

0.3mm thin blade with a traditional rattan handle. They are great for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures, and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body300RAZORSAW A240mm0.3mm0.51mm 1.5mm49035240300023,950yen
Spare bladeS-300Spare blade for
RAZORSAW A
49035242300061,780yen

RAZORSAW A EVAGRIP

Fine cut saw with the best cutting quality!

EVA grip is made out of elastomer resin. The blade is just 0.3mm thick. They are ideal for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica Laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body301RAZORSAW A EVAGRIP240mm0.3mm0.51mm 1.5mm49035240301183,950yen
Spare bladeS-300Spare blade for
RAZORSAW A
49035242300061,780yen

RAZORSAW ZA

Curved tip for craft work!

0.3mm thin blade with a traditional rattan handle. They are great for finishing work. The blade is firmly attached to the handle with a full back metal.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body306RAZORSAW ZA240mm0.3mm0.51mm 1.5mm49035240300264,380yen
Spare bladeS-306Spare blade for
RAZORSAW ZA
49035242300202,030yen

RAZORSAW ZA EVAGRIP

Saiku fine cut saw that can cut holes.

Grip is made with elastomer resin which prevents slipping. You can make holes on a flat surface using the curved tip. Long back metal holds the blade firmly.

Use

For carpentry work, wood crafts, bamboo crafts, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body307RAZORSAW ZA EVAGRIP240mm0.3mm0.51mm 1.5mm49035240307124,380yen
Spare bladeS-306Spare blade for
RAZORSAW ZA
49035242300202,030yen

TATEBIKI NOKO -Trade only products-

For making tenons and for cutting hard wood!

Rip cut teeth are good for both rip cutting and cross cutting, and for making tenons. Rip cut teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For precision wood working, bamboo crafts, carpentry work, making furnitures and musical instruments.

Materials

General timber, Deking material, Ply wood, Laminated wood, Ebony, Rose wood, Formica Laminate, MDF panel, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Rip cut
    • The blade width is narrower than Saiku fine teeth. We offer standard Dozuki, Dozuki Wide Type, and Dozuki Noko Tatebiki Style.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip cut teeth
    • By making rip cut edges on cross cut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body303TATEBIKI NOKO -Trade only products-240mm0.3mm0.52mm 1.5mm4903524030316Open price
Spare bladeS-303Spare blade for
TATEBIKI NOKO
4903524230310Open price

TATEBIKI NOKO EVAGRIP -Trade only products-

For making tenons and for cutting hard wood!

Rip cut teeth are good for both rip cutting and cross cutting, and for making tenons. Rip cut teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For precision wood working, bamboo crafts, carpentry work, making furnitures and musical instruments.

Materials

General timber, Deking material, Ply wood, Laminated wood, Ebony, Rose wood, Formica Laminate, MDF panel, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Rip cut
    • The blade width is narrower than Saiku fine teeth. We offer standard Dozuki, Dozuki Wide Type, and Dozuki Noko Tatebiki Style.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip cut teeth
    • By making rip cut edges on cross cut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body304TATEBIKI NOKO EVAGRIP -Trade only products-240mm0.3mm0.52mm 1.5mm4903524400683Open price
Spare bladeS-303Spare blade for
TATEBIKI NOKO
4903524230310Open price

SAN CHILD -Trade only products-

For making tenons and for cutting hard wood!

Rip cut teeth are good for both rip cutting and cross cutting, and for making tenons. Rip cut teeth can do tough work, so they are also useful when cutting hard wood such as decking materials and plastic. Dozuki with a blade that's 0.3mm thick.

Use

For precision wood working, bamboo crafts, carpentry work, making furnitures and musical instruments.

Materials

General timber, Deking material, Ply wood, Laminated wood, Ebony, Rose wood, Formica Laminate, MDF panel, and Acrylic resin

Characteristics of the main body

For more details, click the icon.

  • Rip cut
    • The blade width is narrower than Saiku fine teeth. We offer standard Dozuki, Dozuki Wide Type, and Dozuki Noko Tatebiki Style.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip cut teeth
    • By making rip cut edges on cross cut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body311SAN CHILD -Trade only products-240mm0.3mm0.51mm 1.3mm4903524031115Open price
Spare bladeS-311Spare blade for
SAN CHILD
4903524231119Open price

List of A series specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body300RAZORSAW A240mm0.3mm0.51mm1.5mm49035240300023,950yen
Main body301RAZORSAW A EVAGRIP49035240301183,950yen
Spare bladeS-300Spare blade for
RAZORSAW A
49035242300061,780yen
Main body306RAZORSAW ZA240mm0.3mm0.51mm1.5mm49035240300264,380yen
Main body307RAZORSAW ZA EVAGRIP49035240307124,380yen
Spare bladeS-306Spare blade for
RAZORSAW ZA
49035242300202,030yen
Main body303TATEBIKI NOKO -Trade only products-240mm0.3mm0.52mm1.5mm4903524030316Open price
Main body304TATEBIKI NOKO EVAGRIP -Trade only products-4903524400683Open price
Spare bladeS-303Spare blade for
TATEBIKI NOKO
4903524230310Open price
Main body311SAN CHILD -Trade only products-240mm0.3mm0.51mm1.3mm4903524031115Open price
Spare bladeS-311Spare blade for
SAN CHILD
4903524231119Open price
*The blades listed above are compatible. They fit on both rattan handle and EVA GRIP.
RAZORSAW MANUFACTURING CO.,LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO.,LTD. All right reserved.