Japanese pull saw

Top Page > Product info > Details > C D E J series

RAZORSAW 180 series Promotion Video


Line up

Dozuki Extra Fine --- Razorsaw 180 DOZUKI, Razorsaw 180 DOZUKI Rattan Handle
Dozuki Fine --- Razorsaw 180 KOMAME, Razorsaw 180 KKOMAME Rattan Handle
Dozuki --- Razorsaw 180 USUBA, Razorsaw 180 USUBA Rattan Handle
Wood Working --- Razorsaw 180 ATSUBA, Razorsaw 180 ATSUBA Rattan Handle
Double edge --- Razorsaw 180 RYOBA, Razorsaw 180 RYOBA Rattan Handle
Plastic --- Razorsaw 180 JYUSI, Razorsaw 180 JYUSI Handle

180mm series are small, so you can put them in your tool box. There are 12 types of blades for cutting different materials.

Dozuki Extra Fine ( C series )

RAZORSAW 180 DOZUKI

Small handy saw for professionals!

They come with a handle made out of elastomer resin. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. The long metal spline holds the blade.

Use

For precision wood working, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body297RAZORSAW 180 DOZUKI180mm0.3mm0.46mm 1.0mm 49035240297162,960yen
Spare bladeS-297Spare blade for
RAZORSAW 180 DOZUKI
49035242297101,700yen

RAZORSAW 180 DOZUKI Rattan Handle -Trade only products-

Small handy saw for professionals!

0.3mm thin blade with a traditional rattan handle. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. The long metal spline holds the blade.

Use

For precision wood working, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body297WRAZORSAW 180 DOZUKI Rattan Handle -Trade only products-180mm0.3mm0.46mm 1.0mm 4903524300259Open price
Spare bladeS-297Spare blade for
RAZORSAW 180 DOZUKI
4903524229710Open price

List of C series specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body297RAZORSAW 180 DOZUKI180mm0.3mm0.46mm1.0mm 49035240297162,960yen
Main body297WRAZORSAW 180 DOZUKI Rattan Handle -Trade only products- 4903524300259Open price
Spare bladeS-297Spare blade for
RAZORSAW 180 DOZUKI
4903524229710Open price
*Products listed above have compatible blades.

Dozuki Fine ( D series )

RAZORSAW 180 KOMAME -Trade only products-

Small handy saw for professionals!

They come with a handle made out of elastomer resin. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. The long metal spline holds the blade.

Use

For precision wood working, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body292RAZORSAW 180 KOMAME -Trade only products-180mm0.3mm0.46mm 1.0mm 4903524029211Open price
Spare bladeS-292Spare blade for
RAZORSAW 180 KOMAME
4903524229215Open price

RAZORSAW 180 KOMAME Rattan Handle -Trade only products-

Small handy saw for professionals!

0.3mm thin blade with a traditional rattan handle. Our 180mm Dozuki saws are 0.3mm thick. They are great for finishing work. The long metal spline holds the blade.

Use

For precision wood working, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

General timber, Laminated wood, Bamboo material, Ply wood, MDF panel, Particle board (OSB), and Formica laminate

Characteristics of the main body

For more details, click the icon.

  • Dozuki extra fine
    • Dozuki wide type can cut materials up to 60mm thick. Tatebiki Noko Dozuki Style can make both cross cuts and rip cuts.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body292WRAZORSAW 180 KOMAME Rattan Handle -Trade only products-180mm0.3mm0.46mm 1.0mm 4903524300228Open price
Spare bladeS-292Spare blade for
RAZORSAW 180 KOMAME
4903524229215Open price

Dozuki

RAZORSAW 180 USUBA

It's small, but very handy!

The blade is 0.3mm thick with EVA grip. The tip of the blade is curved, so you can cut a hole on a flat surface.

Use

For wood crafts, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body290RAZORSAW 180 USUBA180mm0.3mm0.51mm 1.5mm49035240290132,480yen
Spare bladeS-290Spare blade for
RAZORSAW 180 USUBA
49035242290171,300yen

RAZORSAW 180 USUBA Rattan Handle -Trade only products-

It's small, but very handy!

0.3mm thin blade with a traditional rattan handle. The tip of the blade is curved, so you can cut a hole on a flat surface.

Use

For wood crafts, bamboo crafts, DIY, carpentry work, making furnitures and musical instruments.

Materials

MDF panel, Ply wood, General timber, Bamboo material, Formica laminate, Laminated wood, and Particle board (OSB)

Characteristics of the main body

For more details, click the icon.

  • Dozuki
    • For wood craft, bamboo craft, and final touch for wood working. Cutting width is very thin and clean.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body290WRAZORSAW 180 USUBA Rattan Handle -Trade only products-180mm0.3mm0.51mm 1.5mm4903524300204Open price
Spare bladeS-290Spare blade for
RAZORSAW 180 USUBA
4903524229017Open price

Plastic

RAZORSAW 180 JYUSI

No problem cutting hard wood!

0.3mm thick rip cut saw with EVA grip. Rip cut saws can be used to make cross cuts too. The teeth are for tough work, so you can cut hard materials such as decking material and plastic. They have long metal spline that firmly attaches a blade onto the handle.

Use

For cutting plastic, wood crafts, carpentry work, DIY, making furnitures, sculpturing and musical instruments.

Materials

Acrylic resin, Formica laminate, Ebony, Rose wood, Deking material, PVC, General timber, Laminated wood, and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip cut teeth with special edges for cutting plastic. The teeth on plastic saws are tough.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip cut teeth
    • By making rip cut edges on cross cut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body295RAZORSAW 180 JYUSI180mm0.3mm0.52mm 1.5mm49035240295182,480yen
Spare bladeS-295Spare blade for
RAZORASW 180 JYUSI
49035242295121,300yen

RAZORSAW 180 JYUSI Rattan Handle -Trade only products-

No problem cutting hard wood!

0.3mm thick rip cut saw with rattan handle. Rip cut saws can be used to make cross cuts too. The teeth are for tough work, so you can cut hard materials such as decking material and plastic. They have long metal spline that firmly attaches a blade onto the handle.

Use

For cutting plastic, wood crafts, carpentry work, DIY, making furnitures, sculpturing and musical instruments.

Materials

Acrylic resin, Formica laminate, Ebony, Rose wood, Deking material, PVC, General timber, Laminated wood, and Ply wood

Characteristics of the main body

For more details, click the icon.

  • Plastic
    • Since plastic have no fiber, plastic saws have rip cut teeth with special edges for cutting plastic. The teeth on plastic saws are tough.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Usuba with rip cut teeth
    • By making rip cut edges on cross cut teeth, teeth becomes tougher. Can be used to make tenons and to cut hard wood.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body295WRAZORSAW 180 JYUSI Rattan Handle -Trade only products-180mm0.3mm0.52mm 1.5mm4903524300242Open price
Spare bladeS-295Spare blade for
RAZORASW 180 JYUSI
4903524229512Open price

List of D series specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body290RAZORSAW 180 USUBA180mm0.3mm0.51mm1.5mm49035240290132,480yen
Main body290WRAZORSAW 180 USUBA Rattan Handle -Trade only products-4903524300204Open price
Spare bladeS-290Spare blade for
RAZORSAW 180 USUBA
4903524229017Open price
Main body292RAZORSAW 180 KOMAME -Trade only products-180mm0.3mm0.46mm1.0mm 4903524029211Open price
Main body292WRAZORSAW 180 KOMAME Rattan Handle -Trade only products- 4903524300228Open price
Spare bladeS-292Spare blade for
RAZORSAW 180 KOMAME
4903524229215Open price
Main body295RAZORSAW 180 JYUSI180mm0.3mm0.52mm1.5mm49035240295182,480yen
Main body295WRAZORSAW 180 JYUSI Rattan Handle -Trade only products-4903524300242Open price
Spare bladeS-295Spare blade for
RAZORASW 180 JYUSI
4903524229512Open price
*Products listed above have compatible blades.

Wood Working ( E series )

RAZORSAW 180 ATUBA

You can cut along, across, and diagonally to the grain.

EVA grip is made out of elastomer resin. It's a 0.5mm thick wood working saw. The blade is thick and tough and easy to use.

Use

For DIY, wood crafts, carpentry work, making furnitures, musical instruments, and bamboo crafts.

Materials

Laminated wood, General timber, Composite wood panel, MDF panel, Particle board (OSB), Ply wood, and Bamboo material

Characteristics of the main body

For more details, click the icon.

  • Wood working
    • Ideal for carpentry work and DIY. Wood working saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body293RAZORSAW 180 ATUBA180mm0.5mm0.81mm 1.5mm49035240293102,480yen
Spare bladeS-293Spare blade for
RAZORSAW 180 ATUBA
49035242293141,300yen

RAZORSAW 180 ATUBA Rattan Handle -Trade only products-

You can cut along, across, and diagonally to the grain.

Rattan handle is made out of elastomer resin. It's a 0.5mm thick wood working saw. The blade is thick and tough and easy to use.

Use

For DIY, wood crafts, carpentry work, making furnitures, musical instruments, and bamboo crafts.

Materials

Laminated wood, General timber, Composite wood panel, MDF panel, Particle board (OSB), Ply wood, and Bamboo material

Characteristics of the main body

For more details, click the icon.

  • Wood working
    • Ideal for carpentry work and DIY. Wood working saws are grouped into either single edge saws or double edge saws.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Curved tip
    • The tip of the blade is curved. With such structure, you can make holes on a flat surface. Ideal for carpentry work.
  • Rip cut teeth
    • They have rip cut teeth every certain number of cross cut teeth. It improves cutting quality.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body293WRAZORSAW 180 ATUBA Rattan Handle -Trade only products-180mm0.5mm0.81mm 1.5mm4903524300235Open price
Spare bladeS-293Spare blade for
RAZORSAW 180 ATUBA
49035242293141,300yen

List of E series specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body293RAZORSAW 180 ATUBA180mm0.5mm0.81mm1.5mm49035240293102,480yen
Main body293WRAZORSAW 180 ATUBA Rattan Handle -Trade only products-4903524300235Open price
Spare bladeS-293Spare blade for
RAZORSAW 180 ATUBA
49035242293141,300yen
*Products listed above have compatible blades.

Double edge ( J series )

RAZORSAW 180 RYOBA

Small, but very handy!

You can make both cross cuts and rip cuts with a double edge saw. They are great for craft work and wood work.

Use

For DIY, wood crafts, carpentry work, making furnitures, sculpturing, musical instruments, and bamboo crafts.

Materials

Particle board (OSB), MDF panel, General timber, Laminated wood, Composite wood panel, and Bamboo material

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and cross cuts with a double edge wood working saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • EVA GRIP
    • EVA GRIP prevents slipping and prevents putting pressure on the wrist. With built in screw, it's easier and faster to replace a blade.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body291RAZORSAW 180 RYOBA180mm0.5mm0.81mm
0.79mm
1.5mm
3.7-2.7mm
49035240291122,610yen
Spare bladeS-291Spare blade for
RAZORSAW 180 RYOBA
49035242291161,430yen
*Cutting width and teeth pitch on the first row are for cross cut teeth, and the ones on the second row are for rip cut teeth.

RAZORSAW 180 RYOBA Rattan Handle -Trade only products-

Small, but very handy!

You can make both cross cuts and rip cuts with a double edge saw. They are great for craft work and wood work.

Use

For DIY, wood crafts, carpentry work, making furnitures, sculpturing, musical instruments, and bamboo crafts.

Materials

Particle board (OSB), MDF panel, General timber, Laminated wood, Composite wood panel, and Bamboo material

Characteristics of the main body

For more details, click the icon.

  • Double edges
    • You can make both rip cuts and cross cuts with a double edge wood working saw. The teeth pitch is smaller for making extra clean cuts.
  • Replaceable blade
    • By changing the blade, you will have cutting quality of a brand new saw. Item number of spare blade is marked on the lower right side.
  • Rattan handle
    • Rattan handle gives you good grip even when you sweat. It is the traditional rattan handle that fits perfectly in your hand.
  • Compact
    • Smaller than 180mm, you can put it in your tool box. They are great for craft work and finishing touch. Great for DIY.
  • Straight handle
    • Our saws with straight handles are mostly for indoor use. There are single edge saws and double edge saws.
  • Special surface treatment
    • Surface of the blade is coated with nickel, and it prevents rusting.
  • Laser marking
    • Item number of spare blade is marked on the blade for identifying which blade to purchase. Details are permanently marked by laser.
  • Impulse hardening
    • The surface of the blade is super hard but inside is flexible. They are strong against fruction and they last longer.

Characteristics of teeth

For more details, click the icon.

  • Rip cut blade
    • Edges on rip cut saws are flat. It cuts the material like a chisel.
  • Rip cut decreasing pitch
    • Teeth pitch is bigger towards the tip of the blade. Teeth becomes smaller towards the handle.
  • Cross cut blade
    • Cross cut saws cut wood fibers at certain width. If you use cross cut saw for making rip cut, you cannot make smooth and easy cuts.
  • Hijirime
    • Hijirime is making variation on the height of the teeth edges. It greatly improves cutting quality. Lower edges removes saw dust.
  • Teeth with sets
    • By putting sets on the teeth, it prevents the blade from being stuck in between the material.

Product specification

ClassificationArt. No.NameBlade LengthBlade ThicknessCutting WidthTeeth PitchJAN CodePrice
Main body291WRAZORSAW 180 RYOBA Rattan Handle -Trade only products-180mm0.5mm0.81mm
0.79mm
1.5mm
3.7-2.7mm
4903524300211Open price
Spare bladeS-291Spare blade for
RAZORSAW 180 RYOBA
4903524229116Open price
*Cutting width and teeth pitch on the first row are for cross cut teeth, and the ones on the second row are for rip cut teeth.

List of J series specifications

ClassificationArt. No.Product NameBlade LengthBlade ThicknessCutting Width Teeth PitchJAN CodePrice
Main body291RAZORSAW 180 RYOBA180mm0.5mm0.81mm
0.79mm
1.5mm
3.7-2.7mm
49035240291122,610yen
Main body291WRAZORSAW 180 RYOBA Rattan Handle -Trade only products-4903524300211Open price
Spare bladeS-291Spare blade for
RAZORSAW 180 RYOBA
4903524229116Open price
*Products listed above have compatible blades.
RAZORSAW MANUFACTURING CO.,LTD. 1323-29, Kashiyamacho, Ono-shi, Hyogo
TEL: 0794-63-1100 FAX: 0794-63-5166

copyright (c) RAZORSAW MANUFACTURING CO.,LTD. All right reserved.